1955 Chevrolet Bel Air on 2040-cars

Auto blog

EcoCar2 is on the hunt for a better, cleaner Chevy Malibu [w/video]

The students spent three years transforming an ordinary Chevy Malibu into a revolutionary vehicle. Not far from the building where General Motors once invented the Chevy Volt, a dozen or so college students are standing on the blacktop alongside a test track, watching a professional driver push the limits of a plug-in hybrid car they've built that's far more radical. These students, from Colorado State University, have spent the past three years transforming an ordinary Chevy Malibu into a revolutionary vehicle. At first glance, it still looks like a regular sedan. But under the hood, they've installed a hybrid powertrain that contains both hydrogen and electric power sources. Even by the standards of the Department of Energy competition they're participating in, it's an outlier. That's exactly what they had in mind. "We didn't want to come here and tell them how to build a better Volt," said Tom Bradley, faculty adviser for the Colorado State team. "They already know how to do that. We can tell them how to think about these possibilities in a whole new way." After three years of work, it all comes down to this. The Colorado State team was one of 15 that came to GM's Milford Proving Grounds last week for the final stretch of the EcoCar2 competition, which challenges regular college students who have no automotive experience to do nothing less than reinvent the American car. The teams have come from across North America, and include schools like Ohio State and Virginia Tech that have a long history of participating in similar competitions, and schools like the University of Washington and Embry-Riddle Aeronautical University that are here for the first time. After three years of work, it all comes down to this. The teams have operated 24 hours a day for almost two weeks here at the Proving Grounds, running a gamut of tests that include a 310-point safety inspection, emissions and energy-consumption tests and road tests, in which professional GM drivers ensure they're road worthy. The winning team will be announced tonight in Washington D.C. Revolutionary cars, ordinary package While other green-car competitions encourage extreme designs, this one comes with a somewhat constraining twist: Yes, students must improve fuel economy and reduce emissions, but in the end, they still have to have a car that would appeal to mainstream customers. In practical terms, that means they must keep conveniences like air conditioning and trunk space.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: