1965 Cadillac Coupe Deville Convertible ~ Restore Or Enjoy As It Is ~ Red/white on 2040-cars

Auto blog

Cadillac introducing V2V communications on 2017 CTS sedans

While Audi has introduced vehicle-to-infrastructure technology in select cars in select cities, Cadillac is focusing on vehicle-to-vehicle (V2V) communications, and it all starts with the CTS sedan. Starting this month, the company will be adding V2V equipment to 2017 models. The feature will be standard on cars in the US and Canada. These V2V devices will allow these new Cadillacs to communicate with each other up to 980 feet away. The cars will be able to transmit and receive information on speed, direction, and location. An example of how this data can be used is in detecting a car coming up a side street that could pose a possible collision risk. The cars will also be able to transmit data about brake use, hazard lights, and low traction situations for advance warning of hazards. The warnings can be displayed on the instrument panel and heads-up display. Currently, the system only communicates with other CTS sedans equipped with the technology. According to Chris Bonelli at Cadillac part of the reason is that the CTS will be the only car with the equipment on US roads at the moment, but it also isn't currently set to communicate with other cars if they were to be offered right away. However, he said that the company is absolutely willing to work with other companies to make the system compatible if or when other cars are offered with the technology. This V2V system also doesn't send data to any sort of network, instead only communicating with nearby cars. For the time being, this precludes the possibility of receiving road condition information from cars that are farther away. But as Cadillac points out, it should work under any conditions with no delay since it isn't dependent on information from a network. As far as security is concerned, Bonelli told us that the Cadillac system does have firewalls and other security measures to keep it protected from interference. He also said the cars don't store any data they receive. In addition, none of the data could be used to identify a particular person. The cars use a radio frequency set aside by the government for this use. The introduction of this technology also puts Cadillac well ahead of proposed legislation by the Department of Transportation. The organization wants this type of short-range V2V communications equipment to be a standard feature by 2023, believing the technology could prevent many injuries and deaths due to crashes. Related Video:

Roll pins in recalled 2014-2015 Cadillac CTS V-Sports could crack

General Motors has issued a recall for select 2014-2015 Cadillac CTS V-Sport sedans due to roll pins in the rear differential that could crack. The recall only affects 2,866 vehicles, but it is expected that 100% of those vehicles have the defective parts. According to NHTSA Campaign No. 20V038000, 2014-2015 CTS V-Sports built between July 1, 2013 and May 15, 2015 have roll pins in the rear-axle differential that could "fatigue" and "fracture." If these pins were to break while the vehicle is in motion, it could cause the rear to lock up, which might create a potentially dangerous driving situation. In September 2019, a GM engineer noticed a forum discussion about the problem with the V-Sports, which can be easily identified by their twin-turbo 3.6-liter V6 engines. Because he had dealt with similar issues with his own personal vehicle, he submitted a report, and an investigation was opened the next month. To make good with its customers, GM has promised to replace the rear differentials on all affected vehicles. The recall report says the roll pins in the replacement parts will have "increased strength" and a double-shear design rather than the original single-shear design.  GM plans to send customers recall identification notices starting March 9, 2020. 

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging