2010 Srx 2.8 Turbo!!/leather/awd/4x4/xenons/navi/pano/20's/heated/camera/rebuilt on 2040-cars

Auto blog

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Cadillac won't replace XTS after 2019

Cadillac wouldn't be Cadillac without a large sedan, but the definition of just which model fits that bill changed last week. Before the New York Auto Show, that role fell to the XTS. After the New York Auto Show, though, the focus shifted to the CT6. So what's to become of the XTS now that the CT6 has emerged? According to the latest intel, it'll live out the rest of its lifecycle until around 2019, but then drive off to its own funeral like so many limousines and hearses that were built off its platform. This was learned based on comments made by Cadillac chief Johan de Nysschen at the closed-door unveiling of the CT6 in Manhattan: "Ultimately, a car like XTS when it reaches the end of its lifecycle, will not be replaced." That'll be bad news for the livery business that – in the post-Town Car era – has come to rely on the XTS as the basis for its stretch jobs. "We will not have a car that will lend itself to these kind of modifications and we will probably withdraw from those markets," de Nysschen told GM Inside News. That's not all the new Cadillac boss had to say, though: he also indicated that the replacements for the ATS and CTS will be positioned differently from the current models: "As we move into the future refining our sedan portfolio, there will be no direct successor to the CTS. There will be no direct successor to the ATS. There is no point to renaming those cars because in the future those cars will disappear." Based on Johan's comments and those we've heard until now, we'd expect the replacement for the ATS to move down a size to take on the likes of the Audi A3 and Mercedes CLA, and the CTS' successor to move down half a size class as well to give the new CT6 a bit more breathing room, and possibly an even larger flagship sedan to be positioned above them all. Related Video:

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.