Cadillac Fleetwood Series 75 Limousine 1969 Pearl White 1150 Made Classic Lqqk on 2040-cars

Auto blog

Cadillac to recall 20,000 SRX models over wheels that could fall off

A potential issue with the lug nuts on 19,871 units of the 2013 Cadillac SRX in the US and Canada has lead to a recall of the luxury crossover. Those lug nuts that have a Teflon topcoat, identified by their bluish tint, could loosen and cause "creaking, rattling or grinding noises or steering vibrations." In the worst case scenario, a wheel could fall off, but there have been no reports of that happening, nor any reports of accidents or injuries due to the issue.
This is the second recall action on the SRX over the last few months. In March, Cadillac recalled 27,000 SRX models over a transmission programming issue. General Motors will begin notifying customers with the potentially faulty parts on June 3, at which time they can take their vehicles to dealers to have the tires rotated and new nuts installed. A further 7,397 SRXs exported from North America also face the recall action.

2019 Autoblog Technology of the Year finalists revealed

Every fall, we line up a range of new models with the latest and most compelling automotive technology from the past year. We test everything from semi-autonomous systems like Tesla's Autopilot to trick suspension setups like the Multimatic spool-valve shocks on the Chevy Colorado ZR2. We spend months paring down the list to a small group of contenders. After testing, dinner and healthy debate, we tally up the votes and name our winner. For Autoblog's 2019 Technology of the Year Award, our three finalists are the Cadillac CT6 with Super Cruise, the Infiniti QX50 with Variable Compression Turbo and the Mercedes-AMG E 53 with EQ Boost. Super Cruise is an advanced SAE Level 2 semi-autonomous system, though Cadillac (unlike some of its rivals) is reluctant to push that point. Cadillac would like you to think of this as an advanced driver assistance feature rather than a semi-autonomous system. Super Cruise allows completely hands-free highway driving. Thanks to a driver-facing camera, the system forces the driver to keep his or her eyes on the road even if hands are off the wheel. Although the CT6 is being discontinued, look for Super Cruise to make its way to other Cadillacs soon. VC Turbo is a little more complicated. Basically, Infiniti's 2.0-liter turbocharged inline-four can vary the compression ratio on the fly. In general, turbocharged engines are more efficient than naturally-aspirated engines when on boost, but can perform worse at low revs. VC Turbo allows for a best-of-both-worlds situation, increasing the compression at low revs and backing it off once the turbo spools up. The best part is that it does so seamlessly, with only a dash readout letting you know what's going on under the hood. Our third finalist is the EQ Boost 48-volt system in the Mercedes-AMG E 53. Like VC Turbo, EQ Boost does a lot just beneath the surface. Mercedes has developed a new turbocharged 3.0-liter inline-six and paired it with a small electric motor. While the car can't run on electricity alone, the motor helps improve both efficiency and performance, smoothing shifts and filling in low-end torque before the turbos spool up. Think torque fill, similar to a McLaren P1. Who can complain about better fuel economy and more torque? Look for the 48-volt system to make its way into most of the Mercedes-Benz lineup. The winner will be revealed next week on Autoblog, and we'll present the award Jan. 15 at the Detroit Auto Show. Related Video:

Why an independent rear suspension for GM's new, full-sized SUVs wasn't easy

A Motor Trend report last month laid out how Cadillac's 4.2-lier twin-turbo Blackwing V8 could be an orphan due to cost concerns in the GM empire. Last-minute chassis changes to Cadillac's new sedans and XT6 crossover led to engine bays that couldn't fit the Blackwing. On the SUV side, according to the report, the new independent rear suspension for big people haulers cost so much to implement that GM ruled out reworking the Escalade to accept the Blackwing. At least one commenter rightly asked how could a suspension swallow that much money. A new piece in Motor Trend has the answer. The excellent Alissa Priddle spoke to Tim Herrick, GM's executive chief engineer for full-size trucks, about why the clean-sheet IRS cost "multimillions of dollars."  First, GM would need to build a new body shop at the Arlington, Texas plant that assembles the automaker's big SUVs to stamp the numerous wholly new parts and panels accommodating an IRS. Then GM would need to design and pay for a new assembly process. On top of those up-front costs, there was the incremental cost of the four-link IRS components being more expensive than those in the trucks' former leaf-sprung solid axles. Herrick endured so many rejections for so long that he remembers the date and time when he got approval for the new unit. He said it came down to a meeting where he told a higher-up, "I'll make you a deal: If we get to the reveal, or if we launch this and you think this was a dumb idea, I'll hand you my badge and let you walk me out." Head to Motor Trend to read the full story. Based on Herrick being on stage to help present the new SUVs to the press, and on our First Ride in the new Chevrolet Tahoe and Suburban at GM's Milford Proving Grounds, it appears this will have a happy ending for all involved. Furthermore, since Herrick worked on the T1 platform that supports the big SUVs as well as the light- and heavy-duty pickups, he understood the demands on the commercial side, too. That could be why when Roadshow asked Tim Asoklis, chief engineer of the Tahoe and Suburban, if the new IRS could endure life in the Chevrolet Silverado and GMC Sierra, Asoklis answered, "Oh, absolutely." Related Video: