2010 Cadillac Srx Performance V6 Awd Suv Onstar Bose Repairable Rebuilder on 2040-cars

Auto blog

GM recalls 2022 Cadillac XT5, XT6 and GMC Acadia for suspension issue

General Motors is recalling a relatively small number of 2022 Cadillac and GMC crossovers to address the potential for missing or loose rear suspension hardware that is being blamed on a lapse in quality control at the company's Spring Hill facility. The campaign covers 223 examples of the Cadillac XT5, 159 examples of the Cadillac XT6 and 354 examples of the GMC Acadia. "General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2022 model year Cadillac XT5, XT6, and GMC Acadia vehicles," GM said in its defect report. "A fastener in the left-rear suspension toe link in some of these vehicles may not have been fully tightened during suspension assembly. After an assembly process was moved to a new area, error proofing equipment was not initially set up properly, which allowed a window where the operator might miss tightening certain fasteners without the failure being flagged." The issue was discovered by a quality engineer at the Spring Hill facility in March of this year, at which point GM conducted an audit to determine which and how many vehicles may have left the factory with improperly torqued or missing fasteners, narrowing down the recall population to the above 736 vehicles. No incidents associated with the defect have been reported in customer vehicles.  Related video: Recalls Buick Cadillac GM Ownership Safety

2015 Cadillac ATS sedan gets early reveal in making-of video

Cadillac is apparently preparing to roll out a minor facelift for the ATS sedan - which we know not because General Motors has already revealed it or because we're looking at it in a fresh batch of spy shots (though we've seen that too), but because a behind-the-scenes video from the filming of its commercial has leaked out online. Which may be bad news for Cadillac, and even worse news for the film production company, but good news for us, because we get to see it ahead of schedule.
The revised sports sedan seems to be sporting a new front bumper and less egg-cratey grille with Caddy's new wreath-less badge at its center, all apparently put in place to bring the sedan more in line with the new ATS coupe.
We're sure Cadillac will be revealing the updated 2015 ATS sedan shortly, but you can scope it out right now in the video below. By way of comparison, we've included an image gallery of the current ATS, released back in 2013, as well.

Why GM will import the Cadillac CT6 PHEV from China

There's a clear-cut reason that General Motors is going to build its upcoming plug-in hybrid CT6 sedan in China. Sure, the car will be sold in China and the US, but the real reason for the "Made In China" stamp is environmental. If an automaker wants to build a new model in China, adding a green powertrain is an easy way to do that. The CT6 will have both a PHEV option as well as standard gas engine versions. David Leone, Cadillac's executive chief engineer, told AutoblogGreen recently that, "[China is] far more receptive to approving localized production of vehicle programs that have new energy vehicle powertrain applications." To put it succinctly, since the CT6 has a PHEV option, it is easier for GM to build all CT6 models in China. Some of them will then be imported to the US. "Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." "To bring any new car into China, to produce it, you need government approval," Leone said. "The government isn't interested in bringing many new cars to market that don't have new energy credits. [The CT6] also provides new energy credits that enables it to be an attractive, well-received product in China." Leone said that there are two main markets for the various CT6 models: China and the US. The car will arrive in the 2017 model year, so some time after the end of June 2016. There are other practical reasons to build the PHEV in China, like the cells in the battery pack. Those are provided by LG Chem, which makes some cells in Michigan but more in South Korea. And GM already builds cars in China through its joint venture with SAIC, Shanghai General Motors, or SGM. "In February 2013 we started making the XTS, in summer of 2014 we started making the ATS-L," Leone said. "We will be producing [the CT6] within a number of months. Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." The Chinese and US versions of the CT6 will be identical, Leone said. While some Cadillacs sold in China are slightly different than the US versions – the Chinese ATS is 77 millimeters longer, for example – the CTS6 PHEV will be exactly the same in both places, other than slight tweaks to the trim levels. Still, "more of our cars going forward will be the exact same car," he said. That doesn't mean that sales will be the same everywhere.