1979 Cadillac Seville Base Sedan 4-door 5.7l on 2040-cars

Auto blog

Cadillac XT4 crossover reveals its lighting

The upcoming Cadillac XT4 compact crossover has once again been spotted, this time with less camouflage and an update to its lighting. Specifically, the little crossover is sporting production lighting front and rear, and it's sure to make the luxury SUV one of the boldest-looking Cadillacs. Part of the reason for this comes from the taillights. As we suspected from the last set of spy shots, the XT4 will have highly distinctive lights that run the full height of the C-pillar. Though it's a similar design to that of the Escalade, it's made more interesting by the significant forward rake of the rear pillar. Not only that, but that pillar is quite thick, too. The look is actually reminiscent of the old CTS wagon. Moving around the side, the reduced camouflage reveals that the doors and quarter panels are fairly conservative and lacking in many creases or bulges. We can make out the edges of what will likely be black plastic fender flares and rocker panel cladding. Finally reaching the front, we see that the headlights are similar to those of many current Cadillacs, including the recently refreshed XTS sedan. The main part of the lamp starts high up and is slightly horizontal like the Escala concept, but they extend over the fenders and a strip of LEDs descends down the front. A previous report noted the XT4 will be built in Kansas on the Chevy Malibu platform. That means it will be a front-drive-based vehicle likely offering both front- and all-wheel-drive. Under the hood will probably be at least one turbocharged four-cylinder engine, with a second, more powerful upgrade option a possibility. We expect to see the fully revealed model to show up by the end of 2018. Related Video: Featured Gallery Cadillac XT4 spy shots View 15 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt4 cadillac xt3

Cadillac is doing a 'second installment' of the CT6-V for $92,790

After being all but certain the Cadillac CT6 would begin pushing American daisies June 1, the brand said "the CT6 was never meant to be fully on the chopping block." The same day we got that news, Cadillac began taking pre-orders for the CT6-V. Limited to 275 units and costing $88,790 after destination, orders came in so quickly that order books closed only hours later. Turns out the phrase "275 pre-order slots" was another slight miscommunication. Cadillac has announced continued production of the CT6-V, this time costing $92,790. In February, Cadillac Society confirmed with the automaker that the 275 figure only applied to pre-orders. It isn't clear how many CT6-Vs will be built in what the brand calls the "second installment," but it is clear that buyers who didn't get in early will pay more. Cars Direct was privy to a letter sent to dealers that said pre-order buyers "were rewarded with a special introductory offer by quickly raising their hand." Those slow on the draw have hopefully used the extra time to fish another $4,000 from their pockets. The elevated price buys the same car that was $88,790 two months ago - nothing has changed but the bottom line. The new MSRP puts more distance between the hot CT6-V and the $89,290 CTS-V. Conversely, the CT6-V with a Blackwing V8 beating 550 horsepower and 627 pound-feet of torque is now just $4,000 less than the coming Platinum V8 trim, which costs $96,790. That Platinum version gets a detuned Blacking putting out 500 hp and 553 lb-ft. The vague phrase "second installment" phrase makes us think Cadillac's not committing to a number so it can cap production at will depending on how this more expensive go-round fares. Still, it's good news for anyone who wanted the sedan new and didn't hit the buzzer quickly enough in January. As if all that weren't surprising enough, GM Authority reported that there's a second-gen CT6 in development. The outlet's sources say the new sedan will move to GM's VSS-R platform, the modular architecture that will replace both the Alpha and Omega platforms. The platform initialism stands for Vehicle Set Strategy - Rear-wheel drive. The car even has a codename: 7ESL, where 7 represents the architecture, E the segment, S the sedan body style, and L the Cadillac brand. Looks like the CT6 will be nothing but surprises this year.

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: