1962 Cadillac Custom on 2040-cars

Auto blog

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles

Cadillac's 4.2-liter Blackwing V8 to die with the CT6?

Cadillac's 4.2-liter twin-turbo Blackwing V8 debuted only last year, popping up in the CT6 V-Sport — now the CT6-V — with 550 horsepower and 627 pound-feet of torque. The engine's been stymied in every attempt to power a different Cadillac model since then. Its only two use cases have been a first and second run of the original, limited-edition super sedan and the CT6 Platinum V8 trim at a slightly detuned 500 hp and 553 lb-ft. Motor Trend cites "a highly placed source at GM" as saying that the Blackwing won't go into the coming high-performance version of the CT5-V nor in the next-gen Escalade. Left without options, there's a chance the Blackwing will die with the CT6, itself a sedan with its grille on the executioner's block just waiting for the bite of an ax that might or might not shortly fall. Cost-cutting has been tagged as the reason for this misfortune; Cadillac's sales malaise and lack of clarity as to how to turn sales around led GM to downsize the brand's allowance. The parent company chose to build the new CT5 on the Alpha platform used for the erstwhile ATS and CTS instead of the Omega platform underpinning the CT6. Along with that choice, the MT report says expense reasons nixed fitting the Blacking V8. We know the lower-tier V series CT5 will work with a twin-turbo 3.0-liter V6 making 355 hp and 400 lb-ft. When we heard spy video of the upper-tier V series CT5 out testing, the engine sounded like the 6.2-liter supercharged V8 that would be a carryover from the last model.  The XT6, also rumored to get some V sauce, simply can't fit the V8. Instead of sitting on the Omega platform as once planned, the XT6 rides on the C1XX architecture under other GM products like the Buick Enclave and Chevrolet Traverse. The C1XX engine bay doesn't have room for a stouter V6, much less a hi-po V8. The next-gen Escalade ruled itself out due to price issues in back, not in front. MT writes that the independent rear suspension supporting GM's next-gen full-sized SUV quartet has burned through cash in development, putting engineers a few direct deposits short of the funds needed to massage Blackwing installation. Earlier this year at least one report said the twin-turbo DOHC V8 could serve the top-spec next-gen Escalade. More recent reports of a performance-heavy next-gen Escalade have predicted the 6.2-liter supercharged LT4 V8 from the Chevrolet Camaro ZL1 and Corvette Z06.

Cadillac clears camo off the XT3 revealing grille, lighting details

Up until now, every Cadillac XT3 we've seen has been buried under covers and vinyl wraps, but one of our spy photographers recently captured a group of them with significantly less camouflage. As a result, we finally get a relatively clear picture of what the car will look like. The nose blends the look of current Cadillacs with cues from last year's Escala concept. The headlights still appear to stretch up into the top of the fenders like its production brethren, but they don't descend as far down the front fascia, a hint of Escala influence. The grille also features more of egg-crate mesh like that Cadillac concept. In profile, we can see evidence of the XT3's smaller size compared with the XT5, mainly in the lack of any glass area behind the rear door. Other evidence of the smaller size is that our spy photographer reports the cars were being tested alongside the BMW X3 and Mercedes-Benz GLC-Class. The profile also shows that the XT3 will have a hard-edged rear end with a rakish hatch. At the back, there isn't a whole lot to report, but the taillights look like they'll be interesting. There appears to be a horizontal element in the middle of the hatch similar to what we've seen on the Escala and the refreshed XTS. We can also see some lights up on the C-pillar, which indicates that the XT3 will also have tall vertical elements up those pillars like on the Escalade. We expect the XT3 to show up late in 2018. It will likely be powered by a turbocharged four-cylinder of some sort, and because it will probably be based on an existing GM crossover or sedan platform, it will probably have front-wheel drive and/or a front-drive based all-wheel-drive system. Related Video: Featured Gallery Cadillac XT4 Spy Shots View 13 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt3