Chevy Bel Air - All Original on 2040-cars

Auto blog

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.

2015 Chevrolet Corvette Z06

"Corvette" has stood for American muscle, American sports car, and American supercar. In many cases, it still stands for America: liberty on the go, LS-powered freedom. There was also a time when it meant really impressive numbers that didn't equate to really impressive handling, and a not-so-nice cabin. The handling issue really turned the road-legal corner when the C5 Z06 was introduced in 2001, and by the time the super-duper ZR1 ended its run in 2010, Corvette had exorcised practically all of its dynamic demons. But when I took a seat in the 2015 Corvette Z06 on the first day of my week-long loan, I espied a few demons still squatting in the interior. When colleague Seyth Miersma drove the Z06, he wrote, "Listen, I'm not going to be the guy that dogs the Corvette for having a cheap-feeling interior, this generation has put those once-legitimate claims to rest." Well, I am going to be that guy, because I don't think those claims have been put to rest. One day Chevy will give us leather that looks and feels like leather, instead of the astonishingly thin hide that is laid directly on top of the instrument panel structure. This material was set off by white stitching, but there were no seams, just a trail of white stitches. In some places it was hard to tell where the leather ended and the plastic began; or it might all have been the same upholstery, I don't know. Five dollars of foam padding would add five thousand dollars of luxury to the cockpit. One day Corvette will have plastics that don't look so plasticky. I know General Motors can do it. And after years of thinking Corvette seats were too wide and flat, this latest Z06 is almost there. The seatbacks were nice, but the exaggerated side bolstering on the seat bottoms was too narrow and sharp. That's a personal preference, though; other drivers with thinner thighs will think differently. My complaint isn't that the interior isn't luxurious, it's that it's not luxurious enough. If Chevrolet was worried about pricing, it could add some kind of profligate package to the options list. Have some ex-Porsche people design it, call it the Teutonic Splendor Package, slap a massive price on it, and count the money. People will buy it, and no one will ever have to say again, "But the interior..." That said, this test car's cabin had every feature I wanted. The gauge cluster was bright, crisp, and readable in every shade of daylight.

GM's labor deal with UAW union on verge of ratification

Nov 15 (Reuters) - General Motors' tentative labor deal with the United Auto Workers (UAW) union closed in on ratification as the votes were counted on Wednesday. Following the approval earlier in the day by more than 60% of union members at the Detroit automaker's large Arlington, Texas, assembly plant, additional votes in favor have the deal close to clinching majority approval. The number of union locals, most of which are smaller, still to report vote totals is not large. After several large assembly plants voted against the deal earlier on Wednesday, some media had reported the deal was heading toward failure. But Arlington's support, followed by strong voting in favor by smaller warehouse and parts facilities, has put the deal on the brink of approval. This would mark the first ratification of a deal, which runs through April 2028, with one of the Detroit Three automakers. Ford and Stellantis voting is still under way, and workers at both companies were favoring ratification by comfortable margins. The UAW's GM vote tracking site currently shows approval of the contract leading by a 54% to 46% margin with almost 32,000 workers having cast votes out of about 46,000 UAW-represented GM workers. The Arlington plant, with about 5,000 UAW members, has the most of any GM plant. Voting officially ends on Thursday at 4 p.m. EST, although most votes will be cast on Wednesday. The UAW went on strike for more than six weeks against the Detroit Three, seeking better wages, working conditions and cost-of-living adjustments. All three companies agreed to tentative agreements about two weeks ago. Workers at other GM assembly plants voted against the deal, including 60% of workers at its Fort Wayne, Indiana, truck plant, 53% at its Wentzville, Missouri, plant, 58% of workers at GM's Lansing Grand River plant and 61% of workers at the Lansing Delta Township plant. Seven of GM's 11 assembly plants rejected the deal. In addition to Arlington, workers at plants in Detroit, Fairfax, Kansas; and Lake Orion, Michigan; approved the agreement. Only nine facilities are still listed without vote totals on the UAW vote tracker, including GM's Lockport, New York, components plant with about 1,200 members. Those voting in favor of the agreement have a lead of almost 2,500 and many of the facilities still to come include workers who stand to receive large pay increases upon ratification.