Leather Chrome Wheels Heated Seats Super Clean on 2040-cars

Auto blog

2019 Cadillac ATS-V Coupe Drivers' Notes Review | Not your granddad's Coupe de Ville

The 2019 ATS-V is Cadillac's smallest car, slotting below both the CTS and CT6 sedans. It's also the automaker's only two-door model, helping compete against the Audi RS5, BMW M4 and Mercedes-AMG C 63 Coupe. Based on the GM Alpha platform, the ATS shares more than a little with the Chevrolet Camaro. Unlike the Camaro, the high-performance V variant uses a twin turbo V6. Like the Chevy, power is sent to the rear wheels through either a six-speed manual or eight-speed automatic. Our Wave Metallic blue test car has about $10,000 worth of options, the most expensive of which are the $2,300 Recaro sport seats. The Luxury Package — alloy pedals, HID headlights, navigation and a Bose stereo system — tacks on another $2,100. There are some visual upgrades, too, including $1,295 for a dealer-installed carbon-fiber engine cover. All in, this ATS-V rang up for $78,775. Editor-in-Chief Greg Migliore: Cadillac has problems, but the ATS-V coupe isn't one of them. It's everything former Cadillac president Johan de Nysschen hoped the brand could achieve in the sporting realm. The car has a tight yet tolerable suspension. The steering is direct but not overly weighted. The engine burbles and growls with noticeable attitude. It's all underscored by the six-speed manual transmission, which has a heavy clutch and requires precise throws. It's a serious sports coupe for enthusiasts. Cadillac's style is brash, edgy and sharp. It's all of those things literally and figuratively. Note the cuts and creases. The ATS is borderline severe – but I like it. I think it's smart for Cadillac to really go for it in the design department. Cadillac is again tweaking its lineup and the ATS sedan and ultimately the coupe will be replaced. Still, there's a place for a car like the ATS-V coupe in the Caddy stable. There should be, anyway. The devil is in the engine, but the details of the @Cadillac ATS-V Coupe aren't bad either. @therealautoblog pic.twitter.com/7fQOrBkxeE — Greg Migliore (@GregMigliore) October 29, 2018 Associate Editor Reese Counts: I forgot how great this thing is to drive. I won't repeat all of Greg's comments, but suffice it to say that it's everything you want in a luxury sports coupe — direct steering, a chassis that balances performance and comfort and a potent engine. Combine sharp styling and competitive pricing, and you have one of the most compelling non-German luxury cars on the market.

2020 Cadillac CT6-V First Drive | A new kind of V

One of the weird tidbits of car news in the past year was the change in naming for the 2020 Cadillac CT6-V. When it was first revealed, it was called V-Sport, the term previously used for Cadillacs with more moderate performance upgrades than the full-blown V cars that possessed massive power outputs and serious track-going capabilities. But then, before the car in question went on sale, Cadillac changed the name to match the equally moderately sporty CT4-V and CT5-V that officially downgraded the V name. So what should we make of this CT6-V, then? Is it a hardcore performance machine like the old V cars? Or is it what we’re expecting of the new V cars: a lightly upgraded version of the base car that isnÂ’t particularly distinguished? As it turns out, the CT6-V sits between these two extremes to create a car thatÂ’s involving and exciting for the driver without compromising the CT6Â’s refinement and luxury. Mechanically, the CT6-V is ultimately closer to its full-bore V predecessors. The highlight is the “Blackwing” twin-turbocharged 4.2-liter V8 that makes 550 horsepower and 640 pound-feet of torque. Besides giving the engine prodigious output, Cadillac borrowed some pages from the AMG handbook: the turbocharger is nestled in between the cylinder heads, just like the current 4.0-liter AMG V8, and each engine is hand-built start to finish by one of six engine builders. The builderÂ’s name is even featured in the engine bay. TheyÂ’re special details that fit the idea of the old V cars, but the fact that a version of the same engine is in the Platinum CT6 does make its inclusion in the CT6-V seem less special, even if its output is notably less at 500 horsepower and 574 pound-feet of torque. Setting aside the details, the engine performs well in the real world. ItÂ’s astonishingly smooth, exactly what you want from a fast flagship. It also emits a unique exhaust note thatÂ’s both raspy and growly. You wonÂ’t mistake it for a pushrod powerplant. The power and torque provide a prominent push at all points in the rev band after a brief moment for the turbos to spool up. ItÂ’s just a shame there isnÂ’t much of a rev band, as the engine redlines at 6,000 rpm, which is easy to hit thanks to the engineÂ’s creamy character. ItÂ’s so low one wonders why Cadillac bothered developing a double-overhead-cam engine at all. The V8 is coupled to a 10-speed automatic transmission and all-wheel drive. The 10-speed is perfectly fine when cruising around town.

GM adds 1,200 jobs at Detroit-Hamtramck plant

General Motors is making a big move at its Hamtramck, MI, factory, announcing it will add a second shift and hire over 1,200 workers within the next several months. It's expected that by early 2016, the factory will employ over 2,800 workers to build the Chevrolet Volt, Impala, Malibu, Cadillac ELR, and by early next year, the new CT6. According to GM Hamtramck spokesperson Courtney Zemke, 40 of the 1,200 positions are for salaried employees, while the remainder will be hourly positions. As for where these employees will go, positions are being made available across the factory, so GM isn't focusing on any particular area for its new hires. It's a similar story behind the hiring surge itself. GM said in its press release that the "second shift is necessary to meet forecasted market demand," a position Zemke reiterated. It's a matter of demand across the plant's portfolio, rather than any one particular product seriously outstripping supply. Naturally, the United Auto Workers is happy with the move. "The workforce at Detroit-Hamtramck is second to none," UAW Local 22 Shop Chairman Don LaForest said in the attached release. "We appreciate the opportunity to expand our UAW-GM family." Hiring is going on now, with the second shift slated to get underway in early 2016. GM's Detroit-Hamtramck Assembly to Add Second Shift and More Than 1,200 Jobs Plant will nearly double its workforce by early 2016 2015-10-22 DETROIT – General Motors is nearly doubling its workforce at Detroit-Hamtramck Assembly by adding a second shift and more than 1,200 hourly and salaried jobs. The addition of a second shift will increase the plant's workforce to approximately 2,800 people when hiring is completed. The second shift is necessary to meet forecasted market demand for the five cars produced at Detroit-Hamtramck. "This is the result of the award-winning vehicles Detroit-Hamtramck produces and the confidence GM has in our team to build world-class quality for our customers," said Plant Manager Gary West. Second shift hiring is underway, and the shift is scheduled to begin operations in early 2016. "The workforce at Detroit-Hamtramck is second to none," said UAW Local 22 Shop Chairman Don LaForest. "We appreciate the opportunity to expand our UAW-GM family." The 4.1 million-square-foot Detroit-Hamtramck Assembly opened in 1985. GM has invested $1 billion in the plant over the last six years, making it one of the company's most-agile manufacturing facilities in North America.