1959 Cadillac Series 60 Special Fleetwood - 54k Orig Miles - Orig Ca Car - Wow!! on 2040-cars

Auto blog

Cadillac electric crossover will be revealed in April

Cadillac will unveil a midsize electric crossover in April, brand President Steve Carlisle told dealers at the National Auto Dealer Association (NADA) Convention Monday. The new crossover will be Cadillac's first all-electric vehicle.  The New York Auto Show is April 10-19, with press days April 8-9. It's unclear whether the Cadillac reveal would happen there, or as a standalone event before or after. Per Automotive News, Carlisle told the assembled representatives that Cadillac has big plans for transitioning from an all internal-combustion lineup to one anchored in electric cars.  "We enter this decade as an internal combustion engine brand. We want to position ourselves to exit as a battery-electric brand, so we have to manage both at the same time," he said.  Early last year, Cadillac teased the new midsized crossover, telling us to expect it to come in two- and four-wheel-drive flavors and to be offered as a global model. The last we heard of GM's plans to electrify its luxury brand came in December, when Carlisle laid out an aggressive plan to switch over its entire lineup by 2030.  Just a week later, parent company GM canceled its plans to appear at CES earlier this year because the model it planned to showcase was not ready to be unveiled due to delays introduced by the UAW strike last fall.  Not even two weeks after the tech show concluded, GM introduced of the self-driving Cruise Origin at a private event in San Francisco, prompting speculation that it was the original subject of GM's CES plans. Whether the Cruise Origin or Cadillac's new mystery midsizer was to bow at CES, there's only one left to reveal now.  Cadillac has been keeping news of its future EV offerings largely on the back burner. The brand has been busy effectively re-launching its entire lineup — an effort that will culminate with the rollout of the new Escalade SUV later this year.  In Carlisle's NADA remarks, he indicated that Cadillac dealers will learn more about the company's plans at a meeting in September.    Green Cadillac GM Crossover Concept Cars Electric Future Vehicles Luxury

GM recalls 83,572 SUVs for ignition switch issue

General Motors is recalling 83,572 SUVs from the 2011 and 2012 model years over a potential ignition lock actuator issue. In affected vehicles, the actuator isn't the right size, which could cause the ignition to get stuck in the "Start" position, and then either due to a jarring event or a "cool interior temperature" the ignition could switch back to the "Accessory" position. Doing so would cause a loss of power assistance and the airbags might not deploy. This is a different ignition issue than the one that's been ongoing for the past year. GM said it expects that less than 500 vehicles suffer from the problem, but that the pool could include vehicles from 2007 through to 2014 that have already been fixed, but with defective parts. The 2011-2012 SUVs included in the National Highway Traffic Safety Administration notice: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. GM will notify owners and dealers will inspect the ignition lock housing to see if it needs a free replacement. RECALL Subject : Ignition Lock Actuator may Bind Report Receipt Date: DEC 30, 2014 NHTSA Campaign Number: 14V827000 Component(s): ELECTRICAL SYSTEM Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2011-2012 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado HD, Silverado LD, Suburban, Tahoe, GMC Sierra LD, Sierra HD, Yukon, and Yukon XL vehicles. In the affected vehicles, the ignition lock actuator may bind, making turning the key difficult or causing the ignition to get stuck in the "Start" position. CONSEQUENCE: If stuck in the "Start" position, the ignition may suddenly snap back into the "Accessory" position, causing a loss of engine, steering, and braking power, increasing the risk of a vehicle crash. If the vehicle is in a crash, the air bags may not deploy, increasing the risk of occupant injury. REMEDY: GM will notify owners, and dealers will inspect and replace the ignition lock housing, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact GM customer service at 1-800-458-8006 (Cadillac), 1-800-222-1020 (Chevrolet), or 1-800-462-8782 (GMC). GM's number for this recall is 14696 for the original equipment, and 14912 for the service replacement parts.

Cadillac CT6 uses aluminum to save 200 pounds

In Cadillac's recently launched ad campaign, the luxury brand's tagline is "Dare Greatly," and the two words suggest a brand willing to take big swings, even if they don't always connect. From what the company is promising, the forthcoming CT6 seems like an embodiment of that new motto. With an eventual range of turbocharged engines, reportedly including a turbo V8, a possible plug-in hybrid and streaming rearview mirror, the sedan is certainly pitched as tech showcase. Of course, extensive use of aluminum is practically mandatory to play in the luxury field these days, and Caddy is proving its latest creation can do that too. Despite the weighty appearance of the sedan's squared-off exterior, 64 percent of the CT6 is aluminum, including the entire exterior. Caddy claims that using so much of the lightweight metal sheds 198 pounds off the scales compared to using conventional steel. There still is some steel in the CT6; although it's predominately the high-strength variety. The engineers use the heavier metal for portions around the cabin and B-pillar for added safety. Cadillac also claims using steel "close-out panels" on lower portions of the sedan make the cabin quieter without needing as much sound deadening. The buildup to the CT6's public unveiling has been a long time coming after Cadillac pinned the flagship (for now) sedan's debut at the New York Auto Show nearly a year ago. When the sheet finally comes off on March 31, we get the first good idea about just how great Caddy's latest act of daring really is. Cadillac CT6 Elevates the Science of Mass Efficiency 2015-03-13 Technology DETROIT – Cadillac will use an advanced mixed-material approach for the lightweight body structure of the upcoming CT6 range-topping sedan. The structure is aluminum intensive, but the new Cadillac also includes 13 different materials customized for each area of the car to simultaneously advance driving dynamics, fuel economy and cabin quietness. The CT6 will debut March 31 at the New York International Auto Show and go into production late this year at General Motors' Detroit-Hamtramck assembly plant. "This is the rocket science of automobile construction and manufacturing today," said Cadillac President Johan de Nysschen.