2011 Cadillac Srx Fwd 4dr Luxury Collection on 2040-cars

Auto blog

Next Cadillac Escalade's interior spied for the first time

Update: Now that new spy photos of another large GM SUV have surfaced, we believe these shots show us a GMC Yukon interior, not a Cadillac Escalade. You can see the new spy shots here that depict a much more upscale vehicle interior compared to the fuzzy center stack shown in the shots of the Yukon. The new Cadillac Escalade has a lot of work to do in order to properly compete with Lincoln's wonderfully luxurious Navigator. These interior spy photos are our first look at what Cadillac is working with on the inside of its new luxury truck. We won't make final judgements, as this vehicle is still a prototype and subject to change. However, a few key bits are noticeable from the fuzzy photos. As expected, Cadillac's CUE infotainment and center stack is nowhere to be seen. Replacing it is a new interior design language, with a tablet-like screen that seems to rise out of the sloped stack on top. Below the screen is a strip of stitched leather and a couple prominently placed air vents. To the left of this area is what appears to be a push-button gear shifting system, replacing the column-mounted shifter currently in use. Below all that on a lower level of the center stack are all the climate controls, along with what look like physical buttons for what could be audio-related controls. Does it look as luxurious as the Lincoln? Not with all the coverings and shrouding it doesn't, which means we'll have to wait until we get the full picture. One thing that's clear is that the interior design is definitely going to be wildly different than the current Escalade. That center stack flows downward as one sloping piece into the high and bulky center console area. This design looks like it brings the center console further downward, and also uses a multi-tiered look. It's tough to read what's on the screen, but the software looks like the same stuff we got a preview of on the new Cadillac CT5 and CT4 sedans. As for the exterior shots, there's almost nothing that we haven't already gotten a taste of in previous spy photos. The independent rear suspension is a go, as are what appear to be massive headlight and LED DRL fixtures. If you look through the wrapping, you can make out how far up and down the lighting fixtures stretch ... or perhaps they're separate units altogether. It's tough to tell at this point.

Cadillac to expand V-Series but discontinue CTS-V and ATS-V

Cadillac said Tuesday it will expand its V-Series performance sub-brand with the arrival of the CT6-V sedan in 2019 ( formerly known as the CT6 V-Sport), with plans to add high-performance variants across its portfolio. The flipside to that expansion is the sunsetting of its two existing V-Series performance cars, the ATS-V (both coupe and convertible) and CTS-V sedan. Two new unspecified sedans will slot below the CT6 in Cadillac's lineup, a spokesman said. The CT6-V will arrive next spring, roughly a year after it bowed at the New York auto show. It will feature Cadillac's new "Blackwing" V8, a twin-turbo engine that displaces 4.2 liters and produces an estimated 550 horsepower and 627 pound-feet of torque, sending it through GM's new 10-speed automatic transmission to drive all four wheels. A less-aggressive version of the engine will also appear in the CT6 Platinum model, offering 500 horsepower and 553 lb-ft of torque. "Beginning with the debut of the CTS-V Sedan in 2004, the V-Series sub-brand sparked new life into Cadillac," Mark Reuss, executive vice president and president of GM Global Automotive Group and Cadillac, said in a statement. "As a result of the overwhelming response the CT6 V-Sport received when revealed in early 2018, we've decided to formally make it a V-Series, signaling the expansion of V-Series." View 61 Photos A Cadillac spokesman tells Autoblog the 2019 model year will be the last for the ATS-V and CTS-V. The ATS-V is powered by a twin-turbo 3.6-liter V6 that's good for 464 hp and 445 lb-ft of torque, an increase of 262 hp and 173 lb-ft from the base, four-cylinder ATS, which is also set to go to pasture at the end of the 2018 model year. The CTS-V, meanwhile, boasts a 6.2-liter supercharged V8 under its carbon-fiber hood that puts out 640 horsepower and 630 pound-feet of torque, good for a 3.7-second 0-60 mph time and a top speed of 200 mph. In a Quick Spin review last year, Autoblog Editor-in-Chief Greg Migliore called the car "old-school muscle in an Esquire-approved suit. It's 'roids and cufflinks." As for what's next for an expanded V-Series, Cadillac has the new XT4 crossover, and already other companies are banking on performance versions of crossovers. Cadillac's also developing a less expensive luxury sports sedan called the CT5. It's also said to be planning a production version of the Escala concept starting in late 2021, so those could be possibilities.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.