1976 Cadillac Seville, 83k Miles, Blue Cloth Interior on 2040-cars

Auto blog

Cadillac calling in 4,900 CTS-V models for brake issue

General Motors is recalling just over 4,900 first-generation Cadillac CTS-V sedans built between September 6, 2003 and June 11, 2007. The affected vehicles are largely registered in cold weather states where rock salt is used on roads. The salt could corrode the front brake hose's fitting in the brake calipers, which could lead to a brake fluid leak, the National Highway Traffic Safety Administration's bulletin reads. Needless to say, that would make slowing down the Corvette-powered Caddy a challenge. The affected vehicles were registered and/or sold in the following states: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia. GM is set to begin notifying owners of the affected vehicles, who will need to report to dealers to have both front brake hose assemblies replaced. Repairs are, naturally, free of charge. Scroll down for the official NHTSA bulletin. Report Receipt Date: APR 15, 2015 NHTSA Campaign Number: 15V225000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 4,907 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2004-2007 Cadillac CTS-V vehicles manufactured between September 6, 2003, and June 11, 2007, currently registered, or originally sold, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, snow or water containing road salt or other contaminants may corrode the front brake hose fitting at the caliper. CONSEQUENCE: Corrosion may cause the brake system to leak which could lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: GM will notify owners, and dealers will replace both front brake hose assemblies, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15149. Note: This recall is an expansion of recall 10V-105. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Drive like a prince: Join us for a walk through Monaco's car collection

Small, crowded, and a royal pain in the trunk lid to drive into during rush hour, Monaco sounds like an improbable location for a huge car museum. And yet, this tiny city-state has been closely linked to car culture for over a century. It hosts two major racing events every year, many of its residents would qualify for a frequent shopper card if Rolls-Royce issued one, and Prince Rainier III began assembling a collection of cars in the late 1950s. He opened his collection to the public in 1993 and the museum quickly turned into a popular tourist attraction. The collection continued to grow after his death in April 2005; it moved to a new facility located right on Hercules Port in July 2022. Monaco being Monaco, you'd expect to walk into a room full of the latest, shiniest, and most powerful supercars ever to shred a tire. That's not the case: while there is no shortage of high-horsepower machines, the first cars you see after paying ˆ10 (approximately $11) to get in are pre-war models. In that era, the template for the car as we know it in 2023 hadn't been created, so an eclectic assortment of expensive and dauntingly experimental machines roamed whatever roads were available to them. One is the Leyat Helica, which was built in France in 1921 with a 1.2-liter air-cooled flat-twin sourced from the world of aviation. Fittingly, the two-cylinder spun a massive, plane-like propeller. Government vehicles get a special spot in the museum. They range from a Cadillac Series 6700 with an amusing blend of period-correct French-market yellow headlights and massive fins to a 2011 Lexus LS 600h with a custom-made transparent roof panel that was built by Belgian coachbuilder Carat Duchatelet for Prince Albert II's wedding. Here's where it all gets a little weird: you've got a 1952 Austin FX3, a Ghia-bodied 1959 Fiat 500 Jolly, a 1960 BMW Isetta, and a 1971 Lotus Seven. That has to be someone's idea of a perfect four-car garage.  One of the most significant cars in the collection lurks in the far corner of the main hall, which is located a level below the entrance. At first glance, it's a kitted-out Renault 4CV with auxiliary lights, a racing number on the front end, and a period-correct registration number issued in the Bouches-du-Rhone department of France. It doesn't look all that different than the later, unmodified 4CV parked right next to it. Here's what's special about it: this is one of the small handful of Type 1063 models built by Renault for competition.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging