Full Size Luxury And Power With Leather And All The Options With Only 20k Miles on 2040-cars

Auto blog

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.

Cadillac president de Nysschen says electrification coming 'across the spectrum'

We like to pick on new Cadillac president Johan de Nysschen for his insistence, many years ago, when he was president of Audi of America, that plug-in vehicles are for idiots. Listening to him give the keynote address at the Washington Auto Show today, you wouldn't know he ever said anything negative about an electric vehicle. Instead, he sounds something like a EV-angelist. De Nysschen said that Cadillac will be able to benefit from GM's considerable expertise in plug-in technology, which he said would be "applied across the spectrum of our portfolio." GM's electric committment will help in "making electrification commonplace." With the plug-in ELR already on the road, de Nysschen said that the company's next step in advancing powertrains will be the introduction of stop/start technology – which de Nysschen called an "important system to reduce fuel consumption and CO2 emissions" – into a Cadillac for the first time later this year. Without giving any specific details, de Nysschen said that Cadillac will introduce eight new models (not necessarily plug-ins) by the end of this decade, including five that "will take Cadillac into market segments where the brand is not even present today." These new vehicles will likely be much lighter than today's vehicles, de Nysschen said, because "weight reduction today is critical to automotive design, it helps to improve fuel efficiency and contributes to desireable vehicle dynamics." The key is to reduce weight without compromising safety or comfort and to use the right material – steel, aluminum, carbon fiber – in the right place at the right time. It was a not-so-subtle jab at Ford and its new aluminum F-150. "In the pursuit of weight reduction, some manufacturers have also opted for abandoning steel and have gone for an all-aluminum approach," he said. "At Cadillac, we believe that different materials each present particular advantages in specific applications. There is no single material that represents the optimum balance of the conflicting objectives of every single application." Related video:

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.