2009 Cadillac Escalade 7pass Nav Rear Cam 22's Only 40k Texas Direct Auto on 2040-cars

Auto blog

2018 Cadillac XT7 three-row crossover spied [UPDATE]

UPDATE: Upon further consideration, and after speaking to some industry insiders, it appears this might not actually be a new Cadillac, but instead just a mule of the new Chevy Traverse. One source points out that the foglights are fixed, round units, which would be production spec and would not suggest Cadillac. Another source says the Cadillac version of the Traverse/Acadia/Enclave was cancelled, and development has stopped. Yes, a Cadillac of this size is expected to arrive – and elements of this prototype sure do look Cadillac to us – but it might be too early for this to be it. Cadillac is expanding its portfolio with a three-row crossover. This is it. Expected to be called the XT7, the new vehicle will give Cadillac an entry above the XT5 and below the hulking Escalade. Though the XT7 is heavily covered, we can see Cadillac's (?) bold grille and what looks like strong proportions. It'll probably look like a larger XT5, and you can sort of (maybe) see a similar roofline if you squint. Spy shooters caught it testing with the new Chevy Traverse and Buick Enclave, and they're all expected to use the new General Motors 3.6-liter V6 engine, like the recently revealed GMC Acadia. The XT7 could show up as soon as late this year or early in 2017. Its part of GM's push to capitalize on the red-hot crossover segment that has been fueled by low gas prices and Americans' thirst for utility. The XT7 would likely represent GM's most profitable play in this segment. Simply affixing the Cadillac badge on the front adds thousands of dollars to the sticker compared to a Chevy or Buick product. The XT7 will also give Cadillac a significant opportunity for growth – and perhaps allow it to gain on Mercedes and BMW on the sales charts. While the CTS and ATS have had mixed success, Americans have continued to show a willingness to buy Cadillac utility vehicles. The XT7 is the latest in Cadillac's product blitz following the XT5 and the CT6 range-topping sedan. Those two are the most critical Caddys, but the XT7 isn't far off. Related Video: Featured Gallery 2018 Cadillac XT7 View 11 Photos Image Credit: Brian Williams / SpiedBilde Spy Photos Cadillac SUV

New V6 engines are only the start at Cadillac

Cadillac debuted its new family of V6 engines Friday, but that's not all General Motors' luxury brand has in store for the coming years. The six-cylinder powerplants will certainly help Cadillac in the near term, but they're just two of the many parts of the company's future strategy. GM has invested $12 billion in Cadillac to help the brand grow over the next five years, and the company will launch eight new products between now and 2020. That all starts with the launch of the CT6 flagship later this year – a fullsize luxury sedan we'll see for the first time in New York on March 31. The CT6 will introduce several new features and technologies to the Cadillac range, and with its launch also begins the slow restructuring of Cadillac's model-naming system. The new nomenclature means CT and XT badges for cars and utilities, respectively. Cadillac says that of the eight new vehicles it plans to launch by 2020, five of them will be first-time offerings in market segments where the brand currently does not play. But it's not just about new products – new powertrains are an important part of the Cadillac story, too. After the new V6 engines – a naturally aspirated 3.6-liter and a twin-turbocharged 3.0-liter engine – launch later this year in the 2016 ATS, CTS and CT6, the company says it has a strategy for V8 power – possibly a twin-turbo application – as well as future electrification. Cadillac also says it's working on adding four- and six-cylinder diesel powertrains, though it's unclear which vehicles will make use of those engines. This new six-cylinder engine family is indeed important, with Cadillac's chief engineer, David Leone, calling it the "most advanced V6 in the industry." With 335 horsepower, the 3.6-liter engine is the highest output, naturally aspirated V6 powerplant Cadillac has done – and that's SAE-certified, and on regular fuel. Beyond that, the 3.0-liter mill (pictured at right) marks the first application of GM's active fuel management system on a twin-turbocharged engine. This means that when full power isn't necessary, the TTV6 can run as a 2.0-liter V4 in order to save fuel. New transmissions are also part of the V6 engine story. GM's all-new eight-speed Hydra-Matic 8L45 gearbox will be paired to the 3.6-liter V6, and the 3.0-liter TTV6 will use the company's existing 8L90 transmission that is already found in the Chevrolet Silverado and GMC Sierra pickups (with the 6.2-liter engine).

2019 Cadillac CT6-V preorders start at $89,785

Cadillac's top-of-range sedan will start at less than $90,000, just barely. At the North American International Auto Show in Detroit, Cadillac announced it is opening preorders for the 2019 CT6-V, which will start at $89,785. Keeping things exclusive, Cadillac has 275 preorder slots available to the U.S. market for the CT6-V. It will briefly join the ATS-V and the CTS-V to give Caddy a trio of powerful sedans before the ATS-V and CTS-V bow out after the 2019 model year to make way for new models. Cadillac offers less powerful V-Sport variants, as well. The CT6-V, formerly the CT6 V-Sport, uses a Cadillac-exclusive powertrain. The twin-turbo 4.2-liter V8 makes a claimed 550 horsepower and 627 lb-ft of torque. This engine is hand-built and nicknamed the "Blackwing." It is linked to a 10-speed automatic transmission, which puts power to the ground through Cadillac's all-wheel-drive system. As an added luxury perk to buying the CT6-V, Cadillac will include 2 days at the V-Performance Academy at Spring Mountain. The trip is essentially all expenses paid, with tuition and luxury accommodation part of the package. Cadillac estimates the first CT6-V models to arrive in mid-2019. Now, it was widely reported that the Detroit-Hamtramck production facility that builds the CT6 would be among those closed by GM. Cadillac President Steve Carlisle told Automotive News, however, that the company is exploring production alternatives to keep the flagship luxury sedan for sale in the United States. Apparently, it was never actually on the chopping block, and instead, officials at the time of the plant closure announcement failed to mention that CT6 production would be moved rather than cancelled. Where that new facility would be has yet to be announced, but Carlisle told Automotive News that moving production to China, where the CT6 Plug-In Hybrid is built, is "the least-preferred option." Related Video: