1985 Cadillac Seville Base Sedan 4-door 4.1l on 2040-cars

Auto blog

Question of the Day: Worst year of the Malaise Era?

The Malaise Era for cars in the United States spanned the 1973 through 1983 model years, and featured such abominations as a Corvette with just 205 horsepower (from the optional engine!) and MGBs with suspensions jacked way up to meet new headlight-height requirements. There were many low points throughout this gloomy period, of course. The horrifyingly low power and fuel-economy numbers for big V8s during the middle years of the Malaise Era make a strong case for 1974 or 1975— the years of Nixon's resignation and the Fall of Saigon, respectively— as the most Malaisey years. But then the GM-pummeling debacles of the Chevy Citation and Cadillac Cimarron could make an early-1980s year the low point. 1979, the year of the ignominious Chrysler bailout? You choose! Related Video:

2020 Cadillac CT6 losing the 3.0-liter TT V6?

In April we learned Cadillac would no longer offer the 2.0-liter four-cylinder on the CT6. The same day we heard the news, the CT6 configurator showed that engine option gone, leaving three engines on the menu. That menu could lose another option come 2020, according to a report in AutoVerdict. The site says it got an order guide for the 2020 CT6, and the 3.0-liter twin-turbo V6 won't make it to the new year. That engine was once the top-tier choice, since eclipsed by the detuned 4.2-liter twin-turbo Blackwing V8 imminently available on the Platinum trim. AutoVerdict also read in the order guide that the horsepower figures haven't been finalized for next year's model. As it stands, the entry-level 3.6-liter six-cylinder makes 335 horsepower and 284 pound-feet of torque, the 3.0-liter twin-turbo V6 produces 404 hp and 400 lb-ft, and the 4.2-liter V8 ginning up 500 hp and 574 lb-ft when it arrives. Retiring the middle option ostensibly puts a big ol' gap in output and pricing between the two models left. Right now $24,200 separates the entry-level Premium Luxury from the Platinum. However, since the present Platinum uses the 3.0-liter, it's safe to guess that the 4.2-liter V8 will cost more, creating a larger gap. The Sport model in between uses the 3.0-liter, too. Perhaps that goes away, or maybe it stays and gets further cosmetic upgrades to give it more edge and a higher price. Another change coming to the 2020 CT6 is its induction into Cadillac's metric-unit torque-based badging system. This, remember, converts pound-foot torque into Newton-meters, then rounds up to the nearest 50. That means the 3.0-liter V6 will wear a 400 badge, the 4.2-liter V8 gets an 800T badge - the T standing for turbo. The year's been full of engine rationalizations at General Motors. Theories about the CT6 dropping the 2.0-liter figured it might have been about making space above the CT5, or guaranteeing supply for other GM models that use the engine, like the Cadillac XT4. The folks at AutoVerdict suspect the 3.0-liter TTV6 could be making the move to the CT5, and to the hot-headed CT4-V we'll be getting a look at come the end of this month. Related Video:

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).