1976-ivory & Tan Leather~original California Owner Car With 10k Original Miles! on 2040-cars

Auto blog

Expect the Cadillac XT3 small crossover in late 2018

Cadillac's sedan-heavy lineup can't complete in this crossover-crazy market, it seems. The Detroit News spoke to Cadillac boss Johan de Nysschen and found out some more details about the brand's plan to alter its lineup to cater more to current consumer tastes. It's no surprise that these plans would include a small crossover, because de Nysschen has been talking about a vehicle smaller than the XT5 like this since at least 2015. The report also pins the Fairfax Assembly Plant, where GM builds the Buick LaCrosse and the Chevrolet Malibu, as the site for what could be called the XT3's production. That's not an immediately obvious choice, since the LaCrosse and Malibu are based on the latest evolution of the Epsilon platform, known as E2XX. And the XT5 is based on a crossover version of that same platform (known as C2XX), while XT3 is expected to be smaller than the XT5. So perhaps there's a different assembly line going into Fairfax, or the C2XX platform can be significantly shortened. We assume that the XT3 would be built on a smaller platform, perhaps the Gamma II that underpins the Chevrolet Trax and Buick Encore – which are built in either South Korea or Mexico, depending on which market they are to be exported to. The Encore is selling very well for Buick, with sales figures increasing through late last year. Another possibility is the D2XX platform that underpins the Chinese-built Buick Envision and the GMC Terrain and Chevrolet Equinox, perhaps with assembly happening at the CAMI plant in Ontario. At this early stage, without confirmation of GM as to what platform the XT3 will use or where it will really be built, it's too early to say what the Fairfax rumor means. This isn't the first time we've heard about a small Cadillac crossover. Back in 2015, de Nysschen told us to expect it sometime in 2018. But later that year, speaking to Reuters, he posited that it'd be closer to 2019. The Detroit News says de Nysschen told them it'll launch in the second half of 2018, splitting the difference between what we'd heard previously. Remember, Cadillac's only two vehicles in the segment are the XT5 and Escalade. We know that the brand is almost certainly scrambling to fill the holes in that side of the lineup. We think a three-row crossover will slot between the two, probably called the XT7.

Weekly Recap: Ford GT inspires guitar, foosball table, sailboat

Ford design vice president Moray Callum had just wrapped up a briefing on the interior of the Ford GT last month, but something seemed out of place. He grinned and pointed behind him, "You might be wondering why I have a boat behind me," he said mischievously. It was there because Ford set its designers on a mission to stretch and showcase their talents: design non-automotive objects inspired by the interior of the GT supercar. Callum received quite a response, too. His team produced a guitar, a foosball table (yeah bro!), a racing sailboat, a Wi-Fi speaker and some furniture. As the veteran design chief explained, "It's a really great exercise both to highlight our designers' talents, but also to really see how our design philosophy can work and how you can use it and get a common response back from a worldwide design team." Guitar View 25 Photos The objects have been on display this week at the Salone del Mobile furniture and fashion design fair in Milan, Italy, where Ford has had a presence for three years. There's also a light exhibition that apparently was inspired by the GT, as well. While this might seem a little far-fetched for the automaker, Ford said exhibitions like the Salone del Mobile give its designers another way to be creative and ultimately produce striking interior style. Ford wants this to be a differentiator, as research shows consumers are placing emphasis on the layout and features inside when they're making a decision about buying a new car. It's a little light hearted – but it's also potentially big business. Other News & Notes Cadillac CT6 platform could be used for Buick General Motors product chief Mark Reuss said the Cadillac CT6 platform could be used for a large Buick, though "not yet," Automotive News reported. The underpinnings can accommodate rear-wheel or all-wheel drive and would give Buick the large flagship it lacks. The report jibes with comments Reuss made at a roundtable with Autoblog and other reporters at the New York Auto Show. When asked if Buick had space for a large car on the CT6 chassis, he replied, "Yeah, I think it does. Yeah, I think we do." Buick has revamped its lineup in recent years with attractive crossovers and small and midsize sedans, but hasn't added the proverbial flagship that's yearned for by enthusiasts. Buick surprised industry observers with the stylish Avenir concept at the Detroit Auto Show earlier this year that raised the possibility of a halo sedan.

Al Capone’s bulletproof 1928 Cadillac Town Sedan is back on the market

It turns out that infamous mob boss Al Capone played an early role in the development of the modern armored executive car, and now there’s another chance to own his bulletproof 1928 Cadillac Town Sedan, which is being offered by Celebrity Cars of Las Vegas for a cool $1 million. It was last seen netting $341,000 at auction by RM SothebyÂ’s in 2012 and does not appear to have undergone significant restoration since then, raising the question of why its value has jumped nearly threefold. Painted green with a black roof, fenders and bumpers, the car is said to be the earliest surviving bulletproof vehicle, with nearly inch-thick glass and once lined (but no longer; read on) with nearly 3,000 pounds of asbestos-wrapped steel armor plating. It features a rear window rigged to drop quickly, so the tough guys in the rear seats could fire on any pursuers. Heavy spring lifts operated the side windows, which were also rigged to raise higher than usual to reveal a circular cutout big enough for the muzzle of a machine gun. In this case, the factory specs may be the least interesting part of the car, though it is undeniably a looker. It features a Series 341-A, 90-bhp, 341 cubic-inch L-head V8 engine mated to a three-speed manual, with a beam front axle and full-floating rear axle with semi-elliptical leaf springs and four-wheel mechanical drum brakes. It has only 1,111 miles on the odometer, having spent much of its history in museums or on display at carnivals and amusement parks. ItÂ’s believed to have flown under the fedsÂ’ radar in a Chicago garage owned by Emil Denemark, a known mafia associate and South Side Cadillac dealer who was related to Capone by marriage, when the mob boss began his slide into legal troubles leading up to his eventual felony conviction and jail time. In 2008, an elderly man named Richard “Cappy” Capstran told a friend that he had once helped his father install armor plating on a Cadillac owned by Al Capone. His father, Ernest Capstran, had repaired another of CaponeÂ’s vehicles and earned the mobsterÂ’s business fortifying the brand-new Cadillac. “My dad said, ‘We donÂ’t do that kind of work here.Â’ And they (CaponeÂ’s men) said, ‘You do now,’” Richard Capstran recalled in a recorded interview, per SothebyÂ’s. CaponeÂ’s associates reportedly also backed the car into the shop so no one could see what kind of work was being done to it.