2002 Cadillac Escalade Ext Custom on 2040-cars

Auto blog

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.

2020 Cadillac CT5 debuts at N.Y. Auto Show as a proper sport sedan

The 2019 Cadillac CT5 is here, and it's not a tweener sedan. After having done battle with the luxury sedan world through cars that were either too large or too small, Cadillac is using the CT5 to take direct aim at the BMW 3 Series, Audi A4, Alfa Romeo Giulia and Mercedes C-Class. Specifically, the CT5 replaces the CTS, but takes on vehicles one class smaller than what the CTS did. So, let's take a look at what Cadillac is bringing to the table. To begin, GM knows it has a winner on its hands with the Alpha platform used on the CTS and ATS and the Camaro, so engineers adapted it to the CT5. This seems like a great start, because we all happen to love the driving dynamics from vehicles on this chassis. The wheelbase is a couple inches longer than the CTS, but the CT5 is a couple inches shorter in overall length. As a result, the wheels get pushed toward the corners of the car, leaving the CT5 with relatively short overhangs in the front and rear. It looks different than both of the to-be-discontinued Cadillac sedans, but we wouldn't call it revolutionary. The rear end isn't quite a "sportback," but it's a "faster" shape, eschewing a traditional sedan's long decklid for a sloping-roof look instead. This shape does come at the expense of rear seat headroom, but we'll dive into the interior later. We got a little preview of the powertrain setup before this official reveal, but details were scarce. The base engine is the recently new 2.0-liter turbo four-cylinder found in the Cadillac XT4. Just as it did in that vehicle, this engine makes 237 horsepower and 258 pound-feet of torque. While it might be down on power compared to the old 2.0-liter in the ATS (272 horsepower and 295 pound-feet) we found it to be incredibly smooth, refined and not lacking in thrust compared to the old unit. We're sure the four-pot will offer sufficient power for the CT5, but the 3.0-liter twin-turbo V6 is lying in wait. This engine makes 335 horsepower and 400 pound-feet of torque. Both engines are paired to a 10-speed automatic transmission and can be had in rear-wheel drive or all-wheel drive in every configuration. So yes, you can get the V6 with rear-wheel drive, thankfully. Cylinder deactivation is also equipped to both these power units — the four-banger is able to run on two cylinders, while the V6 drops to four. Cadillac was entirely transparent about its new pumped-in engine sound strategy, too.

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.