1992 Cadillac Coupe Deville on 2040-cars

Auto blog

GM announces six new recalls, covering 3.5 million vehicles

General Motors has just initiated another crushingly large recall, this time affecting some 3.36 million vehicles built between 2000 and 2014 and sold in the US, Canada and Mexico. Once again, the issue surrounds the cars' ignition switches, which can be kicked out of the run position if they're carrying extra weight or if they experience a "jarring" event. In this particular case, though, GM will modify the keys, rather than the ignition itself.
A four-by-six-millimeter hole will be drilled into the key, which will more safely accommodate the weight of the key ring. As is usually the case, the work will be done free of charge. The recalled vehicles include the 2000 to 2005 Cadillac Deville, 2004 to 2005 Buick Regal LS and GS, 2004 to 2011 Cadillac DTS, 2005 to 2009 Buick Lacrosse, 2006 to 2008 Chevrolet Monte Carlo, 2006 to 2011 Buick Lucerne and 2006 to 2014 Chevrolet Impala. Only the Impala is still in production, and even then, it's only sold to fleet companies.
According to an official statement from GM, there have been eight crashes and six injuries due to this latest issue. As if this isn't a dire enough blow for GM, the company has announced five smaller recalls, covering 165,000 vehicles.

2020 Cadillac CT5 loses the fake scoop

Well folks, the inevitable has happened. The 2020 Cadillac CT5 luxury sports sedan prototype has shed its hood scoop. Yes, we're as disappointed as you are that instead of being outrageous and brash, Cadillac is still going to try to be classy, understated and luxurious when it comes to its mainline models. And yes, we're being sarcastic here ... but there's a part of us that would kind of like to see the scoop survive. Anyway, the good news is that the scoop is only one of a few bits of fake bodywork and camouflage that the CT5 has shed. As such, we get our best look yet at the new Cadillac sedan, and it looks pretty good. The grille is very wide and not nearly as tall as the prominent prows of current Cadillacs. It actually doesn't even look as tall as the grille of the Escala concept that inspired the CT5's design. The profile of the CT5 isn't too radically different from existing Caddies, with a long hood and a short trunk. It is still a conventional sedan, though, and not a sedan-like hatchback like the Kia Stinger and Audi A5 Sportback and A7. This is evident by the open trunk lid our spy photographer caught. The taillights also continue to be slim and vertical, though we can't quite tell if they will have a horizontal elements at the bottom like on the XTS and XT4. The car also has very bold and thick angular exhaust tips. We expect the CT5 will go into production in 2019 as a 2020 model, and it will likely take the place of both the CTS and ATS, but not be much smaller than the CTS. It will likely use versions of existing Cadillac engines including the 2.0-liter turbo four-cylinder, naturally aspirated 3.6-liter V6, and twin-turbo 3.0-liter V6. We wouldn't rule out the 4.2-liter twin-turbo V8 for a potential CT5-V in the future. Related Video:

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.