1987 Chevrolet C-10 Restomod on 2040-cars

Auto blog

More 2017 Chevy Bolt powertrain details revealed

We've seen the production version of the Chevy Bolt electric vehicle. We've driven a prototype version. And now it's time to get some details about the powertrain. After the production version's reveal at CES last week, GM trotted out the Bolt EV for its Detroit debut this morning. The company brought with it a bunch of technical specifications. We'll start with the most important part of an EV: the battery. GM has put a 60-kWh lithium-ion battery that weighs just just 960 pounds into the floor of the Bolt. As previously announced, the Bolt's 288 cells will be able to go over 200 miles on a full charge. That full charge takes nine hours on a Level 2 EVSE thanks to the onboard 7.2-kW charger. Of course, a full charge won't be that important most days, which is why GM says that you can get 50 miles of range in "less than two hours" on Level 2. There's a SAE Combo DC fast charging option as well. The battery will have an eight-year/100,000-mile warranty. The Bolt will be able to sprint up to 60 miles per hour in "less than seven seconds" thanks to a 150-kW/200 horsepower motor in the Bolt. The motor is a new GM design that can produce up to 266 pound-feet of torque. The Bolt uses a shift-by-wire system and an, "offset gear and shaft configuration tailored to meet efficiency and performance targets." The Bolt EV's powertrain has a 7.05:1 final drive ratio. You can read all of the details direct from GM below. Related Video: Drive Unit and Battery at the Heart of Chevrolet Bolt EV Engineers focus on careful balance of range and performance DETROIT, Mich. – The 2017 Chevrolet Bolt EV does more than set a new benchmark for affordable, long-range EV driving. It also raises the bar when it comes to driving performance. Engineers developed the Bolt EV's propulsion system to offer more than an estimated 200 miles (based on GM estimates) and a delightful driving experience that's more akin to a compact sports sedan than a small utilitarian crossover. "Being the leader in range and affordability means nothing if the car isn't going to excite you each time you get behind the wheel," said Josh Tavel, Chevrolet Bolt EV chief engineer. "That's why the team was tasked with delivering a propulsion system that would also make the Bolt EV an electric vehicle that owners would love to drive." Single Motor Drive Unit Like most EVs on the road, the Bolt EV's drive system uses a single high capacity electric motor to propel the car.

Chevy, GMC and Ram dealers are worried they'll run out of new pickups

One of the unexpected side effects of the ongoing coronavirus pandemic is a shortage of pickups at Chevrolet, GMC and Ram dealers. Supplies are running out, and the factories that build these trucks remain closed. Stores across the nation began increasing incentives in March, when the first stay-at-home orders were issued, in a bid to continue luring buyers into showrooms. They also launched online sales channels, or expanded their existing digital business. Sales nonetheless plummeted in April 2020, but in-demand vehicles, like the Ram 1500 and the Chevrolet Silverado, are still selling relatively well thanks in part to the aforementioned incentives. Pickups outsold sedans for the first time in April 2020, according to The Detroit News, by 17,000 units. The problem is that General Motors, Fiat Chrysler Automobiles (FCA), and Ford temporarily closed their factories in March. "The pipeline is very dry," said Mike Maroone, the CEO of a large dealership group named Maroone USA, in an interview with Automotive News. He told the publication his Chevrolet stores are sitting on a 30-day supply of the Silverado, which is one of America's best-selling vehicles. "That is a problem for us," he concluded. Coronavirus-related lockdowns and factory closures compound problems already faced by dealerships who represent General Motors-owned brands. They entered 2020 with a thinner inventory than a year earlier due to the 40-day United Auto Workers (UAW) strike that paralyzed the company late in 2019, and the 0%, 84-month offers announced in March have sapped supply. Ram wasn't affected by a strike, but it has relied heavily on generous incentives to move trucks off lots. Ford, on the other hand, limited incentives to 2019 models. Inventory levels differ greatly from region to region. The national average for the Silverado stood at an 82-day supply in March 2020, down from 120 in March 2019. Ram stores had a 114-day supply of the 1500 (compared to 134 a year earlier), while Ford bucked that trend with a 111-day supply versus 84 in 2019. Don't panic if you're in the market for a truck; we're not facing a complete drought. Automotive News added that America's light-duty pickup inventory could fall to 400,000 units by the end of May, and drop further to 260,000 units in June. For context, there were about 700,000 light-duty trucks in stock in May and June of 2019. That's unquestionably a sharp drop, but there will still be over a quarter of a million trucks to choose from.

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.