2008 Cadillac Sts 3.6l V6 Auto Low Mileage Loaded Nav Leather Sunroof on 2040-cars

Auto blog

Cadillac gives ATS, CTS new V6 for 2016

Replacing the existing 3.6-liter V6 in the Cadillac ATS and CTS is... another 3.6-liter V6. But this one promises higher output, while consuming less fuel, and making less noise. Like the V8s in the CTS-V and Escalade, it's got cylinder-deactivation technology to cut it down to a four-pot under lighter loads, as well as automatic stop/start, and comes mated to an eight-speed automatic transmission. The new engine produces 335 horsepower and 284 pound-feet of torque. That's a modest improvement over the 321 hp and 275 lb-ft mustered by the unit it replaces. But it also delivers an approximate improvement of nine percent in fuel economy and eight percent in carbon emissions. That's what we'd call a win-win, even if it's a modest one. Of course, those ATS or CTS buyers attracted to higher efficiency will still likely go for the 2.5-liter inline-four or the 2.0-liter turbo four. And those more inclined towards performance will be tempted by the 3.6-liter twin-turbo V6 in the ATS-V or CTS Vsport – or the 6.2-liter supercharged V8 in the CTS-V, for that matter. But those customers looking for the best of both worlds will surely be pleased by the improvements the new atmospheric V6 and 8-speed gearbox bring to the table. Related Video: New Technologies Boost Efficiency for 2016 CYLINDER DEACTIVATION AND START/STOP SYSTEMS BEGIN PRODUCTION ON ATS AND CTS PRODUCT LINES 2015-10-09 Renowned for luxury and design, Cadillac has recently added dynamic driving performance to its list of attributes. Now as 2016 model year production begins, Cadillac adds new fuel-saving technologies. Active Fuel Management and Automatic Stop/Start technologies, and widespread use of a new 8-speed transmission, are combining to raise fuel economy ratings and reduce emissions in Cadillac's portfolio. Cadillac's all-new six cylinder engine contains Active Fuel Management, or cylinder deactivation, technology enabling it to seamlessly switch from six-cylinder to four-cylinder operation under certain light-load conditions, while maintaining excellent performance. The new 3.6-liter engine is part of the 2016 ATS and CTS product lines. Additionally, the Cadillac Escalade luxury SUV's V8 will shift to four-cylinder operation in many daily driving conditions, as will Cadillac's all-new high performance CTS-V sedan.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

Cadillac CT6 hits dealers in March for $54,490

When the Cadillac CT6 hits dealerships in March of 2016, it will carry a starting price of $54,490 (including a $995 destination charge). That strikes us as a reasonable asking price. For some context, the CTS, which sits a rung down the size and pricing ladder at Cadillac, starts at $46,555. A BMW 5 Series sedan begins its pricing journey at a bit over $50,000 while the larger 7 Series commands a bare minimum of $82,000. So, while the Cadillac's range-topping CT6 isn't exactly a 5 Series or 7 Series competitor, its pricing strategy seems to reflect an interesting position in the luxury-car playing field. For that $55,000-ish asking price, the CT6 comes equipped with a 2.0-liter turbocharged four-cylinder engine that pushes 272 horsepower to the rear wheels. When equipped with a 335-horsepower, 3.6-liter V6 engine and all-wheel drive, the CT6 nudges up just slightly to $56,490. Again, that's a reasonable $2,000 surcharge for more power and four driven wheels. Continuing up the CT6 structure brings us to the 400-horsepower, twin-turbo, 3.0-liter V6 for $65,390 that also comes with all-wheel drive. All models come with an eight-speed automatic transmission. At the very top of the pricing scale sits the CT6 Platinum, which carries a MSRP of $84,460. As noted earlier, that puts the tip of Cadillac's CT6 spear just into the starting territory of BMW's biggest luxury sedan. A plug-in hybrid model is promised that will offer 335 horsepower and 432 pound-feet of torque with double the fuel efficiency of a comparable non-hybrid CT6, but Cadillac hasn't yet announced pricing for that model. We're eager to find out exactly where the CT6 lands on the scale of high-end luxury cars in America. One thing is for certain, though: Cadillac is clearly trying pique the interest of German cross-shoppers with its top-level offering. Check out the press release below for more details from the automaker about its so-called Cadillac Touring 6 Sedan. Related Video: 2016 Cadillac CT6 Range-Topping Sedan Slated for March Launch NEW RANGE INCLUDES CT6 STARTING AT $53,495; CT6 PLATINUM PRICED FROM $83,465 2015-11-02 Cadillac extends the top of its range with the 2016 Cadillac Touring 6 sedan, which begins production in Detroit in January, with initial shipments to dealers in March. Through the integration of new technologies, the first-ever Cadillac CT6 creates a new formula for the range-topping sedan and substantially expands the Cadillac portfolio.