Chevy Classic Pickup C10 on 2040-cars

Auto blog

GM tells 2021 Chevy Express and GMC Savana owners to park vans outside due to fire risk

GM is telling owners of certain 2021 Chevrolet Express and 2021 GMC Savana work vans to park them outside and away from other vehicles and structures due to a fire risk. Additionally, the company is recalling 10,154 of the vans it believes to be at risk of catching fire. The breakout is 7,891 for Chevy and 2,223 for GMC.  Only vehicles equipped with the 6.6-liter V8 (the new-for-2021 engine option) are included in the recall, and it’s limited to vans produced on or prior to December 7, 2020. The problem stems from some anti-rotation tabs on the positive battery terminal that are too close to a fuse block assembly attachment post. This lack of clearance could cause the tabs to come into contact with the fuse block, causing a short circuit. GM points out that a short-circuit of this nature could cause battery drain or lead to a fire under the hood. Your warning for the time being will come in the form of a low battery voltage warning, or you might just wake up with an unexpected dead battery. GM says that it first opened an investigation into this problem on January 26 this year after it was notified of an underhood battery fire on a 2021 Express. The investigation found three other underhood fires and concluded that these fires were originating from the positive battery cable attachment near the fuse. This recall was officially posted on March 11 this year, and the National Highway Traffic Safety Administration just sent a notification out to the media yesterday. The fix is a relatively simple one. Dealers are going to remove a portion of the anti-rotation tab on both positive battery cable terminals near the fuse block assembly attachments. This increases the clearance and eliminates the risk of fire, GM says. The job will be done under warranty, and GM says it will begin contacting owners for recall work on May 3 this year. Recalls Chevrolet GMC Safety Minivan/Van Commercial Vehicles

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.