Find or Sell Used Cars, Trucks, and SUVs in USA

1978 Chevrolet C10 Suburban Custom Paint, Wheels, Tires, Dual Suspension on 2040-cars

Year:1978 Mileage:100000 Color: Blue
Location:

Oceanside, California, United States

Oceanside, California, United States
Advertising:
Transmission:NONE
Body Type:Sport Utility
Engine:5.0L 305Cu. In. V8 GAS OHV Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Year: 1978
Number of Cylinders: 8
Make: Chevrolet
Model: C10 Suburban
Trim: Custom Deluxe Sport Utility 4-Door
Warranty: NONE
Drive Type: RWD
Mileage: 100,000
Exterior Color: Blue
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

The motor and transmission were removed operating from this Suburban in April 2013. In 2001 this vehicle was fully restored by my Father, everything was profe$$ionally done by Xtreme fabrication and Rollies Automotive in Escondido CA. Custom front shock hoops, 1 ton rancho springs and pro comp dual shocks in the front. There is a shock tower brace that goes over the motor. extra leaf spring added in the rear and dual shocks on the rear. This project could be used for parts to complete yours then scrapped (Lots of heavy metal on this).... or it could be finished to drive once again!!! 33" Tires are 9 years old, but only had 1k miles on them and there is rust spots here and there. The front and rear fenders were professionally cut and rolled to fit 40" mickey thompsons tires with the use of the bigger springs and 3" body lift.

In 2004 I decided to hit another car, banging up the front right fender. The steering gearbox broke a weld and needs to be fixed. But is an easy fix for anyone one with welding experience. The right side of the front tubular bumper was cut off then as well. Nerf bars are welded on for the side steps. There are still several lights mounted front and rear and were working last time they were used. Hella and pro comp.  The interior is all there and there but torn on the front bench seat, the rear 2 benches are in great condition.

Still installed, and not included at this price is the rear drive line internals, it is a Detroit locker with 5.10 Detroit gears (I spent $1500 on the gears/locker alone!!!). This equipment can be included for an additional $500, or will be removed before the sale. 

Auto Services in California

Yes Auto Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 1602 W Adams Blvd, Universal-City
Phone: (323) 731-3728

Yarbrough Brothers Towing ★★★★★

Auto Repair & Service, Towing, Automotive Roadside Service
Address: 4291 Santa Rosa Ave, Duncans-Mills
Phone: (707) 571-8866

Xtreme Liners Spray-on Bedliners ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 903 Kansas Ave, Ceres
Phone: (209) 872-8017

Wolf`s Foreign Car Service Inc ★★★★★

Auto Repair & Service, Brake Repair
Address: 7904 Engineer Rd, National-City
Phone: (858) 565-2666

White Oaks Auto Repair ★★★★★

Auto Repair & Service
Address: 1386 White Oaks Rd, Redwood-Estates
Phone: (408) 559-0301

Warner Transmissions ★★★★★

Auto Repair & Service, Auto Transmission, Brake Repair
Address: 1112 Erickson Rd, Clayton
Phone: (925) 421-2912

Auto blog

Chevy Chaparral 2X Vision Gran Turismo concept blends the past and the future

Wed, 19 Nov 2014

The Chevrolet Chaparral 2X Vision Gran Turismo is the rare concept car that salutes a seminal moment in history, yet also borders on science fiction.
Revealed Wednesday at the Los Angeles Auto Show, the concept uses the name of one of Chevy's historic racing partnerships, with Chaparral Racing, which dates to the 1960s. Chaparrals raced successfully at a range of levels, including IndyCar, Trans-Am and SCCA competition.
But the history ends there, as the concept's main purpose is as a racecar in a downloadable update for the PlayStation 3 game Gran Turismo 6.

GM recalling 686k Lambda-platform models for hatch repair

Fri, Jul 10 2015

General Motors is recalling 686,287 units of its Lambda platform crossovers. On models equipped with a power rear hatch the system can potentially fail. This campaign includes the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, and 2007-2010 Saturn Outlook. According to GM's documents to the National Highway Traffic Safety Administration (as a PDF), dirt can get into a portion of the strut that holds up the hatch and cause the part to prematurely fail. There's a redundancy in place called the Prop Rod Recovery system that's designed to shut the liftgate if there's a malfunction. However, if the breakdown happens too quickly after the hatch is opened the prop rod might not work the way it's supposed to. If someone were in the way of the falling liftgate, they could be hurt. For the repair, dealers will update the software for the power liftgate actuator motor control unit to prevent the hatch from closing so quickly. They'll also check the operation of the system afterward. Related Video: RECALL Subject : Liftgate Struts may Fail and Liftgate may Fall Report Receipt Date: JUN 30, 2015 NHTSA Campaign Number: 15V415000 Component(s): STRUCTURE Potential Number of Units Affected: 686,287 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2008-2012 CHEVROLET TRAVERSE 2009-2012 GMC ACADIA 2007-2012 SATURN OUTLOOK 2007-2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. CONSEQUENCE: If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The manufacturer has not yet provided a notification schedule.

GM to build next-gen Chevy Cruze in Mexico

Tue, Mar 24 2015

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.