2010 Used 4.6l V8 32v Automatic Fwd Onstar on 2040-cars

Auto blog

Cadillac CT6 Plug-in Hybrid is dead for 2019

Plug-in hybrids seem to have it hard at Cadillac. First there was the ELR flop, and now Cadillac is killing off the CT6 Plug-in Hybrid. The news of the hybrid's demise was first broken by GM Authority, and we received a statement from Cadillac confirming that it would be discontinued. With it disappearing for the 2019 model year, the CT6 Plug-in was only around for two model years, the same as the ELR. The Cadillac representative we contacted didn't say exactly why the CT6 Plug-in is being discontinued. All that was mentioned was that focus for the new model year would be on the refresh and the CT6-V. We would guess the hybrid is gone due to slow sales, but General Motors doesn't break out individual trims and powertrains in its quarterly delivery reports, so we can't say for sure. We're a bit disappointed that the CT6 hybrid is going away. We were pleased with its fuel economy and refinement when we had an opportunity to drive one, and its only real sacrifice was a smaller trunk. On the plus side, Cadillac's statement to us said that there are definitely additional electric vehicles coming to the brand, noting that some of the 20 promised electric vehicles from GM by 2023 will be Cadillacs. Related Video: Featured Gallery 2017 Cadillac CT6 Plug-in Hybrid View 15 Photos Image Credit: Cadillac Cadillac Hybrid Luxury Sedan cadillac ct6 cadillac ct6 hybrid

Cadillac XT4 crossover reveals its lighting

The upcoming Cadillac XT4 compact crossover has once again been spotted, this time with less camouflage and an update to its lighting. Specifically, the little crossover is sporting production lighting front and rear, and it's sure to make the luxury SUV one of the boldest-looking Cadillacs. Part of the reason for this comes from the taillights. As we suspected from the last set of spy shots, the XT4 will have highly distinctive lights that run the full height of the C-pillar. Though it's a similar design to that of the Escalade, it's made more interesting by the significant forward rake of the rear pillar. Not only that, but that pillar is quite thick, too. The look is actually reminiscent of the old CTS wagon. Moving around the side, the reduced camouflage reveals that the doors and quarter panels are fairly conservative and lacking in many creases or bulges. We can make out the edges of what will likely be black plastic fender flares and rocker panel cladding. Finally reaching the front, we see that the headlights are similar to those of many current Cadillacs, including the recently refreshed XTS sedan. The main part of the lamp starts high up and is slightly horizontal like the Escala concept, but they extend over the fenders and a strip of LEDs descends down the front. A previous report noted the XT4 will be built in Kansas on the Chevy Malibu platform. That means it will be a front-drive-based vehicle likely offering both front- and all-wheel-drive. Under the hood will probably be at least one turbocharged four-cylinder engine, with a second, more powerful upgrade option a possibility. We expect to see the fully revealed model to show up by the end of 2018. Related Video: Featured Gallery Cadillac XT4 spy shots View 15 Photos Image Credit: Brian Williams Spy Photos Cadillac Crossover SUV Luxury cadillac xt4 cadillac xt3

GM Ultium tech can scavenge heat from everywhere, even you

GM likes to give us tidbits about its Ultium platform from time to time, and today it’s telling us about the platformÂ’s ability to capture waste heat from the propulsion system. In addition to capturing from the propulsion system, it can also capture humidity from both inside and outside the vehicle and even from passengersÂ’ body heat. Yes, you, your family and/or your friends are a usable heat source as far as GM EVs are concerned. It then deploys the heat in an advantageous way. If at this point, youÂ’re screaming, "Heat pump!" youÂ’d be right. WeÂ’re talking about an elaborate heat pump system that GM is using for its Ultium-based vehicles. Every Ultium-based GM vehicle gets this system that is covered by 11 patents and four publications. The waste heat it collects is used in a number of ways, but its primary use is to heat the cabin quickly and efficiently. GM claims it can heat the cabin of its Ultium-based vehicles quicker than vehicles with traditional internal combustion engines. Plus, when put to use, GM claims that using the heat pump provides its EVs with up to 10% more range than theyÂ’d have without. Beyond heating the cabin, the heat pump is capable of putting waste heat to use by preheating the battery prior to charging so that you can charge quicker. The system can even cool the propulsion system in preparation for Watts to Freedom (WTF) launch control starts. GM says this was vital in helping the Hummer EV achieve its bonkers 0-60 mph time of about 3 seconds. “Having a ground-up EV architecture gives us the freedom to build in standard features like UltiumÂ’s energy recovery capabilities,” said Doug Parks, GM executive VP of global product development, purchasing and supply chain. “This helps us squeeze more efficiency, performance and overall customer benefit out of our EVs.” GM says itÂ’s been developing heat pump technology since the EV1 and its heat pump. This is the modern evolution of that technology, and GM says itÂ’s going to be implemented in every Ultium-based vehicle as a standard feature. Related video: Green Cadillac Chevrolet GM GMC Technology Electric Future Vehicles