2002 Cadillac Escalade 100k Miles Custom Lifted Monster Loaded New Tires Clean on 2040-cars

Auto blog

GM recalling 524k vehicles over hood latches and toe link nuts

Just hours after confirming to Autoblog its intention to recall 97,540 vehicles in the US (117,651 in North America) for a possible manufacturing defect in the chassis control module of several models, General Motors is issuing two more campaigns that affect another 379,401 units in the US (524,384 in North America).
One campaign covers 290,107 US examples of the 2010-2015 Cadillac SRX and the 2011-2012 Saab 9-4X because the "rear toe link adjuster lock nuts" may be improperly torqued. If not up to spec, the toe adjuster link could separate and allow the wheel to shift while driving, making the handling unstable. GM says that it knows of three crashes and two injuries as a result of this problem. Dealers are inspecting the nuts and installing a new link assembly, if necessary. Autoblog first reported about this potential issue when it showed up on a list of recalls from Transport Canada.
The second recall is for 89,294 examples of the 2013-2015 Chevrolet Spark in the US manufactured from January 17, 2012, through July 29, 2014. According to GM, "corrosion can cause the secondary hood latch striker to stick in the open position." If this happens, and the primary latch also isn't engaged for some reason, the hood could fly open while driving. About 13,000 of these affected Sparks are at dealers and are being held until repaired. The fix requires replacing the hood striker. GM isn't aware of crashes, injuries or fatalities caused by this problem.

2021 Cadillac Escalade vs. 2020 Lincoln Navigator | How they compare on paper

The 2021 Cadillac Escalade arrived late last night, and we all know what that means: It’s comparison time. Specifically, weÂ’re pitting the new Escalade versus the 2020 Lincoln Navigator. The sales gap between the long-time competitors has grown dangerously close for Cadillac ever since the revolutionary new Navigator came out for the 2018 model year. In 2019, the Navigator was only about 4,000 units down from the Escalade. Cadillac intends to widen that gap back up with a new truck, and now itÂ’s time to see if itÂ’s brought the right goods to the party. With the redesigned model that now features an independent rear suspension, these two are more alike than theyÂ’ve been in a long time. The Escalade was stuck with the less space-efficient solid rear end up until now, as GM hadnÂ’t yet made the switch to IRS that Ford long-ago did. Now that it has, these two are super similar from a dimensions perspective. Cadillac was playing catch-up in this fight, so it knew exactly where it needed to aim to come out victorious in a specs battle such as this one. A quick note on the chart below. Both of these models have a “regular” and “long” version. The EscaladeÂ’s long variant is still named ESV, and the NavigatorÂ’s long version is simply named L. In the dimensions section, we distinguish between the two with a “/” — the “regular” length version is on the left, and the “long” version is on the right side of the slash. The numbers are below: Powertrain The Lincoln Navigator still reigns supreme when it comes to power, as the 3.5-liter twin-turbo V6 is high on both horsepower and torque. GMÂ’s small-block V8 comes close, but ultimately falls short by 30 horsepower and 50 pound-feet of torque to the twin-turbo V6. Cadillac does have an ace up its sleeve, though. It comes in the form of the 3.0-liter turbo-diesel inline-six engine. Lincoln hasnÂ’t dropped the PowerStroke diesel into the Navigator (and we'd be shocked if it does), so Cadillac has a unique offering in this segment now. The diesel will be optional on the Escalade, but it has less horsepower and the same amount of torque as the V8. We expect the big advantage for the diesel will come in fuel economy, an area where the Silverado Duramax diesel currently outpaces the full-size truck competition. Both of these big SUVs come standard with 10-speed automatic transmissions. Intriguingly, itÂ’s the 10-speed automatic that was co-developed between Ford and GM.

2020 Cadillac CT5 in New York: 7 questions with the chief engineer

Cadillac revealed the 2020 CT5 at the New York Auto Show, and we decided to sit down and have a chat with chief engineer Mike Bride to learn more about the car. You can read our reveal post here to get the full download, and then read on below to learn a bit more. Cadillac is still rather coy about any performance model to spawn from the CT5, but things appear to be looking up after our conversation that you can read below. Q: What's the driving nature of this car? Should we expect something similar to the CTS and ATS? A: Yes, you can see it's built off the rear-wheel-drive architecture. Our goal was to retain all of that fun-to-drive nature. Direct steering feel, responsive handling. Going forward, we ask how we can continuously improve, and that was really about driving more sophistication in the ride, a much more mannered car that's better for impact harshness and rolling isolation, really provides comfort when you want comfort over tire strips and heaves in the road. Really getting that level of isolation, but not compromising that handling and direct steering feel of the Cadillac sedans we've grown accustomed to. Q: How is this car different from the CTS underneath, and other Alpha platform cars? A: I would say this is a major revision. A lot of new parts, a lot of new part numbers, a significant evolution. In the suspension space, the links are all new, and there's been a lot of work done in isolation, so the bushings and strut mounts are all new. We've evolved the Alpha platform to now get the ride control and road isolation, the comfort aspects of it all. There are a lot of structural improvements like a changed wheelbase, an evolution in rear foot-swing and foot space from the fuel tank area to get in and out of the car better. As we developed this structure, it was about overall structural body stiffness, and impedance at the chassis attachments to really get that level of isolation from road inputs. We try to have a calm floor, a steering wheel that doesn't vibrate, and quiet to the driver's ear. Those were the paths we went after to really drive the structure to the right stiffness requirements, structural integrity, a lot of development into suspension bushings, tuning elements, strut mounts. We have a new damper technology, a ZF damper. It has MVS damper technology. It's a multi-valve system that provides less harshness from an NVH standpoint and a great optimization balance of motion control with ride inputs.