1970 C10 Wiyh Gmc Front End on 2040-cars
Schoolcraft, Michigan, United States
This truck has the front clip and frame from a GMC 1/2 ton. The title, cab, bed are 1970 Chevy. The cab is a K cab from a 4 wheel drive with the removable trans tunnel. It has 2" drop spindles. The coils are gone and is sitting on blocks in the photos. The frame has been coated with Eastwood rust encapsulator and top coated with Rustoleum Hammered paint. It is not perfect but looks good. Fenders are ok, not great. The hood is clean with a couple dents. The cab has new floors and rockers. The bed was a dual tank model but the holes were filled. The body work is rough but not much rust in the bed floor or bedsides. Tailgate is solid but latch is froze. I have the 350 but it is not currently in the truck. It ran great when removed but needs valve seals. It came from a car according to the prior owner so not sure if it is a 2 bolt or 4 bolt main block. I also have the 4 speed that came out of a car. I am not sure of the make or model. I do not have the flywheel or clutch. Great start to an awesome project. Sold as is where is. I do not have a way to deliver. Cash or certified cashiers check. Truck will have to be picked up by December 21st.
|
Chevrolet C/K Pickup 1500 for Sale
Auto Services in Michigan
Waterford Collision Inc ★★★★★
Varney`s Automotive Parts ★★★★★
Tuffy Auto Service Centers ★★★★★
Tuffy Auto Service Centers ★★★★★
Tri County Motors ★★★★★
The Brake Shop ★★★★★
Auto blog
Mother's Day Suggestion No. 2,506
Thu, 02 May 2013With Mother's Day coming up, we're always looking for new gift ideas to celebrate the occasion, but hot laps around a track might not be the best suggestion for Darius Khashabi. In a video posted on YouTube, Khashabi straps his mom into the passenger seat of his C6 Corvette Z06 for some laps around Sonoma Raceway (formerly Infineon Raceway) at "60 percent" with comical results.
Now this isn't the first time Mama Khashabi has gotten seat time in her son's car around a track, as his YouTube page shows him pulling a similar stunt - with similar results - around Mazda Raceway Laguna Seca last year. Scroll down for the video, but know that the action really gets going at around the 1:40 mark.
UAW to vote on strike at Kentucky Corvette plant
Tue, 08 Apr 2014The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."
The Opel GT is the concept General Motors should build for the US
Sat, Feb 27 2016Now is the time. General Motors should double-down on performance cars and build the Opel GT concept that's set to debut next week at the Geneva Motor Show. Better yet, sell it in the United States as the Chevy GT. Consumers are showing a thirst for performance cars not seen in decades. Ford has them coming in waves, with everything from the F-150 Raptor to a hotted-up Fusion. FCA US is unrepentantly building loads of Hellcats. GM should respond. The General's cupboard is hardly bare. With the Corvette, Camaro, and Cadillac's V-Series, GM has more than enough to compete with its crosstown rivals and anything Europe or Japan can throw at it. But there's also an opportunity. There's not many front-mid-engine, rear-wheel-drive, two-seat sports cars out there like the Opel GT concept. A Chevy GT that used that layout and captured some of the concept car's proportions and curves would ignite a different kind of passion in enthusiasts. It would be Miata-like. With Chevy branding, this sports car would be the everyday exotic. The concept has a turbocharged 1.0-liter three-cylinder engine, which makes about 143 horsepower to motivate a structure that weighs less than 2,200 pounds. It can hit 60 miles per hour in less than eight seconds. All of those numbers are within the front-engined Miata's territory. This new Opel is inspired by two great mid-1960s concepts that helped put its design studio, and that of its sister brand, the British Vauxhall, on the map. (The GT concept is also technically a Vauxhall, as the brands are linked in GM's European strategy.) One of them, the '66 Vauxhall XVR remained a concept. The '65 Opel Experimental GT was on the road by 1968. That shows this is doable. There's precedent. The Saturn Sky and Pontiac Solstice shared a chassis with a modern GT during that trio's brief run. If GM ever makes this concept, Opel and Vauxhall should get their versions. But Chevy is the one that could make this car a global icon. Chevrolet GT. Make it happen. News & Analysis News: The potential return of the Ford Bronco is generating a ton of attention. Analysis: That's not news, per se. But when the Bronco6G.com fan site did a rendering of a next-generation Bronco, it almost broke the Internet. Everyone from Automotive News to Jalopnik picked up the illustrations. Our own post has drawn a lot of traffic and passionate responses. People are clamoring for the Bronco's return.