2000 Chevrolet Astro Ls Extended Passenger Van 3-door 4.3l on 2040-cars

Auto blog

GM pauses 3.0-liter turbodiesel production due to a supplier shortage

General Motors confirmed it has temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine. It blamed the last-minute pause on a supplier-related shortage. Website TFL Truck first reported the news, and a representative from General Motors quickly confirmed it. The spokesperson explained the issue is due to a "temporary part shortage" and added that production will resume "as soon as possible," meaning the Duramax engine (which is called LM2 internally) is not going away permanently. Additional details are not available, so we don't know if the issue is related to the ongoing chip shortage. Rather than delay deliveries and create a backlog, General Motors is reportedly asking its dealers to encourage buyers who want a turbodiesel engine to instead select either the 5.3-liter V8 or the 6.2-liter V8, depending on the model selected. Both are gasoline-powered units. There's no word yet on when Duramax production will resume. The shortage affects several models, including Chevrolet's Tahoe, Suburban, and Silverado 1500 and GMC's variants of these trucks. Cadillac's Escalade is temporarily diesel-less as well. Heavy Duty variants of the Silverado and the Sierra are not affected because they're powered by a different Duramax engine with eight cylinders. Motorists seeking a full-size SUV powered by an efficient turbodiesel engine are temporarily out of options because the Tahoe/Yukon and the Suburban/Yukon XL had the segment to themselves. The Duramax was surprisingly popular, too: in May 2021, GM Authority reported that the turbodiesel straight-six represented 8% of Suburban sales and 6% of Tahoe sales. Installed in a rear-wheel-drive Tahoe, the engine returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make the body-on-frame behemoth more efficient than the unibody, front-wheel-drive Chevrolet Blazer that's 20 inches shorter and approximately 1,700 pounds lighter. Related video: 2021 Chevrolet Tahoe 3.0L Duramax engine

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.