Chevy Avalanche Z71 on 2040-cars

Auto blog

Meet the mother-daughter team that's worked on almost every Chevy Volt

It's Mother's Day, and we're soft enough we love our mothers enough to share a new video from General Motors with you. In it, we meet Monique Watson (left) and Evetta Osbourne, a mother-daughter team that works at the Detroit-Hamtramck Assembly where GM makes the Chevy Volt (along with all of GM's other plug-in hybrids: the Opel Ampera, Holden Volt and Cadillac ELR). The two work side-by-side and have installed the lithium-ion battery pack on almost all of those vehicles - nearly 80,000 of them - since GM started making the pre-production Volts in 2009. In a prepared statement, Watson said that she likes working next to her mom, day in and day out, and they the two are totally in sync when it comes to putting the 400-pound, 16.5-kWh packs into the vehicle undersides. They two can also share stories throughout the day, and Watson said, "The arrangement has absolutely improved our relationship." Osborne started working at Detroit-Hamtramck in 1999, Watson since 2006. If you're driving a Volt today, you probably have them to thank for doing a bit of the work putting your car together. See a short video of them in action below. It's Always Mother's Day for Detroit-Hamtramck Duo Mother, daughter install lithium-ion battery pack in nearly all GM electric vehicles 2014-05-08 DETROIT – For Detroit resident Evetta Osborne, every day is Mother's Day. That's because she literally works side by side with her daughter, Monique Watson, at General Motors' Detroit-Hamtramck assembly plant. They have installed the lithium-ion battery pack on nearly every Chevrolet Volt, Opel Ampera, Holden Volt, and Cadillac ELR since production began. In fact, apart from vacation days and an occasional sick day, the mother-daughter duo has installed almost every battery pack since the Volt was in pre-production in 2009. The ELR launched earlier this year. All told – including Ampera – that's more than 80,000 electric vehicles. "We're a good team and our relationship is secondary when it comes to performing our jobs – but it's great to work alongside my daughter, said Osborne, a mother of five. Because the battery packs weigh more than 400 pounds each, automatic guided vehicles – robotic carts that use sensors to follow a path through the plant – deliver them just as the vehicle body structures glide into position overhead. The carts then lift the T-shaped packs, and Osborne and Watson guide them into the chassis and secure each one with 24 fasteners.

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Chevy's latest Silverado videos assume we're idiots

UPDATE: This article has been revised to reflect that any mention of materials used in a future Chevrolet Silverado is speculation. Can we have a sound, rational debate about the merits of aluminum versus steel? According to Chevrolet's latest marketing videos pitting the Silverado against the Ford F-150, the answer is no. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of course, this will all be a hilarious joke when an aluminum-bodied Silverado comes in 2018. That's an if, as a member of the General Motor public relations team has reminded me that any articles regarding future product are pure speculation. Until then Chevy needs to sell the current Silverado, with its body comprised chiefly of steel, against the Ford F-150's lightweight aluminum panels. Instead of touting the merits of the "most-dependable, longest lasting pickup," the strategy seems to center around negative propaganda towards the 13th element. The tone of all three ads is almost Orwellian: steel good, aluminum bad. Of the three videos, the most fair is Silverado vs. F-150 Repair Costs and Time: Howie Long Head to Head. Basically: aluminum costs more than steel, it's more difficult to repair, and requires special equipment for body shops. In terms of Chevy versus Ford, the blue oval truck costs more and takes longer to repair - an average of $1,755 more and 34 more days in the shop, according to the ad. But why stop there when you can have pitchman Howie Long raising an eyebrow at random facts? When Silverado Chief Engineer Eric Stanczak says of the Ford, "It's manufactured in a way that combines aluminum, rivets, and adhesive in a process that's different than Silverado." Long responds, "Huh. Interesting." At the end of the video, Long says "I'd be interested to know what happens to insurance costs." Note he's not saying anything substantive. If Chevy's legal team could sign off on some facts about insurance rates, it would be in this ad. On our Autoblog Cost to Own calculator, there is no significant difference in projected insurance costs between the two trucks. But at least that ad has facts. The other two videos are pure hype. In Cages: High Stength Steel, real people are asked what they think of aluminum and steel in a room with two cages. Then a bear is released into the room, and the subjects scurry to the safety of the steel cage.