1971 Chevy K-5 Blazer! Fully Restored And Semi Customized!! on 2040-cars

Auto blog

GM recalls 3.8 million vehicles in North America due to braking issue

WASHINGTON — General Motors Co said Wednesday it was recalling 3.46 million U.S. pickup trucks and SUVs to address a vacuum pump issue that could make braking more difficult and that has been linked to 113 accidents and 13 injuries. The recall covers 2014-2018 model year vehicles, including some Cadillac Escalade, Chevrolet Silverado, Chevrolet Tahoe, GMC Sierra, Chevrolet Suburban and GMC Yukon vehicles. In late June, GM recalled 310,000 vehicles in Canada for the same issue. GM did not immediately explain why the Canadian recall occurred more than two months before it called back the vehicles in the United States. The recall was triggered because the amount of vacuum created by the vacuum pump may decrease over time, GM told the National Highway Traffic Safety Administration (NHTSA) in documents posted on Wednesday. The NHTSA opened a preliminary investigation into the issue last November, and said it had reports of nine related crashes and two injuries. It provided GM in July with additional field reports that prompted the automaker to open an investigation. GM said it could affect braking in "rare circumstances." The NHTSA said in a statement the "vehicles may experience brake boost failure, which would require increased brake pedal effort, leading to a hard brake pedal feel, and potentially increased stopping distance." GM said dealers will reprogram the electronic brake control module to improve how the system utilizes the hydraulic brake boost assist function when vacuum assist is depleted. GM said the vacuum assist pump, which is lubricated with engine oil that flows into the pump through a filter screen, can in some cases lose effectiveness over time, as debris such as oil sludge can accumulate on the filter screen. GM told NHTSA that prior model years used a different brake assist system design, and vehicles manufactured after 2018 were not equipped with the affected pump design. Separately, GM said on Wednesday it is recalling 270,000 additional U.S. vehicles in three smaller recalls, including 177,000 2018 Chevrolet Malibu cars with 1.5L turbo engines because an error in the engine control module software may result in the fuel injectors being disabled.

2016 Chevrolet Camaro: Everything we know so far [UPDATE]

UPDATE: We fully expect the floodgates to open as facts and photos leak throughout the day. Watch this space for more information as it breaks, including these leaked photos, and some new powertrain speculation. Chevrolet has made a grand production of teasing the all-new, sixth-generation Camaro. That slow trickle will become a deluge this weekend, when the 2016 model hits the stage on Detroit's Belle Isle as part of an all-day Camaro-palooza. Considering you're likely to hear plenty about the next-gen muscle car in the next couple days, we figured now is the perfect time to sort out all the facts and rumors we've heard about the next-generation coupe that's coming this weekend. Here's everything we know about Camaro Six. What Will It Look Like? Arguably the easiest Camaro question to answer after all the teasers and spy shots, General Motors' design team favored evolving the current car's retro design language while retaining the same basic shape. The long hood will carry on, joined by an even shorter, wing-topped rear deck, giving the 2016 an almost fastback-like look. The greenhouse is still slim, but lateral visibility may improve slightly owing to the larger quarter windows. We can only hope. The rear end looks to have been rounded, while Chevy's own teaser shows off larger, more prominent taillight housings than the simple rectangular lights on today's car. Expect quad-tipped exhausts to be offered on at least one version of the Camaro. Judging by the single teaser of the car's profile, the rear haunches will be larger and more chiseled. The muscular aluminum hood and its accompanying power bulge are more heavily styled than on today's car, although it looks largely similar in terms of size. It sits atop an even slimmer upper grille that's barely big enough for Chevy's Bowtie logo, with most of the visual mass moving to the gaping lower grille. One of the more tantalizing rumors surrounding the new Camaro focuses on its roof. As evidenced in a rather bizarre round of spy photos, it almost looks like Chevy is considering a removable panel, a la Corvette Stingray. T-tops are also a distinct (and more probable, we hope) possibility. The new shape will result in a more aerodynamic car, and Chevy claims the 2016 Camaro spent 350 hours in the wind tunnel. Overall lift has apparently been cut by 30 percent, thanks partially to a new, smooth underbody panel. Chevrolet has been far less forthcoming with information on the new Camaro's cabin.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck