1964 Chevy Stepside Pickup on 2040-cars
Seymour, Missouri, United States
|
1964 C-10 Stepside Chevy Pickup. Great Project truck. Not running but have motor and transmission. Extra rear end as well available.
On Apr-24-14 at 08:56:12 PDT, seller added the following information: This truck has been in my family for years. I have the original title dated back to 1974. It was my grandpa's truck and I started restoring it from the ground up. Great project truck!! I have spend $4000 on frame sandblast primed painted & replaced every part on frame springs ,bushing ,bolts ,steering ,components , ball joints ,& changed the front drums to disc brakes. I made it 5 on 5 bolt pattern. I have the 5 on 5 rear end to match. I have spent $4600 on the metal & body work on the cab ,hood , front clip parts ready for paint. I have a extra cab w/glass & doors also a lot of other parts for sale. I have receipts showing the expense I have put into it. I have the original bench seat reupholstered. I am selling as my hobbies have taken another interest and I hate to see such a neat truck sit and collect dust. If you are looking for a great project truck this is a great one to start with. The frame and cab is already done (the hard part ) it just needs body and paint work now !! If interested please call 417-830-7193 or email vinceneiderhauser@yahoo.com more pics available at request. |
Chevrolet C-10 for Sale
Auto Services in Missouri
Wodohodsky Auto Body ★★★★★
West County Nissan ★★★★★
Wayne`s Auto Body ★★★★★
Superior Collision Repair ★★★★★
Superior Auto Service ★★★★★
Springfield Transmission Inc ★★★★★
Auto blog
Fernando Alonso just misses qualifying for Indy 500 on first day
Sun, May 19 2019Former Formula One world champion Fernando Alonso will need a clutch run on Sunday to qualify for the Indianapolis 500 on May 26 after he failed to seal a guaranteed spot on Saturday. The Spaniard tried fives times to put his McLaren Racing Chevrolet in the top 30, but wound up one spot short. He can make the 33-car field only through a six-car shootout on Sunday that will determine the race's final three drivers. "We have another chance to be in the race," Alonso, who is seeking to make his second Indy 500 field, told IndyCar TV. The Spaniard twice got inside the top 30 but both times was bumped outside the mark, with JR Hildebrand and Graham Rahal the final two drivers to seal qualifying spots. Britain's Pippa Mann will be the only woman in the race, qualifying 30th in 227.244 mph. Race positions 10-30 were determined during the day-long qualifying with Saturday's nine fastest drivers set to return on Sunday to decide pole. Spencer Pigot, driving the Ed Carpenter Racing Chevrolet, led qualifying with a four-lap average of 230.083 mph. He was followed by 2018 winner Will Power of Australia (230.081) and Simon Pagenaud of France (229.854). The troubles for Alonso, whose top four-lap average was 227.224 mph, were exacerbated by a punctured tire in his first qualifying run. "That didn't help," Alonso told reporters. "But, obviously, our performance has been quite bad all week. Quite poor." The Spaniard crashed his Chevrolet in practice on Wednesday and missed nearly two full days of practice while a backup car was prepared. He returned on Friday. Alonso said he was worried the McLaren team was "not ready for the challenge." "We've been slow. You see Juncos Racing crashing yesterday and being ready at 6 o'clock. That's impressive," he said. "For us, we've been a little bit slow on everything." Alonso is bidding to join Graham Hill as the only drivers to achieve the 'Triple Crown of Motorsport' with an Indy 500 victory. He previously won the Monaco Grand Prix and Le Mans 24 Hours race. He also won two Formula One drivers' titles. (Reporting by Gene Cherry in Raleigh, North Carolina; Editing by Greg Stutchbury)Related Video: Motorsports Chevrolet McLaren IndyCar
GM under fire from safety advocates over braking problem caused by recall fix
Thu, Feb 6 2020Safety experts are lambasting General Motors over what they say is the automaker’s slow notification of owners of certain 2019 sedans and trucks that a recall fix could cause power braking to fail and increase the risk of a crash, the Detroit Free Press reports. GMÂ’s original recall in December targeted about 550,000 Cadillac CT6 sedans and Chevrolet Silverado 1500 and GMC Sierra 1500 pickups, all from the 2019 model year, over potentially defective electronic stability control and antilock brakes. In that case, GM said the errors would not show up as a diagnostic warning on the instrument cluster. But after GM had done recall work on 162,000 vehicles, about 1,700 owner have complained that their power brakes didnÂ’t work after they had the recall done and then used the OnStar app to start their vehicle. GM then issued a supplemental fix for customers whoÂ’d already had their vehicles serviced. In this case, a diagnostic warning should illuminate saying either “Service Brake Assist” or “Service ECS,” which GM says is a signal that a customer should not drive the vehicle and instead call their dealer, which will tow the vehicle and have it repaired. Safety advocates say the automaker hasnÂ’t gone far enough to protect customers. “The fact that you could potentially start a vehicle and not have brakes is a pretty risky proposition,” Sean Kane, president of the Safety Research and Strategies, which works on auto issues for plaintiffs and governmental organizations, told the Freep. “The fact that they wouldnÂ’t notify owners (sooner) is pretty stunning.” GM told the Freep it was required to notify the National Highway Traffic Safety Administration and file paperwork before it notified customers about the original recall, which was made Dec. 12. It then had to investigate and resolve the problem created by its original recall fix before alerting customers. GMÂ’s call center and dealers are contacting the remaining 900 customers who havenÂ’t yet had the update made to the original recall repair. GM also hired a vendor to send recall letters to the 550,000 customers affected by the original recall notifying them about the update. There are no known injuries or deaths related to the problem. Read the Freep story here.
GM recalls 3,300 pickups and SUVs for new ignition-switch issue [UPDATE]
Mon, Oct 19 2015UPDATE: A statement from GM about the recall has been added below. The exact total of vehicles affected is 3,296, including 3,073 of them in the US. General Motors isn't letting an ignition-switch problem grow into a massive scandal again. The automaker is recalling about 3,300 North American trucks and SUVs. They are: the 2014 Chevrolet Silverado and GMC Sierra and the 2015 Chevy Suburban and Chevy Tahoe, as well as 2015 model heavy-duty pickups, the Detroit News reports, citing an Associated Press story. The issue appears to have been caught fairly quickly. In this case, the keys can get stuck in the "start" position and then slip to "accessory" if bumped. This is because the ignition lock gears have an outer diameter that's larger than the specifications allow. When that happens the engine shuts off, and the driver loses assistance to the steering and brakes. The airbags might also be affected. The vehicles get a new ignition-lock housing to fix the problem. According to the Detroit News, an employee who experienced the problem with the switch discovered the issue, and this person then let officials at the automaker know as part of the Speak Up for Safety program. A total of five reports of the fault were discovered. However, there are no cases of injuries or crashes. The claims to the automaker's resolution program eventually tallied that GM's previous ignition switch problem included 124 deaths and 275 injuries. The company also had to recall millions of vehicles and pay significant fines to the US government. GM Statement General Motors is recalling 3,073 full-size trucks from the 2014 and 2015 model years in the U.S. Some of these vehicles may have an ignition lock actuator gear with an outer diameter that exceeds specifications, which may make turning the ignition key difficult. The ignition key could get stuck in the "start" position. This may be more likely at higher interior ambient temperatures. If the vehicle is driven with the key stuck in the "start" position, and the vehicle experiences a significant jarring event or the vehicle's interior temperature cools, the ignition lock cylinder could move out of the "start" position, rotate past the "run" position, and move into the "accessory" position, leading to loss of power steering assist, power brakes and potentially air bag deployment in certain crashes. Dealers will replace the ignition lock housing.








1970 chevrolet c10 pickup lifted 4x4 look!!!!
Really nice 1965 chevy truck
1972 c10
1978 chevy c-10 step-side gm 350 350hp ram jet injected 700r4 air ride 4-disc ac
1969 chevy truck c-10 short bed fleet side
1970 chevy shortbox stepside c/10