Find or Sell Used Cars, Trucks, and SUVs in USA

!957 Chevrolet 2 Door Sedan on 2040-cars

Year:1957 Mileage:76427
Location:

Bellevue, Texas, United States

Bellevue, Texas, United States
Advertising:
Engine:none
Vehicle Title:Salvage
VIN: 12345678 Year: 1957
Make: Chevrolet
Drive Type: roller
Model: Bel Air/150/210
Mileage: 76,427
Trim: none
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

This is a no reserve auction .I have for sale a 57 2 door post 150. I am selling it as a parts car ,but it could be rebuilt The front clip is the best part of the car. The quarters could both be repaired with patch panels, The rear trunk panel would need to be replaced as with a lot of the floor. The left door looks good, but is rusted away on the bottom inside. Now for the good part. The car still has its front seat, Most of the side chrome is there. The body is pretty darn straight. I have had the hood open and it looks good under it, but it got closed fairly hard and I cant get it open any more. The car rolls and stears, ,but it won't have any brakes. I will help  you load it on your shipper ,but I won't ship it. The car can set here for 90 days after it is paid for if need be. Ask questions before you buy.There is no title . Sold on a bill of sale as a parts car. Sold as is where is.

  I want a $200 dollar nonrefundable deposit  by paypal in 24 hrs. The balance to be paid in 5 days.  Unless  you bring cash at time of pickup your funds will have to clear my bank before I will release the car.  Thanks for looking.

Auto Services in Texas

Zeke`s Inspections Plus ★★★★★

Automobile Parts & Supplies, Battery Storage, Battery Supplies
Address: 1006 S Frazier St, Hufsmith
Phone: (936) 441-3500

Value Import ★★★★★

Used Car Dealers
Address: 1210 N Wayside Dr, Winchester
Phone: (866) 595-6470

USA Car Care ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 202 Cypresswood Dr, Klein
Phone: (281) 355-5800

USA Auto ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 12113 Garland Rd, Rowlett
Phone: (972) 247-4098

Uresti Jesse Camper Sales ★★★★★

Automobile Parts & Supplies, Truck Accessories, Transport Trailers
Address: 13070 Interstate 35 S, Atascosa
Phone: (210) 623-2411

Universal Village Auto Inc ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 6223 Richmond Ave, West-University-Place
Phone: (832) 320-9600

Auto blog

Why the Corvette is Chevrolet's billion-dollar baby

Thu, 28 Feb 2013

Edmunds has worked up a piece that tries to figure out just how much the global Chevrolet Corvette economy is worth, a spitballed guesstimate putting the number at more than $2.5 billion with the proviso that the number is probably low. It starts by taking Corvette's new car sales of 14,132 units last year, which would equate to $714,725,900 (including destination) assuming ever car sold was a base coupe with no options. In the final tally, a little extra padding gets that number up to $750,000,000.
But that's not all. Consider this: Many of the almost 1.4 million Corvettes produced over the model's history are still on the road. There are new parts being produced and aftermarket companies like Mid-America Motorworks deaing business, that single Illinois company doing more than $40 million a year in sales. There are the Corvette events large and small, restorers who do nothing but Corvettes, salvage yards that deal only in used Corvette parts and the Corvette magazines where owners find all this stuff.
And then there are the Corvette-themed tchotchkes, every single one of which provides a tiny contribution to the huge licensing royalties that General Motors collects every year. The article admits there's no way to come to an accurate number, but it just goes to show how valuable one specific model can be to a company.

GM trucks get hybrid versions, but you'll probably never see one

Thu, Feb 25 2016

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.

GM pickup truck plant in Flint to add 1,000 assembly workers

Tue, Feb 5 2019

FLINT, Mich. — General Motors said Tuesday it will add 1,000 workers to build new heavy-duty pickup trucks at its plant in Flint, Michigan, and will give priority to GM workers who were laid off elsewhere. The announcement comes the day after GM said it was starting to hand pink slips to about 4,000 salaried workers in the latest round of a restructuring announced in late November that will ultimately shrink its white-collar workforce in North America by 15 percent out of 54,000. GM has come under fire from U.S. President Donald Trump and Midwestern lawmakers for its plans to stop production at five North American factories and cut up to 15,000 jobs in all. The automaker has said it is trying to find new jobs for 1,500 U.S. hourly workers at the affected plants. Flint's truck plant could be a haven for many of these employees. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday will celebrate the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. Elsewhere in the company on Monday, two people briefed on the cuts in the white-collar salaried workforce said GM is cutting hundreds of jobs at its information technology centers in Texas, Georgia, Arizona and Michigan and more than 1,000 jobs at its Warren, Michigan Tech Center. GM is filing new required mass layoff notices with state agencies and disclosed the cuts to lawmakers. The largest U.S. automaker announced in November it would cut a total of about 15,000 jobs and end production at five North American plants. The cuts include eliminating about 8,000 salaried workers, or about 15 percent. GM cut about 1,500 contract workers in December and said 2,300 salaried workers accepted buyouts, officials said. "These actions are necessary to secure the future of the company, including preserving thousands of jobs in the U.S. and globally. We are taking action now while the overall economy and job market are strong, increasing the ability of impacted employees to continue to advance in their careers, should they choose to do so," GM spokesman Pat Morrissey said, adding the bulk of the cuts should be completed in the next two weeks. Morrissey said GM would provide salaried workers with severance packages and job placement services.