1957 Cadillac Fleetwood on 2040-cars

Auto blog

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.

Cadillac logo losing its wreath?

The easily recognizable Cadillac logo dates back to the company's founding in the early 1900s, but over the last 110 years, there has been an on-again, off-again love affair with the wreath surrounding the crest. Cadillac's current badge design has used the wreath since the 1980s, but Automotive News is reporting that GM's luxury division is planning to ditch the laurel wreath for a cleaner-looking logo.
The new logo could make its debut as early as next month on a new concept car that will be revealed at the Pebble Beach Concours d'Elegance, although the report also says that it might be until 2015 before it makes its way to a production car. Even then, it doesn't like anything has been finalized yet, as the article also says that plans could still change.
As Cadillac looks to improve its global presence as a luxury automaker, the report says that a simpler logo could make it easier for designers to incorporate the badge onto the car - either in the grille or above the grille (possibly in a fashion similar to Mercedes-Benz). Head on over to the AN article, which shows the Cadillac logo dating back to its earliest design.

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles