1955 Chevrolet Bel Air/150/210 on 2040-cars

Auto blog

Fernando Alonso just misses qualifying for Indy 500 on first day

Former Formula One world champion Fernando Alonso will need a clutch run on Sunday to qualify for the Indianapolis 500 on May 26 after he failed to seal a guaranteed spot on Saturday. The Spaniard tried fives times to put his McLaren Racing Chevrolet in the top 30, but wound up one spot short. He can make the 33-car field only through a six-car shootout on Sunday that will determine the race's final three drivers. "We have another chance to be in the race," Alonso, who is seeking to make his second Indy 500 field, told IndyCar TV. The Spaniard twice got inside the top 30 but both times was bumped outside the mark, with JR Hildebrand and Graham Rahal the final two drivers to seal qualifying spots. Britain's Pippa Mann will be the only woman in the race, qualifying 30th in 227.244 mph. Race positions 10-30 were determined during the day-long qualifying with Saturday's nine fastest drivers set to return on Sunday to decide pole. Spencer Pigot, driving the Ed Carpenter Racing Chevrolet, led qualifying with a four-lap average of 230.083 mph. He was followed by 2018 winner Will Power of Australia (230.081) and Simon Pagenaud of France (229.854). The troubles for Alonso, whose top four-lap average was 227.224 mph, were exacerbated by a punctured tire in his first qualifying run. "That didn't help," Alonso told reporters. "But, obviously, our performance has been quite bad all week. Quite poor." The Spaniard crashed his Chevrolet in practice on Wednesday and missed nearly two full days of practice while a backup car was prepared. He returned on Friday. Alonso said he was worried the McLaren team was "not ready for the challenge." "We've been slow. You see Juncos Racing crashing yesterday and being ready at 6 o'clock. That's impressive," he said. "For us, we've been a little bit slow on everything." Alonso is bidding to join Graham Hill as the only drivers to achieve the 'Triple Crown of Motorsport' with an Indy 500 victory. He previously won the Monaco Grand Prix and Le Mans 24 Hours race. He also won two Formula One drivers' titles. (Reporting by Gene Cherry in Raleigh, North Carolina; Editing by Greg Stutchbury)Related Video: Motorsports Chevrolet McLaren IndyCar

2020 Ford Explorer vs 3-row crossover rivals: How they compare on paper

The 2020 Ford Explorer has finally landed, and if history serves as an indicator, it should be bigger than sliced bread. And people sure love themselves some sliced bread. This new Explorer may look familiar on the outside, but beneath the skin is a radically new rear-drive platform related to the Ford Mustang (as opposed to a front-drive platform related to the Ford Taurus and a Volvo from the 1990s). Turbocharged four- and six-cylinder engines now exclusively rest under its hood, which as you'll see below, both better anything its competitors offer. Ah, but if you're curious to know how the new 2020 Explorer compares to its various three-row family crossover rivals, take a look at the chart below where we stack it up against the 2019 Chevrolet Traverse, 2019 Honda Pilot, 2020 Hyundai Palisade, 2019 Subaru Ascent and 2019 Toyota Highlander. There are others of course (Mazda CX-9, Dodge Durango, GMC Acadia, VW Atlas), but we only had so much room on the chart, and these were the newest and/or most likely to be cross-shopped with the new Explorer. Engine specs and towing Although the Traverse's V6 just nips it on horsepower, the 2020 Explorer's base 2.3-liter "EcoBoost" turbocharged four-cylinder engine smokes it on torque. Therefore, "best-in-class" power seems like a fair claim from Ford. That there's also a 365-horsepower turbo V6 available, plus a hybrid and even-more powerful ST model on the way shows that Ford isn't kidding around under the hood. Curb weight also seems competitive for the segment. In terms of drivetrain, the Explorer is the only member of this particular group to come standard with rear-wheel drive (2.3-liter only). The Durango is the only other three-row, non-luxury crossover to do so. This is significant for two reasons: First, you could potentially do a power slide in an Explorer. Second, and more important, those in the Snowbelt will have to opt for all-wheel drive (it comes standard with the 3.0-liter). By contrast, a set of winter tires will probably do the job just fine if you want to save some money and gas by sticking with its rivals' standard front-wheel drive. Well, except for the Subaru Ascent — that's standard with AWD. In terms of towing, the Explorer takes the cake with as much as 5,300 pounds for the four-cylinder and 5,600 pounds for the V6. Everything else tops out at 5,000, though again, the Durango is capable of besting them all thanks to its Hemi V8 engine option.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.