2001 Cadillac Eldorado Esc Coupe 2-door 4.6l on 2040-cars

Auto blog

Cadillac introducing V2V communications on 2017 CTS sedans

While Audi has introduced vehicle-to-infrastructure technology in select cars in select cities, Cadillac is focusing on vehicle-to-vehicle (V2V) communications, and it all starts with the CTS sedan. Starting this month, the company will be adding V2V equipment to 2017 models. The feature will be standard on cars in the US and Canada. These V2V devices will allow these new Cadillacs to communicate with each other up to 980 feet away. The cars will be able to transmit and receive information on speed, direction, and location. An example of how this data can be used is in detecting a car coming up a side street that could pose a possible collision risk. The cars will also be able to transmit data about brake use, hazard lights, and low traction situations for advance warning of hazards. The warnings can be displayed on the instrument panel and heads-up display. Currently, the system only communicates with other CTS sedans equipped with the technology. According to Chris Bonelli at Cadillac part of the reason is that the CTS will be the only car with the equipment on US roads at the moment, but it also isn't currently set to communicate with other cars if they were to be offered right away. However, he said that the company is absolutely willing to work with other companies to make the system compatible if or when other cars are offered with the technology. This V2V system also doesn't send data to any sort of network, instead only communicating with nearby cars. For the time being, this precludes the possibility of receiving road condition information from cars that are farther away. But as Cadillac points out, it should work under any conditions with no delay since it isn't dependent on information from a network. As far as security is concerned, Bonelli told us that the Cadillac system does have firewalls and other security measures to keep it protected from interference. He also said the cars don't store any data they receive. In addition, none of the data could be used to identify a particular person. The cars use a radio frequency set aside by the government for this use. The introduction of this technology also puts Cadillac well ahead of proposed legislation by the Department of Transportation. The organization wants this type of short-range V2V communications equipment to be a standard feature by 2023, believing the technology could prevent many injuries and deaths due to crashes. Related Video:

Cadillac recalls 120k examples of ATS for fire risk

Cadillac is recalling a total of 119,339 units (96,145 in the US alone) of the 2013-2016 ATS sedan, because the coil antenna module that powers the rear defogger can overheat. The problem has been linked to four fires, but there have been no injuries, fatalities, or crashes, according to the automaker. During manufacturing, the antenna might have been produced with "critically weak terminal connectivity." If being cycled on and off often or used continuously, these faulty examples can overheat, leading to a fire in the driver's side rear pillar. According to the company, "less than 1 percent of the recalled vehicles are expected to have the condition." According to the National Highway Traffic Safety Administration (in a PDF), the fix is a reflash for the ATS' Electronic Climate Control module that automatically turns on the rear defogger when the engine starts. In addition, 2013 models keep the system on continuously at low temperatures at highway speeds and this is also being disabled in the update. The changes are meant to cycle the coil less often, but owners can still turn it on manually. Related Video: GM Statement: General Motors is recalling approximately 96,145 2013-16 model year ATS sedans in the U.S. Some of these vehicles may have been manufactured with critically weak terminal connectivity in the coil antenna module, which powers the rear defogger system. If the module has the condition and is subjected to excessive cycling or continuous operation, it may overheat and a fire may develop inside the rear pillar on the driver's side of the vehicle. Less than 1 percent of the recalled vehicles are expected to have the condition. GM is aware of four fires but no injuries, fatalities or crashes. Including Canada, Mexico and exports, the total population of the recall is approximately 119,339. RECALL Subject : Rear Defogger Coil Antenna Module may Overheat Report Receipt Date: SEP 03, 2015 NHTSA Campaign Number: 15V558000 Component(s): VISIBILITY Potential Number of Units Affected: 96,145 All Products Associated with this Recall Vehicle Make Model Model Year(s) CADILLAC ATS 2013-2016 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2013-2016 Cadillac ATS sedan vehicles manufactured April 23, 2012, to September 2, 2015. In the affected vehicles, the coil antenna module that powers the rear defogger system may generate excessive heat due to excessive cycling or continuous operation.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging