1972 Chevrolet C-10 Shortbox Big Block Pickup on 2040-cars
Bismarck, North Dakota, United States
Engine:468
Vehicle Title:Clear
For Sale By:Private Seller
Year: 1972
Mileage: 21,911
Make: Chevrolet
Exterior Color: 1972 OCHRE
Model: C-10
Interior Color: Black
Trim: SHORTBOX
Drive Type: 2 WHEEL DRIVE
|
1972 CHEVROLET C-10 SHORTBOX BIG BLOCK PICKUP 1972 CHEVROLET TRUCK OCHRE PAINT WITH BLACK INTERIOR POWERED BY A 454 PUNCHED OUT TO A 468, BOLTED UP TO A 400 TRANSMISSION W/ 3500 STALL. MOTOR AND TRANSMISSION HAVE 2000 MILES ON COMPLETE REBUILD HERE ARE THE STATS ON THE MOTOR; INSTALL CAM BEARING SET BORE AND HON BIG BLOCK DECK V-8 BLOCK EQUAL DISTANCE LINE BORE V8 MAIN BORES PRESS PISTONS R & R BALANCE CRANK INSTALL VALVE GUIDES COMPLETE VALVE JOB NEW CRANK KB PISTONS HV OIL PUMP DBL ROLLER 3/8 HARDENED ROD BOLTS ETC. HERE ARE SOME SOME MEMOS; 11-213-3 COMP CAM 2500-6500 RPM 292 H MAGNUM ADV DUR IWJ 292 DEGRESS EXH 292 DEGRESS DUR @ 050 IWJ 244 DEGREES EXH 244 DEGREES LIFT IWJ.550 EXH .550 110 DEGREE LOBE SEP SOME JIBBERISH THERE BUT SOME OUT THERE WILL UNDERSTAND THIS CHEVY RUNS LIKE A SCARED RABBIT ON STERIODS *****THIS WOULD MAKE A GREAT WINTER PROJECT, AS SOME THINGS STILL NEED ATTENTION , FOR EXAMPLE; DETAIL ENGINE COMPARTMENT DETAIL AND FINISH UP INTERIOR (NOTE NEW SEAT AND DOOR PANELS) SOME RUST REPAIR ON LEFT REAR WHEEL LIP, FLOORBOARDS ARE SOLID THERE IS SOME BONDO OVER TOP OF LEFT REAR FENDER WELL, AND I FOUND SOME JUST IN FRONT AND UP FROM RIGHT WHEEL WELL BED IS DIAMOND PLATE COMPLETE PAINTED BLACK, AND MAYBE COULD USE A WOOD KIT OR EVEN CHROME DIAMOND PLATE FOR THAT CUSTOM LOOK SMALL PDR DENT ON FRONT LEFT FENDER (SEE PICS) OVERALL A NICE LITTLE CHEVY PICKUP FOR FINISHING UP AND HAVING A GREAT SHOW AND GO SHORT BOX C-10 THIS IS PRICED TO SELL AS 85% RESTORED AND SHOULD HAVE NO PROBLEM REACHING RESERVE AND STILL LEAVE ROOM TO COMPLETE BIDS START AT $1000 ANY QUESTIONS EMAIL ME OR CALL ME JIM AT 720-352-3991 HAVE SHIPPING QUOTES AVALIABLE AND CAN HELP WITH SHIPPING GOOD LUCK THANKS FOR LOOKING
|
Chevrolet C-10 for Sale
1986 chevrolet c10 silverado standard cab **super deluxe**shortbed 1/2 ton
1985 chevy 1/2 ton shortbed,restored,no rust,406 stroker,850 holley,700r4 trans,(US $16,500.00)
** shop truck ** patina ** c10 ** the bomb **(US $12,950.00)
1965 chevy c10 truck short bed stepside
Fresh 350ci, fresh 350 turbo, 22" steelie's, new tires, cd player, new interior
1986 4x4 lifted chevy shortbed show truck
Auto Services in North Dakota
Wrenches R US Diesel Truck Repair ★★★★★
Silbernagel Auto Repair ★★★★★
Nereson`s Big Lot Service Center ★★★★★
ALPINE AUTO GLASS and WINDOW TINT ★★★★★
Wolfe Ford Sales & SVC ★★★★
Theel Motors ★★★★
Auto blog
GM recalls trucks and SUVs for brake pedal problem
Thu, Feb 11 2016The Basics: General Motors will recall over 473,000 North American examples of the 2015-2016 Chevrolet Silverado HD, GMC Sierra HD, and police pursuit versions of the Chevy Tahoe. These include 426,573 vehicles in the US and 46,837 in Canada, according to Reuters. The Problem: The brake pivot nut can loosen over time, which can render the pedal inoperative. This would be a danger to drivers trying to stop the vehicles. In some cases, the "Service Engine Soon" light might come on. Injuries/Deaths: None reported. The Fix: Dealers will inspect the pivot bolt, and if necessary they will apply adhesive to it and reinstall the part with increased torque. If You Own One: "We expect to start customer notifications shortly," GM spokesperson Tom Wilkinson told Autoblog. Related Video: Transport Canada Recall # 2016053 Recall Date 2016/02/04 Notification Type Safety Mfr System Brakes Manufacturer Recall Number 20760 Units Affected The number of vehicles or components affected by the recall. 46,837 Category Light Truck & Van, SUV Recall Details On certain Heavy Duty and Police Pursuit vehicles, the brake pedal pivot nut may become loose, causing the brake pedal to be loose or inoperative. If the brake pedal becomes loose or inoperative, it could interfere with the accelerator pedal, and/or the driver may be unable to safely stop the vehicle through application of the brake pedal, potentially affecting stopping distances and increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the pivot bolt installation to determine whether the vehicle has already received the production remedy. If not, the dealer will add adhesive to the nut, and reinstall the nut at an increased torque. Note: This condition may result in the "Service Engine Soon" light illuminating, and brake lights may stay on longer than expected. Make Model Model Year(s) Affected CHEVROLET SILVERADO 2015 2016 CHEVROLET TAHOE POLICE PURSUIT VEHICLE 2015 2016 GMC SIERRA 2015 2016
GM adds 1,200 jobs at Detroit-Hamtramck plant
Thu, Oct 22 2015General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.
There's an impending shortage of new trucks in America's heartland
Thu, May 21 2020URBANDALE, Iowa — Jerry Bill is worried the novel coronavirus could hurt business at the Des Moines auto dealership he runs, but not because of a shortage of buyers for the big Ram pickups on his lot. "Our biggest issue will be if we don't get more inventory," said Bill, general sales manager of Stew Hansen Chrysler Dodge Jeep Ram, which sells around 2,700 new vehicles a year in Urbandale, a suburb of Iowa's capital Des Moines. After a drop in sales in April when consumers stayed home, Bill expects pickup truck sales to end May similar to where they were a year earlier. And if demand remains strong, Bill said he will run out of popular models in June. Fiat Chrysler began slowly restarting Ram truck assembly lines on Monday after a two-month shutdown. The U.S. economy contracted in the first quarter at its sharpest pace since the Great Recession of 2007-2009 because of lockdown measures aimed at slowing the spread of the coronavirus. Economists warn the second quarter will be much worse. Still, far from the lockdowns of states like New York, Michigan or Ohio, dealerships like Stew Hansen have provided FCA and Detroit rivals General Motors and Ford a rare bright spot: strong sales of pickup trucks in America's heartland. Overall U.S. sales of cars and light trucks crashed to the weakest pace in 50 years last month. But sales of big Detroit brand pickups, particularly in southern and western states less affected by the outbreak, significantly outperformed the market, industry executives and analysts said. Pickup trucks are one of the most profitable automotive segments in the world. They account for a huge portion of the Detroit automakers' profits and formed a huge lure for Peugeot, which expects to merge with FCA by early 2021. The pressure is now on to boost pickup truck production and send vehicles to dealers in parts of the country with dwindling supplies. That is particularly true for GM, which is running short of certain truck models after losing 40 days of production to a strike last fall. "If you don't have what someone wants, they can choose to go to another brand," said Cox Automotive analyst Michelle Krebs. 'Easiest swap ever' Detroit automakers in March rolled out large discounts — such as interest-free loans for seven years — to keep vehicles rolling off dealer lots.
2040Cars.com © 2012-2025. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.039 s, 7940 u



















