2008 Mint Cadillac Dts Biarritz on 2040-cars

Auto blog

2016 Cadillac CT6 to get an aluminum body?

Well this is interesting: A hot-off-the-press report in Automobile claims the coming Cadillac CT6 will have an aluminum body. Most write-ups on the CT6 claim it will have a body that's a combination of aluminum and high-strength steel - Automobile itself wrote of "high-strength steel, aluminum, and steel stampings" in October. An all-aluminum body would be quite the reversal, contradicting the last four months of reportage and company statements on the matter. Mark Reuss, EVP of global development at General Motors, told The Detroit News in October, "We will create with the CT6, the world's most advanced body structure... [and] it's not aluminum. It's a stronger, smarter, safer premium luxury vehicle." It echoed the earlier Automobile story in saying the CT6 would use GM's "patented welding technology with high-strength steel, aluminum and steel stampings and castings." That same month, the Wall Street Journal ran a piece titled, "GM Won't Follow Aluminum Strategy in Future Cars," in which Reuss said, "making big statements around all carbon fiber, all aluminum, all magnesium, they're very interesting," and that GM wouldn't be doing it. That piece also circled back to a material mix and GM's special welding process, saying the CT6 "will have a body made of aluminum, high-strength steel and other materials, and will be 100 kilograms (220 pounds) lighter than a similar-sized car made of high-strength steel." We don't know what kind of body Cadillac's new assault on luxury is going to wear, but now we can't wait to find out. Featured Gallery Cadillac Elmiraj Sedan: Spy Shots View 22 Photos News Source: AutomobileImage Credit: Chris Doane Automotive Cadillac GM Luxury Sedan aluminum cadillac ct6

Fullsize GM SUVs have a problem that's making owners sick

Some fullsize SUV owners are getting sick, thanks to a buffeting and vibration problem in 2015 model year examples of the Chevy Tahoe and Suburban, Cadillac Escalade, and GMC Yukon. According to owners' complaints to the National Highway Traffic Safety Administration, the issue can vary from an annoying vibration inside the cabin to an experience so severe that it leads to dizziness and headaches. General Motors is aware of the complaints, but the fix isn't so simple. According to spokesperson Tom Wilkinson to Autoblog, the company "has been tracking this issue for a while." The problem has a fairly low incidence rate, but when it does occur the issue can be "uncomfortable and annoying for owners." There's no precise cause for the issue, Wilkinson claims, and in some cases, simply balancing the tires or changing the door seals can make it go away. However, not all of the fixes are so simple. AutoGuide dug deep into the problem and discovered a GM preliminary information bulletin that advised dealers to remove the headliner and to check the roof's bonds to the bows that go across the vehicle. However, that document included a note that the solution might not entirely eliminate things. According to AutoGuide, adding Dynamat insulation to the roof sometimes helped the problem. A GM spokesperson also told AutoGuide the company fixed the problem at the end of the 2015 model year, and didn't go into any more detail. This roof issue seems linked to some of the worst droning in these SUVs. According to one complaint from a 2015 Suburban owner to NHTSA: "Roof will not remain attached to the roof bows. This causes the buffeting similar to a window being down when all are up. The results span from annoying to painful." A 2015 Yukon owner claims to have another alleged cause for the problem in a NHTSA complaint from February 2015. This person brought their SUV to the dealer seven times over the course of four weeks for vibrations. The dealer replaced the driveshaft, suspension components, and more, but nothing worked. According to an engineer to the service adviser: "In an effort to prevent roll overs, they designed the frame and body mounts too stiff. There are 40 engineers working on issues, they have no solutions that work across the board." Wilkinson told Autoblog that GM is working with customers on an individual basis to rectify things. Since these are newer vehicles, dealers should also fix the problem under warranty.

Super Cruise’s failsafes

Even though Super Cruise is not a fully autonomous system, it incorporates redundancies like those used in aircraft to ensure failsafe operation. Before taking off on a 700-mile, 11-hour test drive of the system — and putting my life in its hands without my hands on the wheel — I sat down with Daryl Wilson, lead development engineer for Super Cruise, to get a deep dive into the system and its critical safety backups. Autoblog: First, what makes Super Cruise different from similar systems? Wilson: The key differentiator for Super Cruise is hand-free driving. It's an industry first in that respect. Our competitors require the driver at minimum to place their hands on the wheel with some frequency to ensure that the car knows that the driver is there. We don't. Two key technologies allow us to do this. One is our Driver Attention System, which is our methodology for making sure the driver is engaged with the vehicle and engaged with the road. This is a driver assist system, not a fully autonomous system. So it requires driver engagement. We use an infrared camera that constantly monitors the driver's face to determine the direction they're looking. We're looking for the driver to be what we call on-road — not on the center stack, not to left or right or down. That's all done by the tracking of the face. We also track that the eyes are open. It's infrared because at night you need to illuminate the face and you can't be shining a light into the driver's face. Then we have our lidar mapping that provides a foundation for control and redundancy to ensure safe performance. Autoblog: How does the mapping act as a redundant feature? Wilson: This system is only for use on divided, controlled access highways. What I mean by a divided highway is something more than a painted line between you and oncoming traffic. Whether that's a grassy area in between the lanes or a concrete barrier, anything that separates you from oncoming traffic. That's the divided highway part. The controlled access part is entrance ramps and exit ramps. Not with roads that cross at grade, with traffic crossing at the same level. To do that we geofenced these roads to ensure that operation is only allowed in these conditions. We don't just recommend you use it there; we ensure that you only use it there.