2002 Cadillac Escalade Custom Upgrades, Extremely Low Mileage on 2040-cars

Auto blog

GM recalls select Tahoes, Yukons, Escalades for rear driveshaft issue

GM is recalling a number of its full-size SUVs due to an issue with the rear driveshaft assembly that could ultimately result in driveshaft failure. The actual number of total vehicles involved in the recall is small at just 1,789, but it’s spread out across the entire 2021 model year full-size GM vehicle lineup. That means a small number of every model is being recalled, including the Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL and the Cadillac Escalade and Escalade ESV. GM traced the issue back to certain driveshaft assemblies with ball bearings that were not properly heat treated. If theyÂ’re not properly heat treated, GM says that the balls may deform over time, causing noise and vibration. Continue to drive in this condition, and GM says the affected joint in the driveshaft assembly could seize, causing loss of drive power. However, the problem wonÂ’t present itself all at once, as GM says there will be a gradual increase of noises and vibrations before total failure. For those few owners with affected vehicles, GM says that it will replace the left and right rear driveshaft assemblies with properly-built units. Per usual with recalls, this will be done at your local dealership at no cost to the owner. If you have one of the recalled SUVs, expect to be notified mid-March. Related video:

Why GM will import the Cadillac CT6 PHEV from China

There's a clear-cut reason that General Motors is going to build its upcoming plug-in hybrid CT6 sedan in China. Sure, the car will be sold in China and the US, but the real reason for the "Made In China" stamp is environmental. If an automaker wants to build a new model in China, adding a green powertrain is an easy way to do that. The CT6 will have both a PHEV option as well as standard gas engine versions. David Leone, Cadillac's executive chief engineer, told AutoblogGreen recently that, "[China is] far more receptive to approving localized production of vehicle programs that have new energy vehicle powertrain applications." To put it succinctly, since the CT6 has a PHEV option, it is easier for GM to build all CT6 models in China. Some of them will then be imported to the US. "Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." "To bring any new car into China, to produce it, you need government approval," Leone said. "The government isn't interested in bringing many new cars to market that don't have new energy credits. [The CT6] also provides new energy credits that enables it to be an attractive, well-received product in China." Leone said that there are two main markets for the various CT6 models: China and the US. The car will arrive in the 2017 model year, so some time after the end of June 2016. There are other practical reasons to build the PHEV in China, like the cells in the battery pack. Those are provided by LG Chem, which makes some cells in Michigan but more in South Korea. And GM already builds cars in China through its joint venture with SAIC, Shanghai General Motors, or SGM. "In February 2013 we started making the XTS, in summer of 2014 we started making the ATS-L," Leone said. "We will be producing [the CT6] within a number of months. Most new global Cadillacs will also be produced in China as well. It's our second-largest market in the world." The Chinese and US versions of the CT6 will be identical, Leone said. While some Cadillacs sold in China are slightly different than the US versions – the Chinese ATS is 77 millimeters longer, for example – the CTS6 PHEV will be exactly the same in both places, other than slight tweaks to the trim levels. Still, "more of our cars going forward will be the exact same car," he said. That doesn't mean that sales will be the same everywhere.

Chinese-made Cadillac CT6 Plug-In starts US sales

General Motors has started US sales of the Cadillac CT6 Plug-In after taking its first domestic deliveries of the China-produced sedan last month. The model is GM's first new plug-in hybrid in the US since the automaker discontinued sales of the ELR extended-range plug-in last year. The arrival and sales, first reported by InsideEVs, were confirmed by Cadillac spokesman Andrew Lipman. Not surprisingly, the sedan isn't cheap, as the CT6 Plug-In is priced at $75,095, or almost $12,000 more than the gas-powered variant, though that figure doesn't include federal and state tax credits for electric vehicles. For that tab, buyers get a 335-horsepower luxury car that can go 31 miles on electricity alone, and 0-60 miles per hour in a little over 5 seconds. The model gives GM three plug-in vehicles to sell to the American public, or the same number US competitor Ford offers. InsideEVs estimates that about 100 of the sedans have been delivered to US dealers, so the car remains a relatively low-volume affair. By comparison, GM's Chevrolet division has sold 5,563 Volt extended-range plug-ins and 3,092 Bolt electric vehicles through March. Cadillac sold 534 units of the ELR in 2016 after moving 1,024 the previous year. GM opted to produce the plug-in hybrid in China because of that country's receptiveness to new models that feature alternative and environmentally friendlier powertrains. Additionally, such production shortens the distance to the CT6's battery maker LG Chem, which is producing the car's battery packs in South Korea. On that note, GM has previously estimated that the Cadillac CT6 Plug-In will move more units in China than in the US. Related Video: