08 Escalade Awd Ultra Luxury Edition Nav Cam Phone Dvds Roof 22s Loaded Pristine on 2040-cars

Auto blog

Cadillac CT5 vs. BMW 3 Series | How they compare on paper

Cadillac just introduced the CT5 sedan at the 2019 New York Auto Show, and it's set to replace both the larger CTS and smaller ATS in the brand's lineup. We have all the details and features for you, in addition to a deep dive with the car's chief engineer, but now it's time to see how it stacks up to the long-time standard bearer in this class: the BMW 3 Series. Now, the car is a bit larger than the completely new 2019 3 Series, but Cadillac says the 3 and the rest of the compact luxury sedan class is its target for this car. We'll dive further into this little conundrum later. This comparison will look at how these vehicles measure up on paper, as we haven't driven the CT5 yet. That will come later, but we're expecting it to be a proper sport sedan competitor with the 3 Series, since Cadillac is building it off GM's dynamically superb Alpha platform. Now let's get on with the comparison. Powertrains and performance Both of these sedans come standard with 2.0-liter turbocharged four-cylinder engines. The BMW four-pot is a bit more potent, coming in with 18 more horsepower and 37 pound-feet of torque more than the Cadillac. Here's our driving review of the BMW. The only upgrade engine for both available initially are turbocharged six-cylinders. BMW offers up its revised inline-six, while Cadillac offers a V6. These six-cylinders are both 3.0 liters. Cadillac bests the BMW in brute torque by 31 pound-feet, but BMW takes the horsepower prize, making 47 more ponies. It's hard to say which car will actually be faster to 60 mph — they'll probably end up being about the same once official numbers are out. This segment used to be one guaranteed to offer a manual transmission, but that's not the case anymore. Neither Cadillac nor BMW will offer a manual to start, but expect to see the stick shift return to higher performance models of each car. For now, they both get torque-converter-style automatic transmissions. One dimension that isn't going away from either anytime soon is rear-wheel drive. Both cars offer rear-wheel and all-wheel drive in every spec available. Fuel economy for the 3 Series is impressive at 30 mpg combined with the four-cylinder. We'll have to wait and see if Cadillac can challenge that figure with its less powerful engine. Size and practicality Here's where a lot of the confusion about the Cadillac CT5 sets in. The CT5 is a tad larger than the 3 Series in its exterior dimensions, but the interior specs are nearly identical.

GM reports third straight sales drop in China in 2020

BEIJING — General Motors' vehicle sales in China fell 6.2% in 2020, as the U.S. automaker suffered a prolonged slowdown in the world's biggest auto market. GM, China's second biggest foreign automaker, delivered 2.9 million vehicles in the country last year, the company said on Wednesday, for a third straight decline in annual sales. But sales have been recovering in the second half of last year, up 12% between July and September and 14% in the final three months. GM has a Shanghai-based joint venture with SAIC Motor, in which the Buick, Chevrolet and Cadillac vehicle brands are made. It also has another Liuzhou-based venture, with SAIC and Guangxi Automobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of its Buick brand grew 4% on the year and Wuling rose 9%, the statement said. Luxury brand Cadillac's sales increased 8%. Sales of GM's more affordable Baojun brand dropped 33% last year, while sales of its mass-market Chevrolet tumbled 30%. GM's delivery of 2.9 million vehicles in China follows 3.09 million vehicles in 2019, 3.65 million vehicles in 2018, and 4.04 million in 2017, for a three-year decrease of 28%.

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.