2012 Cadillac Srx Black Low Miles Cheap Like New Leather on 2040-cars

Auto blog

Recharge Wrap-up: Cadillac CT6 Plug-In on sale in China, Oregon utilities spur EV adoption

The Cadillac CT6 Plug-In is now available in China. The luxury plug-in hybrid sedan uses a turbocharged 2.0-liter engine plus two electric motors, which give the car a 0-62 mph time of 5.4 seconds. Its liquid-cooled 18.4-kWh lithium-ion battery pack gives the car an all-electric range of 50 miles, with a total range of 581 miles. Cadillac offers a 200V charger with the CT6 Plug-In, which provides a full charge in less than five hours. Owners can check charging status remotely using OnStar or the MyCadillac app. The CT6 Plug-In is offered in two variants, priced at about $80,400 and $94,800. Read more from GM. Two Oregon utilities are launching a program to increase EV adoption. Portland General Electric (PGE) will build six charging locations, each with up to four dual-standard fast chargers. PGE will also build and operate charging sites for electric buses, freeing up money for Portland's TriMet transit agency to spend on the actual buses. Pacific Power will also build public EV chargers, and lower some electricity rates for operators. Both companies will also work to inform the public about the benefits of electric mobility. Oregon utilities are required to stop using coal by 2030, and use 50 percent renewable energy by 2040, which will make EVs even cleaner. Read more at Green Car Reports. Continental says a shift to EVs will cost its company jobs. The automotive parts supplier's CEO, Elmar Degenhart, says that while the company will need to cut production jobs, those will be offset at least in part by the creation of new positions related to electric mobility. "There is enough time to design the process such that the blow is softened and major pain can be avoided," says Degenhart. Some 30,000 jobs at Continental are tied to combustion engines. Read more at Automotive News Europe. Featured Gallery 2017 Cadillac CT6 Plug-in Hybrid View 15 Photos News Source: GM, Green Car Reports, Automotive News EuropeImage Credit: Cadillac Green Hirings/Firings/Layoffs Cadillac GM Green Culture Electric Luxury recharge wrapup

Cadillac confirms 420-hp twin-turbo V6 for 2014 CTS [w/videos]

The 2014 CTS will break cover next week at the New York Auto Show, but Cadillac has released a few details of what we can expect to find under the car's hood. As we saw in some spy shots back in January, the biggest news for the midsize Caddy will be a twin-turbocharged V6 producing a whopping 420 horsepower and 430 pound-feet of torque.
This LF3 engine will be paired to a new eight-speed automatic transmission, which will help balance performance and fuel economy. We still don't know how much the 2014 CTS has grown in terms of size and weight, but General Motors says that new sedan will return 17 miles per gallon in the city and 25 mpg highway with the new engine to go with a 0-60 mile per hour time of 4.6 seconds - that means the new CTS will have the fuel economy close to the current base model sedan and acceleration not too far from the current CTS-V. General Motors also confirmed that this twin-turbo V6 will be available in the 2014 XTS this fall.
The next-generation CTS will carry over the 3.6-liter V6 from the current car (likely as a base engine) and also add the 2.0-liter turbo four-cylinder from the ATS. Check out all the details on this new engine and watch a few videos (including GM's nifty tilt rig) by scrolling below.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.