We Finance 2008 Cadillac Dts 1owner Cleancarfax Cd Wrrnty Kylssent Hids Rmtstart on 2040-cars

Auto blog

Cadillac CT6 loses the entry-level 2.0-liter turbo four-cylinder

General Motors continues its engine rationalization among product lines. A few days after Chevrolet dropped the old-generation LTG 2.0-liter turbocharged four-cylinder from the Traverse, Cadillac has jettisoned the new-gen LSY 2.0-liter turbo four from the CT6 range. Given a look at the dealer ordering system, Cadillac Society said the 2.0-liter option shows "built out" or "no longer available," and the online configurator at the Cadillac site confirms the omission. The retired engine can be had in the XT4 crossover, rated at the same 237 horsepower and 258 pound-feet of torque. This means a couple of things for the big sedan. The CT6 entry price was $50,495 before destination, but fitted with the now-base 3.6-liter six-cylinder, the entry price has gone up to $55,495. The other change is that rear-wheel drive is no longer available; the three remaining engine choices come with all-wheel drive. Those engines are the NA 3.6-liter V6 with 335 hp and 284 lb-ft of torque, a 3.0-liter twin-turbo V6 with 404 hp and 400 lb-ft, and coming in a few months, the detuned 4.2-liter Blackwing twin-turbo V8 with 500 hp and 574 lb-ft, down from 550 hp and 627 lb-ft. Cadillac Society thinks one of the possibilities for making the move could be that GM is having a hard time meeting demand for the 2.0-liter. That might be, but we think no matter the reason, the result puts more logical pricing between the midsize CTS/CT5 and the full-size luxury flagship. We don't know how Cadillac will price the coming CT5, but there's now an $8,005 difference between the CTS and the CT6, instead of the $4,000 gap when the 2.0-liter was a CT6 option. Mercedes-Benz, for instance, puts a $12,000 gap between the C-Class and the E-Class, a $38,000 gulf between the E-Class and the S-Class. There's a $19,000 difference between an Audi A4 and A6, a $25,000 difference between an A6 and an A8. It isn't clear if this will affect every other market where the CT6 is sold. The Canadian, Mexican, and French Cadillac site configurators don't list the 2.0-liter turbo, but the Chinese Cadillac site does.

Cadillac introducing V2V communications on 2017 CTS sedans

While Audi has introduced vehicle-to-infrastructure technology in select cars in select cities, Cadillac is focusing on vehicle-to-vehicle (V2V) communications, and it all starts with the CTS sedan. Starting this month, the company will be adding V2V equipment to 2017 models. The feature will be standard on cars in the US and Canada. These V2V devices will allow these new Cadillacs to communicate with each other up to 980 feet away. The cars will be able to transmit and receive information on speed, direction, and location. An example of how this data can be used is in detecting a car coming up a side street that could pose a possible collision risk. The cars will also be able to transmit data about brake use, hazard lights, and low traction situations for advance warning of hazards. The warnings can be displayed on the instrument panel and heads-up display. Currently, the system only communicates with other CTS sedans equipped with the technology. According to Chris Bonelli at Cadillac part of the reason is that the CTS will be the only car with the equipment on US roads at the moment, but it also isn't currently set to communicate with other cars if they were to be offered right away. However, he said that the company is absolutely willing to work with other companies to make the system compatible if or when other cars are offered with the technology. This V2V system also doesn't send data to any sort of network, instead only communicating with nearby cars. For the time being, this precludes the possibility of receiving road condition information from cars that are farther away. But as Cadillac points out, it should work under any conditions with no delay since it isn't dependent on information from a network. As far as security is concerned, Bonelli told us that the Cadillac system does have firewalls and other security measures to keep it protected from interference. He also said the cars don't store any data they receive. In addition, none of the data could be used to identify a particular person. The cars use a radio frequency set aside by the government for this use. The introduction of this technology also puts Cadillac well ahead of proposed legislation by the Department of Transportation. The organization wants this type of short-range V2V communications equipment to be a standard feature by 2023, believing the technology could prevent many injuries and deaths due to crashes. Related Video:

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.