87 Chevy Silverado*only 50k Miles*5.7 Tbi,700r4*new Ac*look At Pics! on 2040-cars

Auto blog

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

The Chevrolet Camaro 1LE returns with V6 or V8 power

The Chevy Camaro's performance variants are legendary, and enthusiasts have long lusted after the Z/28 and ZL1. But there's a lesser-known model that shouldn't be overlooked: the 1LE. It's Camaro code for performance on the track. The 2017 Camaro 1LE debuts this week at the Chicago Auto Show and goes on sale late this year. The 1LE package will be offered for the first time on V6 Camaros, as well as the traditional V8-powered SS. The cars have upgraded suspensions, better brakes, aerodynamic treatments that create more downforce, and improved cooling features. The goal is simple: faster laps. "This is all grip and handling and cooling," said Todd Christensen, Camaro marketing manager. It's an enthusiast special, transforming your basic Camaro into a more capable track machine. The 335-horsepower V6 and 455-hp V8 are unchanged (and only come with six-speed manual gearboxes), because the focus is on improving the Camaro's reflexes. That means different things, depending on the engine choice. Here's how they break down. V6 1LE The V6's 1LE package is based on the LT trim and it pilfers the best chassis pieces from the V8 model, including the FE3 suspension with stabilizer bars. It also has a mechanical limited slip differential (3.27 ratio) and four-piston Brembo brake calipers in front. The fuel system is also borrowed from the SS, and it all rolls on 20-inch forged aluminum wheels wrapped in Goodyear Eagle F1 rubber measuring 245/40R20 in front and 275/35R20 in back. Christensen says Chevy added the 1LE pack for the V6 because customers actively wanted it, and for a reasonable price (we hear the 1LE will cost about the same as the fifth gen's $3,500 option) they can transform their V6 into a car that's as track capable as the SS. While it's giving up 120 hp, a V6 Camaro 1LE will also be more than 200 pounds lighter than the eight-cylinder 1LE. Chevy noticed the customer interest for a V6 1LE and will study offering the pack on Camaros with the turbocharged four-cylinder engine. Consider the V6 a test case. "I'm anxious to get some customer feedback [from the V6]," Christensen said. SS 1LE Even though it's heavier, the SS 1LE offers a lot of goodies that make it three seconds faster than a normal SS, according to Chevy's testing at Willow Springs Raceway in the California desert. The spotlight features in the SS are Magnetic Ride Control for the FE4 suspension and electronic-slip differential (3.73 ratio).

GM marks 500 million vehicles

General Motors is marking a major global milestone, as 500 million vehicles have rolled off its assembly lines since the company's founding in 1908. To mark the occasion, the automaker is continuing to invest in production and offering a one-time discount to some customers. GM North America boss Alan Batey used the festivities to announce the Fairfax Assembly factory in Kansas as one of the sites earmarked for the company's $5.4 billion in upcoming investments. The plant will get $174 million of that money for new equipment and technology to build the 2016 Chevrolet Malibu. Among the upgrades will be a shake-and-rattle booth that will simulate road conditions to find squeaks. To commemorate both the production milestone and the Fairfax plant, Batey and company CEO Mary Barra also gave away a 2016 Malibu to a wounded Iraqi war veteran, and the two execs announced that in the third week in May all GM employees can share a one-time customer appreciation discount with friends to help get them into the automaker's products. Barra also gave a speech to the workers there about some of the other milestone's in the company's history, which you can read below. Innovation on the Line: GM Manufacturing Milestones Many of General Motors' most important innovations have occurred behind the scenes, in its manufacturing facilities. Concepts such as changeover, flexible assembly, automation, computer simulation, machine vision and robotics were developed at GM. Over the decades these innovations have helped enable improvements in vehicle quality, efficiency and competitiveness. 1901: Ransom Olds' famous Curved Dash Oldsmobile, designed with simplicity, reliability and value in mind, was the first American car built in a factory designed specifically for automobiles and in standardized volume production. GM acquired Oldsmobile in 1908. 1908: Cadillac wins the Dewar Trophy, Europe's most prestigious award for precision and excellence in manufacturing, by demonstrating the auto industry's highest standards for precision and interchangeability of parts by disassembling three Cadillacs and mixing the parts randomly before reassembling and driving them before a contingent of judges. 1922: GM hires William Knudsen to lead Chevrolet's turnaround. Knudsen implements flexible mass production, which helps Chevrolet incorporate annual styling changes and take market share from Ford.