1998 Cadillac Eldorado,clean Title,rust Free,michelin Tires on 2040-cars

Auto blog

Cadillac's 4.2-liter Blackwing V8 to die with the CT6?

Cadillac's 4.2-liter twin-turbo Blackwing V8 debuted only last year, popping up in the CT6 V-Sport — now the CT6-V — with 550 horsepower and 627 pound-feet of torque. The engine's been stymied in every attempt to power a different Cadillac model since then. Its only two use cases have been a first and second run of the original, limited-edition super sedan and the CT6 Platinum V8 trim at a slightly detuned 500 hp and 553 lb-ft. Motor Trend cites "a highly placed source at GM" as saying that the Blackwing won't go into the coming high-performance version of the CT5-V nor in the next-gen Escalade. Left without options, there's a chance the Blackwing will die with the CT6, itself a sedan with its grille on the executioner's block just waiting for the bite of an ax that might or might not shortly fall. Cost-cutting has been tagged as the reason for this misfortune; Cadillac's sales malaise and lack of clarity as to how to turn sales around led GM to downsize the brand's allowance. The parent company chose to build the new CT5 on the Alpha platform used for the erstwhile ATS and CTS instead of the Omega platform underpinning the CT6. Along with that choice, the MT report says expense reasons nixed fitting the Blacking V8. We know the lower-tier V series CT5 will work with a twin-turbo 3.0-liter V6 making 355 hp and 400 lb-ft. When we heard spy video of the upper-tier V series CT5 out testing, the engine sounded like the 6.2-liter supercharged V8 that would be a carryover from the last model.  The XT6, also rumored to get some V sauce, simply can't fit the V8. Instead of sitting on the Omega platform as once planned, the XT6 rides on the C1XX architecture under other GM products like the Buick Enclave and Chevrolet Traverse. The C1XX engine bay doesn't have room for a stouter V6, much less a hi-po V8. The next-gen Escalade ruled itself out due to price issues in back, not in front. MT writes that the independent rear suspension supporting GM's next-gen full-sized SUV quartet has burned through cash in development, putting engineers a few direct deposits short of the funds needed to massage Blackwing installation. Earlier this year at least one report said the twin-turbo DOHC V8 could serve the top-spec next-gen Escalade. More recent reports of a performance-heavy next-gen Escalade have predicted the 6.2-liter supercharged LT4 V8 from the Chevrolet Camaro ZL1 and Corvette Z06.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.

Cadillac XT3 caught covered in copious camouflage

While a bit difficult to tell thanks to the impressive camouflage used, what we're looking at here is likely the upcoming Cadillac XT3. There are a few details that stand out to lend credence to this prediction. There are a handful of sharp angles scattered throughout that are in line with Cadillac's modern design language. Specifically in the LED running lights and on the side mirrors. The rear profile also is reminiscent of the current, and slightly larger XT5. The rear lights extend into the D-pillars, which would match the current Escalade. We get a pretty clear picture of the rear suspension on this XT3. It's clearly an independent rear suspension using coil springs. While General Motors uses independent suspension on some of its crossovers, we can't quite match it to a particular model. We believe that if the XT3 is based on an existing model (which it almost certainly is), the platform and suspension have been substantially modified. The XT3 could use a version of the D2XX platform that underpins the Buick Envision. However, we know from a previous report that the XT3 will likely be built at the factory that produces the Buick LaCrosse and Chevy Malibu. The XT5 uses a modified version of the LaCrosse/Malibu platform, so it's possible the XT3 could use a shorter version of the XT5 chassis. Depending on how small the XT3 ends up being, it might even share a platform with the Chevy Trax and Buick Encore. However, considering their economy car roots and torsion-bar rear suspension, we think that's the least likely. Regardless of what chassis is underneath its crisp bodywork, we expect the XT3 to be released sometime next year. Related Video: