4.6l Coachroof Chrome Pkg Heated Ventilated Leather Seats Bluetooth One Owner on 2040-cars

Auto blog

GM cutting production at two plants

General Motors is continuing to adjust to excess supply of some of its brands' models. To get production more in line with the vehicles' actual demand, the automotive giant is idling two of its factories in North America in the coming months. The Orion Assembly plant is going to be down from March 9-13, according to an anonymous plant worker and another insider speaking to Automotive News. The factory builds the Chevrolet Sonic and Buick Verano, but there are plenty of both models sitting on dealer lots, including 216 days worth of Sonics, according to AN. The factory already had two idle periods announced to reduce the excess. In addition, downtime is scheduled at GM's "Flex" line at the Oshawa, Ontario, Canada, plant from April 13-17. This affects supply of the Chevrolet Camaro, Impala, Buick Regal and Cadillac XTS. Among them, the automotive giant has the largest supply of Regals ready for dealers with 213 days worth of them, according to AN. The future for the whole Oshawa factory is cloudy in general, though. There are rumors that it could close entirely in the future because the Camaro is leaving and the Regal and XTS might not last much longer than 2017. The Canadian government and the labor union there intend to put up a fight, though. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing Buick Cadillac Chevrolet GM orion assembly oshawa plant idle

2020 Cadillac CT5 loses the fake scoop

Well folks, the inevitable has happened. The 2020 Cadillac CT5 luxury sports sedan prototype has shed its hood scoop. Yes, we're as disappointed as you are that instead of being outrageous and brash, Cadillac is still going to try to be classy, understated and luxurious when it comes to its mainline models. And yes, we're being sarcastic here ... but there's a part of us that would kind of like to see the scoop survive. Anyway, the good news is that the scoop is only one of a few bits of fake bodywork and camouflage that the CT5 has shed. As such, we get our best look yet at the new Cadillac sedan, and it looks pretty good. The grille is very wide and not nearly as tall as the prominent prows of current Cadillacs. It actually doesn't even look as tall as the grille of the Escala concept that inspired the CT5's design. The profile of the CT5 isn't too radically different from existing Caddies, with a long hood and a short trunk. It is still a conventional sedan, though, and not a sedan-like hatchback like the Kia Stinger and Audi A5 Sportback and A7. This is evident by the open trunk lid our spy photographer caught. The taillights also continue to be slim and vertical, though we can't quite tell if they will have a horizontal elements at the bottom like on the XTS and XT4. The car also has very bold and thick angular exhaust tips. We expect the CT5 will go into production in 2019 as a 2020 model, and it will likely take the place of both the CTS and ATS, but not be much smaller than the CTS. It will likely use versions of existing Cadillac engines including the 2.0-liter turbo four-cylinder, naturally aspirated 3.6-liter V6, and twin-turbo 3.0-liter V6. We wouldn't rule out the 4.2-liter twin-turbo V8 for a potential CT5-V in the future. Related Video:

Cadillac CT6 V-Sport wants to take prisoners with 550-hp 4.2L TT V8

With the refresh of the Cadillac CT6 for 2019, Cadillac welcomes the first CT6 V-Sport as well as a new trim strategy. The changes at the front for the CT6 lineup don't appear substantial viewed head-on, one needs a side view to appreciate the greater three-dimensionality. Thinner headlights and a thinner bumper above a slightly larger lower front intake emphasize the mesh grille, and the vertical LED DRLs make more dramatic statements thanks to those narrower headlights. By angling the main units back toward the rear of the sedan, the CT6 now has a certified, sculpted snout. The rework appears to add substantial overhang, but overall length only increases by a tenth of an inch, to 204.1 inches. What's under the V-Sport's probing hood is just as interesting as the redesign and the sporting thrust: A clean-sheet design of a 4.2-liter DOHC twin-turbo V8. In the V-Sport, the engine produces 550 horsepower and a Bentley-esque 627 pound-feet of torque. As an optional engine elsewhere in the CT6 range, the same engine produces 500 hp and 553 lb-ft. The displacement, specs, plus the fact that "each engine will be hand-built at the Performance Build Center in Bowling Green, Kentucky" indicate this was one of the rumored powerplants for the mid-engine Corvette. The coming sports car was tipped to get a 4.2-liter and 5.5-liter DOHC twin-turbo V8. Based on the position of the turbos in this engine vs. their positions in the previous CAD drawings, we assume the drawings represented the 5.5-liter. (Note: Cadillac said Corvette will not get the new 4.2-liter twin-turbo engine.) The 4.2-liter item features an aluminum block, heads, and pistons, direct injection with a 9.8:1 compression ratio, cylinder deactivation, cylinder oil jets, and a variable-pressure oil system. The twin-scroll turbochargers capable of 20 pounds of boost sit in the 90-degree vee, working alongside twin water-to-air intercoolers, twin throttle bodies, and twin electric wastegates. Cadillac says 90 percent of torque arrives at 2,000 rpm and loiters through 5,200 rpm. Power gets sent through GM's 10L90 ten-speed automatic transmission and on to the standard all-wheel-drive system. Cadillac didn't list 0-to-60-mph times in its press release, but engineers have track-worthy alacrity in mind for the CT6 V-Sport.