1968 C-10 Swb Frame Off Restoration on 2040-cars
Oklahoma City, Oklahoma, United States
Transmission:400
Vehicle Title:Clear
Mileage: 30
Make: Chevrolet
Exterior Color: Black
Model: C-10
Interior Color: Red
Trim: CUSTOM
Number of Cylinders: 8
Drive Type: AUTO
The only thing left to do is what a new owner wants to do ! Pic out wheels and tires and a system to make this YOUR BADASS 68' !!! These 67-72 trucks are sought after for an obvious reason they are the coolest designed trucks ever (muscle trucks). And the only thing that makes one better then another is color combo and IMO this truck has the best colors Chevrolet made ! This truck is a REAL black and red 68' that I have spent 2 years restoring as my personal truck but a new business venture makes me sell her, it is finally done I've put about 30 miles on this truck and it is ready for a new owner to show her off. I will describe all the work from the top down.......
The body of this truck was in better then average shape, but being a black one means being diligent with making it strait so a lot of hours went into the body work. It was sprayed with epoxy through the whole process and came out really nice.
The paint we used in our opinion is the best, Diamont R-M D-403 Black for the base coat and Diamont R-M 5335 Clear to make it shine, (THIS IS SHOW QUALITY PAINT)......... The paint was sprayed by one of the best painters around so there's no tiger stripes anywhere and 3 coats of clear that's been color sanded and polished, NO ORANGE PEEL. The paint and body work came out to look Badass. And every piece of trim is new !
The interior is ALL NEW and redone back to original this is the original seat and steering wheel in great shape just recovered the seat. Everything that is red is new, all door rubbers are new with felts, windshield is new and yes it has wipers but I keep them under the seat there very easy to take off and put on, I think it looks better without. I also added a tilt column from a 72' van so it has the shorter shifter and aftermarket linkages that work great. From the drivers seat looking out over that shiny black hood with the wheel in your lap and your arm on the door is something everyone should experience!!!!
The motor is all new, its a 010 4 bolt block that's 30 over making it a 355 it has TBI heads with a 600cfm eddy carb and a cam to match. This motor was built for daily driving with MPG's in mind, but it was also built for torque and will surprise you with how strong it runs rated at 285hp and 340ftlbs it will wag its tail going into 2nd gear. The exhaust is 2 1/2" dumped at the rearend with a very unique sound that's not loud coming from mufflers of a 2003 mustang gt, I was looking for something different then what you always hear from flowmaster or dynomax and all the other cooky cutter mufflers this truck is quite when you want and can get loud when you want, very cool sound.
The transmission is a fresh 400 with a 2000 factory high stall converter with a mild shift kit and 373 gear ratio, this combination works very good.
5 lug conversion has been done so you get power disc brakes all new, the braking power is impressive. You also get power steering that's new and works effortlessly. The truck has been lowered 3" up front and 4" in the rear for a nice low truck stance, if you want it lower its easy with lowering blocks in the back.
The chassis and components were sand blasted, primed and then sprayed with POR-15 chassis paint, so the underneath of this truck looks good. All parts underneath from uppers and lowers to shocks, cab mounts, wheel bearings and everything in between is new. This truck is tight and solid with NO rattles, and will actually handle corners impressively !
The bed floor isn't perfect I planned on using the bed so I sprayed it with POR-15, it didn't bother me but you can put in a mat or rhino line.
We all know what this truck would look like with wheels ! but everybody has different taste and some of us know you can ruin a vehicle by choosing the wrong wheels, happens all the time LOL. So I left the personal touch and easiest part up to the new owner, there's many different wheels that would work with this truck from 20s to wide whites or even a black steel wheel with red line tires, its up to you have fun. I also know some guys think they have 30k trucks that are a joke, especially on ebay. I don't live in a fantasy but I did build a sweet ride and built it right, no telling what some of these other guys would want for this truck but I have it priced to sell so taking in count for the wheels and tires, THE RESERVE ON THIS TRUCK IS WELL BELOW 20K!!!!! Good Luck.. It is for sale locally also. Call for any questions 405-204-0058
On Jan-31-13 at 10:09:53 PST, seller added the following information:
http://youtu.be/HJXily8k8UE
On Jan-31-13 at 10:44:20 PST, seller added the following information:
http://youtu.be/HJXily8k8UE
Chevrolet C-10 for Sale
1971 chevrolet cheyenne short bed truck
1970 chevrolet c10 stepside pickup 350 automatic ps pb dual exhaust look at this(US $7,999.00)
Rare 67 chevrolet c10 cst short bed with air ride
87 sivarodo
1968 chevrolet c10 454 big block automatic pb dual exhaust tach have to see(US $5,999.00)
Cab-off resto on bare bones/low mileage california/texas example
Auto Services in Oklahoma
Valley Body Shop ★★★★★
Shade-Makers ★★★★★
Safelite AutoGlass ★★★★★
Precision Auto ★★★★★
Owasso Automotive Care ★★★★★
Nicoma Park Muffler ★★★★★
Auto blog
Chevrolet To Oversee Restoring Sinkhole Corvettes
Fri, Feb 14 2014What Mother Earth devoured, Chevrolet plans to resurrect. The carmaker said Thursday it will oversee restoration of the classic cars swallowed by a huge sinkhole beneath the National Corvette Museum in Kentucky. General Motors Design in Warren, Mich., will manage the painstaking work to repair the eight prize vehicles, the automaker said Thursday. The cars were consumed when the earth opened up early Wednesday beneath a display area when the museum in Bowling Green, Ky., was closed. No injuries were reported. The museum was open Thursday except for the area where the sinkhole occurred. Mark Reuss, GM's head of global product development, said the damaged vehicles rank as "some of the most significant in automotive history." "There can only be one 1-millionth Corvette ever built," he said, referring to one of the damaged cars. "We want to ensure as many of the damaged cars are restored as possible so fans from around the world can enjoy them." Just how the cars will be pulled out of the ground remains to be seen, said museum executive director Wendell Strode. The local fire department estimated the hole is about 40 feet across and 25 to 30 feet deep. The hole opened beneath part of the museum's domed section. "We feel pretty confident that most of the cars can be extracted," Strode said Thursday. "And we hope and believe that with just a little bit of luck, that all eight cars can be extracted and be part of the restoration." Chevrolet spokesman Monte Doran said some of the cars look to be in good shape, while others are buried in rubble. "It will likely be several weeks until we can get the cars out and assessed," he said. The GM Design team has helped restore other historic cars, but the Corvette project looks to be its biggest, he said. "These Corvettes are part of our history, and they want them restored properly," Strode said. "We're thrilled they're doing this." The cars looked like toys as they plunged into the hole, piled in a heap amid dirt and concrete fragments. The museum owns six of the cars while two - a 1993 ZR-1 Spyder and a 2009 ZR1 Blue Devil - are on loan from General Motors. The other cars damaged were a 1962 black Corvette, a 1984 PPG Pace Car, a 1992 White 1 Millionth Corvette, a 1993 Ruby Red 40th Anniversary Corvette, a 2001 Mallett Hammer Z06 Corvette and a 2009 white 1.5 Millionth Corvette. Pictures of the sinkhole showed a collapsed section of floor with multiple cars visible inside the hole.
Domino's reveals Chevy Spark-based delivery car
Wed, Oct 21 2015Next time you order from Domino's Pizza, check out the delivery car. In an effort to get hot and fresh pizzas to hungry customers, the company is creating a small run of custom vehicles that are tailored for the job. Dubbed the Domino's Delivery Expert (DXP), these 2015 Chevrolet Spark-based hatchbacks pack a plethora of features to provide the perfect pie. When the DXP's on delivery duty, every order should arrive steaming hot thanks to the hatchback's biggest custom upgrade – a warming oven right behind the driver. Accessible from outside, it can keep pizzas at the perfect temperature on the way to your house and hold two of Domino's Heatwave bags. Other than the driver's seat, the rest of the interior also gets replaced with bountiful storage and non-slip surfaces. According to the company, as many as 80 pizzas could conceivably fit inside, and that would be quite a party. The exterior is still clearly derived from the Spark but with some clever additions. An illuminated "Out for Delivery" sign is on the roof, and a puddle light shoots the Domino's logo on the ground. Plus, the company's red-and-blue color scheme is emblazoned over the hood, pillars, and hatch. Underneath all the pizza-related mods, power comes from a 1.2-liter four-cylinder and CVT. Rather than just a one-off stunt, Domino's is working with Roush Enterprises and former General Motors exec Kenneth R. Baker to build 100 DXPs. They're hitting the streets in 25 US cities, and you can check if your locale is included on the project's website. The seed of this idea came from a partnership with Local Motors to crowdsource the ultimate pizza delivery platform. Domino's Launches Purpose-Built Pizza Delivery Vehicle Domino's Innovative DXP™ Created by Three Great Michigan Brands and an International Crowdsourcing Design Competition Ann Arbor, Mich., Oct. 21, 2015 -- In its latest innovation as the recognized world leader in pizza delivery, Domino's (NYSE:DPZ) is launching the Domino's DXP™ (Delivery Expert), a specially designed and built pizza delivery vehicle. The DXP is the combined brainchild of former GM R&D executive Kenneth R. Baker, Michigan-based Roush Enterprises and Domino's. To also include consumers' input, hundreds of concepts were initially identified in an online crowdsourcing design competition hosted by Local Motors. "The Domino's DXP is the first purpose-built vehicle aimed at revolutionizing pizza delivery," said Russell Weiner, president of Domino's USA.
Body shop manager stole over $500,000 worth of government trucks and parts
Fri, Jan 27 2017The US Department of Justice announced yesterday that the manager of a collision and restoration business in Virginia admitted he helped misappropriate and sell vehicles and parts from the State Department. Specifically, he sold 12 Chevrolet Suburbans, a Hummer, and $7,500 worth of tires and wheels. He pled guilty to charges to commit theft of government property and wire fraud. He will likely see 18 to 20 months in prison, a fine of $4,000 to $40,000, and has already agreed to pay restitution of $416,020 and asset forfeiture of the same amount. According to the Department of Justice, the body shop manager, James Ratcliffe, worked with the owner of the business and a State Department official, both unnamed, to obtain the property. It started with the wheels and tires, which were delivered and sold on two occasions, one in 2011 and another in 2012. The trucks came later, and were sold throughout 2011 and 2013. Ratcliffe and the shop owner kept most of the profits, and shared some of the leftovers with the government official. In addition to the vehicles that were sold, the government official also gave Ratcliffe a pair of Suburbans for his own personal use. The Department of Justice estimated the total value of the SUVs at $96,400. In total, the group misappropriated $512,420 worth of property. Related Video:















