1986 Chevrolet C10 Custom Hot Rod Street Rod on 2040-cars
Meridian, Mississippi, United States
Body Type:Standard Cab Pickup
Vehicle Title:Clear
Engine:v8 383 stroker
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: custom
Options: CD Player
Drive Type: automatic
Mileage: 5,000
Exterior Color: Burgundy
Warranty: Vehicle does NOT have an existing warranty
Interior Color: Burgundy
i have a 1986 chevy c10 with a 1987 front clip. it has a 383 stroker motor bored .30 over wich is a 385. true double hump heads,10:1 compression,roller rockers,competition cam,flat top pistons,holley 750 double pumper that i had fully rebuilt 6 weeks ago,torquer 2 intake. i pulled the motor 2 months ago and had the motor totally rebuilt, the motor has approx. 200 miles on it. Transmission was rebuilt 18 months ago and i had a 3500 stall converter put in it. The truck is extrememly strong and very fast. Full custom tweed interior,touchscreen dvd navigation,bucket seats,tonneau cover,custom paint job,24"rims and tires that are brand new purchased them 4 months ago tires stil have the nipples on them, mcaughy's 6"-4" lowering kit,rear end has 308 gears and is limited slip,and JB1 brakes. Im sure i missed some stuff but if you have any question u can call if you are a serios buyer. Thanks 334-372-1212 Oh yea i also have videos of the truck if you want me to send them to ur phone. A $500 deposit is due within 24 HRS of the close of the auction. Available for local pickup or shipping is available at buyers expense. Good luck
Chevrolet C-10 for Sale
1965 chevy pickup(US $10,500.00)
Chevy c10 short bed
1969 chevy c-10 swb stepside shop truck cruiser hot rat rod short bed
1971 chevrolet c10 cheyenne automatic(US $2,750.00)
1967 chevrolet factory 4wd short bed (frame off restoration)
Original a/c, manual transmission, 4x4 project truck in need of restoration
Auto Services in Mississippi
Xpert Tune Inc ★★★★★
Taylor Automotive ★★★★★
Tapp`s Neil Automotive Collision Center ★★★★★
Sledge`s Wrecker Service ★★★★★
Pro Audio Center ★★★★★
Platinum Collection ★★★★★
Auto blog
Cadillac could base its entry-level sedan on the Chevy Cruze [UPDATE]
Wed, Apr 27 2016UPDATE: Cadillac spokesperson Donny Nordlicht tells Autoblog , "The post speculating on a future Cadillac model derived from the Chevrolet Cruze is completely false." Premium automakers Mercedes-Benz and Audi have seen plenty of success with new small front-drive-based sedans. The CLA-Class had its best January ever this year, while Audi moved more of its new A3 in 2015 than its predecessor sold in 2005 through 2010 combined. The fact that Cadillac wants a piece of that pie is no surprise, then. There's a new rumor that GM's luxury brand could launch its own compact – possibly called CT2 – to battle the Germans. Cadillac, a brand that's pushed hard to rebuild its rear-drive reputation, could develop a new entry-level model based on the front-wheel-drive 2016 Chevrolet Cruze's D2XX platform. Go ahead and make your Cimarron jokes. Sources are telling GM Inside News that a Cadillac built on the Delta platform would ditch the Cruze's turbocharged 1.4-liter four-cylinder for a 1.5-liter turbo in base models. General Motors' well received 2.0-liter turbo four would serve in higher-end models. According to GMIN, the Delta-based Cadillac would likely command a $6,000 to $9,000 premium over the Cruze, so figure $23,000 to $26,000 on the low end to $30,000 to $33,000 for something at the top of the range. As much as we dislike the kind of badge engineering that brought us the Cavalier-based Cadillac Cimarron in the '80s, the company has done an admirable job of distinguishing vehicles on shared platforms lately. A Delta-platform Cadillac would at least have a good basis – the new Cruze is surprisingly comfy. That said, we question GM's rationale if this rumor is indeed true. Put simply, Cadillac needs another sedan like I need another student loan payment. The company has four sedans, three of which overlap two segments, and none of which are selling very well. That's not because they're bad, but because customers want crossovers, of which Caddy has but one – the new XT5. Spending the time and money to add a fifth sedan to the mix when the company desperately needs to flesh out its CUV range would be a tremendous mistake. As much as we hate to say it, if Cadillac really wants to add a small, entry-level car to its range, it'd better be a crossover. Related Video:
GM puts 3 million miles on hydrogen fuel cell test fleet
Mon, May 12 2014Have General Motors' hydrogen fuel-cell vehicles emitted enough water vapor over the past six-plus years to equal the steam coming out of Old Faithful? Not exactly, but GM has released a few figures related to the Project Driveway initiative it began in 2007. The numbers are impressive, if not quite of the geyser-spouting variety. In all, the General converted 119 Chevrolet Equinox SUVs to run on hydrogen, and those vehicles have just collectively surpassed the 3 million mile mark. And if you were waiting for us to tell you that the distance equals a half-dozen round trips between the earth and the moon, well, there you go. The better news is that the SUVs have combined to save almost 158,000 gallons worth of gas, and some of the vehicles have more than 120,000 miles on them. More than 5,000 drivers have participated in the project. GM reached that landmark about 10 months after it announced that it was working with Honda to accelerate the development of hydrogen fuel-cell powertrain technology. The two companies estimated last summer that it may have something to sell to the public as soon as 2020. For now, you can check out General Motors' press release below. GM Fuel Cell Fleet Tops 3 Million Miles Chevrolet Equinox fuel cell vehicles driven in real world reach milestone DETROIT – General Motors' fleet of fuel cell vehicles recently passed 3 million miles of hydrogen-powered, real-world driving. Some individual vehicles have accumulated more than 120,000 miles. By GM's estimate, using hydrogen to power these vehicles, the fleet has avoided 157,894 gallons of gasoline consumption. This specially equipped fleet of Chevrolet Equinox Fuel Cell vehicles are part of GM's 119-vehicle Project Driveway program, which launched in 2007. Since then, more than 5,000 drivers have provided feedback on the functionality and drivability of fuel cell technology. "Hydrogen fuel cell technology is an important part of GM's advanced propulsion portfolio and we continue to make substantial progress in furthering this technology," said Charlie Freese, executive director of GM's global fuel cell engineering activities. "These vehicles have operated through seven full winters and a wide range of environmental conditions, proving that fuel cells can meet the demands of real-world drivers." Last year, GM announced two fuel cell-related collaborations.
Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]
Thu, Jan 8 2015With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.