2002 Chevy Astro Awd, 8 Passanger Mini Van, Reliable, Many Options, Inspected on 2040-cars

Auto blog

GM's Ultium EV platform finally shows up in Q3 sales numbers

General Motors has heralded its Ultium battery-electric platform as the future of its passenger car and truck lineup, but for the first two years of its existence, its impact on the marketplace has been virtually nonexistent. Well, that finally changed in the third quarter of 2023, and while the cars based on this architecture don't represent anywhere near the volume of GM's broader combustion portfolio, we're reaching a point where Ultium products are finally in view (and in the hands) of real-world shoppers. At this point, five U.S.-market Ultium models are in production: the GMC Hummer EV, Cadillac Lyriq, Chevrolet Blazer & Silverado EV, and BrightDrop Zevo 600. If you're not familiar with that last one, that's OK; it's a commercial product that you likely won't see on the road for some time. Together, these four combined for 4,257 sales in the third quarter alone — up from 2,663 for the entire first half of the year. While that may not seem like a significant uptick when viewed from altitude, the quarter-to-quarter numbers paint a clearer picture.  Let's toss out the stragglers first. The Chevy Blazer EV, and Silverado EV for example, are barely in production. GM delivered 19 Blazers and 18 Silverados in the third quarter and that's the entirety of their production runs so far. Likewise, GM's BrightDrop Zevo 600 delivery van effectively exists apart from the consumer marketplace, so its contribution of just 35 units can be set aside too. That leaves us the two you've heard of: the GMC Hummer EV and Cadillac Lyriq — models with high sticker prices and long reservation queues.  Through the second quarter (remember, we're talking six months here), GMC sold 49 Hummer EVs. No typo. In the three months that made up the third quarter, GM moved 1,167 of them. Not only is that a dramatic improvement over the first half, but it's more Hummers than GMC sold in the entirety of 2022 (854). Lyriq's improvement was less eye-popping on paper, but after moving just 122 total units in 2022 and 2,013 of them in the first half of 2023, Cadillac managed to up that figure to 3,018 units in the third quarter alone.  GM is betting its short-term EV future on the Ultium platform, so these trends need to continue if that's going to be a profitable wager.

GM announces $7 billion Michigan factory investment, most going to EVs

GM announced a $7 billion investment in Michigan manufacturing, much of which is earmarked for EV production. Four sites are included, but the key elements are a new battery cell plant in Lansing and the conversion of GM's existing Orion Township facility to expand production of the forthcoming Chevrolet Silverado EV and its GMC Sierra sibling.  GM says it is the largest investment announcement in company history and that it will create 4,000 new jobs. It also says 1,000 jobs will be retained. "We are building on the positive consumer response and reservations for our recent EV launches and debuts, including the GMC Hummer EV, Cadillac Lyriq, Chevrolet Equinox EV and Chevrolet Silverado EV," said GM CEO Mary Barra.  GM says the Orion expansion and new battery plant will support an increase in full-size electric truck production capacity to 600,000 units. This is in addition to the Factory ZERO facility in Detroit that will also be constructing the electric Silverado and Sierra.  The Orion Township factory current builds the Chevrolet Bolt EV and EUV, and will continue to do so during the plant's conversion. GM did not indicate what will happen with the Bolts once that conversion is complete or whether all will continue to be built at Orion. They do not use the Ultium vehicle architecture. GM will build other EV models at three other factories that are under construction or being converted. They are located in Spring Hill, Tennessee, Ingersoll, Ontario, and Ramos Arizpe, Mexico. GM says that it will have the ability to produce 1 million electric vehicles by 2025. The Ultium Cells Lansing facility is a $2.6 billion joint investment by GM and LG Energy Solution. GM says it alone will create 1,700 jobs once fully operational by late 2024. It will join two other GM Ultium Cells battery factories currently under construction in the United States, one in Ohio and the other in Tennessee.  Not all of the $7 billion investment will be for EVs. It also announced $510 million of the total will go toward upgrading the Lansing Delta Township Assembly to produce the next-generation Chevrolet Traverse and Buick Enclave. Money will also go to upgrading Lansing Grand River Assembly.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.