1971 Chevrolet C-10 on 2040-cars

Auto blog

Chevy Malibu will become 45-mpg strong hybrid with next update

Come next year there'll be no more mild hybrid pretensions for the Chevrolet Malibu - the next-generation sedan will borrow technology from the 2016 Volt and get a proper hybrid powertrain. A 1.8-liter four-cylinder engine gets help from a two-motor drive unit adapted from the Volt for 182 system horsepower, the motor drive powered by an 80-cell, 1.5-kWh lithium-ion battery. Chevrolet says that when combined with features like grille shutters and a lower ride height, it expects the Malibu Hybrid will post a combined fuel economy rating of more than 45 miles per gallon, which would best the hybrid trims of the Ford Fusion, Toyota Camry and Hyundai Sonata. Electric power alone can power the car up to 55 miles per hour, and The Bowtie's first use of exhaust gas heat recovery will help maintain high hybrid performance in cold weather and be used to heat the engine and cabin. The Malibu Hybrid should go on sale in the Spring of next year, for now there's a press release below. Chevrolet Malibu Hybrid Derives Technology from Volt GM estimates combined fuel economy ratings to exceed 45 mpg DETROIT, 2015-03-25 – Chevrolet's recent production announcement of its all-electric vehicle based on the Bolt EV concept, as well as the introduction of the 2016 Chevrolet Volt, will be joined by a strong hybrid version of the next-generation Malibu. Using technology from the 2016 Chevrolet Volt propulsion system, Malibu Hybrid will offer an estimated combined fuel economy rating exceeding 45 mpg, higher than the combined mileage ratings of the Ford Fusion, Toyota Camry and Hyundai Sonata hybrid variants. "The 2016 Malibu Hybrid will offer impressive fuel economy, exceptional driving characteristics and gorgeous styling," said Jesse Ortega, Chevrolet Malibu chief engineer. "Besides leveraging innovation from the Chevrolet Volt, the Malibu Hybrid also has unique features that help improve aerodynamics, like upper and lower grille air shutters to improve airflow and a reduced ride height, all of which help reduce fuel consumption," Ortega said. An all-new direct-injection 1.8L 4-cylinder engine mated to a two-motor drive unit slightly modified from the 2016 Chevrolet Volt drive unit powers the Malibu Hybrid. The drive unit provides additional power to assist the engine during acceleration, for 182 horsepower (136 kW) of total system power.

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.

Experimental mid-engine XP-819 Corvette going up for auction

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.