1976 Cadillac Eldorado on 2040-cars

Auto blog

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.

2013 Cadillac XTS [w/video]

The Cadillac Of Stopgaps
As confusing as most alphanumeric car names have gotten in recent years, at least one constant has been that the letter "X" is generally indicative of a crossover. Then why did General Motors use this letter on its new 2013 Cadillac XTS luxury sedan? Well, for that, we'll have to look to the world of mathematics where "X" stands for an unknown variable or a placeholder. Now we're talking. The XTS is just an interim product sitting at the top of Cadillac's four-door food chain until the brand gets a true flagship in place. That sounds like a lot of resources to spend on what will likely be a one-and-done model, but the automaker needed to get something - anything - to replace the DTS.
So here you have the 2013 XTS. A big luxury sedan that was created to bridge the gap between Cadillac's recent past and its pending future. Going into our week with this XTS knowing that it was a stopgap measure proved to be both a blessing and a curse. On one hand, we know (or hope) that this car will act as a baseline for future high-end Cadillac models, but at the same time, we couldn't help but be mindful of past stopgap models, albeit in more entry-level segments, like the Cimarron and Catera.