1957 Cadillac Coupe on 2040-cars

Auto blog

Junkyard Gem: 1993 Cadillac Allante

The General's Cadillac Division had lost much of its status as a world-class styling and engineering innovator by the 1980s, while younger rich Americans signed on the line which is dotted for European luxury machines packed full of futuristic technology. Something needed to be done to win back the hearts of those buyers, and that something was the Cadillac Allante two-seater. Here's a final-model-year Allante, complete with one of the very first Northstar V8 engines, found in a Denver yard. The overhead-valve Cadillac V8 engine of 1949 shook up the automotive world, and the double-overhead-cam Northstar V8 of 44 years later had a similar effect. Finally, a high-revving, smooth-running modern V8 to compete with those pesky European and Japanese carmakers! Only the Allante got the Northstar at first, with other Cadillac models following soon after. After the underwhelming power output of the pushrod HT4100 V8s used in the 1987-1992 Allantes, the upgrade from 200 horses to 290 helped boost sales of the '93 to the highest annual figure ever achieved by the model: 4,670 cars. Unfortunately for GM, production costs of the Allante proved to be murderous in the long run. Shortened Eldorado frames were loaded onto specially-fitted 747s in Detroit and flown to Pininfarina's new Allante factory in Italy. After Pininfarina built the bodies, they got loaded onto the 747s, flown back to Detroit, trucked to the Hamtramck assembly plant, and given running gear there. GM called this system the "Allante Air Bridge" and it cost plenty. The cars looked both futuristic and Italian, which they were, but the Allante's price tag stood at heights far above those of the rest of the Cadillac line: $59,975 in 1993, or about $108,500 in 2020 dollars. You could buy a rear-wheel-drive BMW 850Ci with a 282-horse V8 and manual transmission for a mere 10 grand over the Allante's cost that year, or a Jaguar XJS convertible for just $56,750. The Allante had front-wheel-drive and a not-so-modern four-speed automatic transmission, which hurt sales among the enthusiast types who flocked to Cadillac showrooms for the CTS-V a decade or so later. No European machine of 1993 could top the Mars Base appearance of these vertically-arranged, all-pushbutton HVAC/audio controls, though.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

Cadillac caught testing the upcoming XT3 SUV again

Days ago, the Cadillac XT3 was caught covered in more black plastic bags than an average Home Depot can hold. Now, more photos have surfaced of the compact crossover doing cold weather testing, still wearing binliner camo. There are still details that can be detected from underneath all the make-up, as the car wears a familiar Cadillac grille and edgy LED headlights. The rear shots do show tail lights fashioned into the camouflage, but those might be there just to throw everybody off: the C-pillars have lights way up from the usual spots, and that might be the location for the actual tail lights, giving the car characteristically narrow Cadillac style lighting in the rear. To match the German competition in this segment, it is likely that the XT3 will be powered by four-cylinder turbocharged engines, and the intercooler under the front bumper can be a confirmation of this. Featured Gallery Cadillac XT3 Winter Spy Photos View 10 Photos News Source: CarPixImage Credit: CarPix Spy Photos Cadillac SUV cadillac xt3 cadillac crossover