2008 Cadillac Dts 1-owner 62k Funeral Coach Deville Hearse High Top on 2040-cars

Auto blog

Recharge Wrap-up: Cadillac CT6 Plug-In on sale in China, Oregon utilities spur EV adoption

The Cadillac CT6 Plug-In is now available in China. The luxury plug-in hybrid sedan uses a turbocharged 2.0-liter engine plus two electric motors, which give the car a 0-62 mph time of 5.4 seconds. Its liquid-cooled 18.4-kWh lithium-ion battery pack gives the car an all-electric range of 50 miles, with a total range of 581 miles. Cadillac offers a 200V charger with the CT6 Plug-In, which provides a full charge in less than five hours. Owners can check charging status remotely using OnStar or the MyCadillac app. The CT6 Plug-In is offered in two variants, priced at about $80,400 and $94,800. Read more from GM. Two Oregon utilities are launching a program to increase EV adoption. Portland General Electric (PGE) will build six charging locations, each with up to four dual-standard fast chargers. PGE will also build and operate charging sites for electric buses, freeing up money for Portland's TriMet transit agency to spend on the actual buses. Pacific Power will also build public EV chargers, and lower some electricity rates for operators. Both companies will also work to inform the public about the benefits of electric mobility. Oregon utilities are required to stop using coal by 2030, and use 50 percent renewable energy by 2040, which will make EVs even cleaner. Read more at Green Car Reports. Continental says a shift to EVs will cost its company jobs. The automotive parts supplier's CEO, Elmar Degenhart, says that while the company will need to cut production jobs, those will be offset at least in part by the creation of new positions related to electric mobility. "There is enough time to design the process such that the blow is softened and major pain can be avoided," says Degenhart. Some 30,000 jobs at Continental are tied to combustion engines. Read more at Automotive News Europe. Featured Gallery 2017 Cadillac CT6 Plug-in Hybrid View 15 Photos News Source: GM, Green Car Reports, Automotive News EuropeImage Credit: Cadillac Green Hirings/Firings/Layoffs Cadillac GM Green Culture Electric Luxury recharge wrapup

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

GM and Ford quarterly sales continue to slump in China

BEIJING — General Motors and Ford announced their quarterly sales in China fell, albeit at a slower pace sequentially, as the U.S. automakers were hit by a slowing economy amid the Sino-U.S. trade war. GM's vehicle sales in China for the quarter ended June 30 dropped 12.2%, while Ford's sales slumped by 21.7%. While GM also suffered from heightened competition in its key mid-priced SUV segment, Ford was hurt by the limited new models for customers to choose from. For the first quarter of this year, Ford's sales in China tumbled 35.8 percent while GM's skid 17.5 percent. Still, the numbers from GM, the second biggest international automaker in China by sales, and Ford portend more uncertainty for the industry which is trying to rebound from a downward spiral that led to its first annual sales decline last year in more than two decades. GM delivered 1.57 million vehicles in China in the January-June period this year, while Ford delivered 290,321 vehicles. China's factory activity shrank more than expected in June, highlighting the need for more economic stimulus amid higher U.S. tariffs and weaker domestic demand. Annual car sales in China fell last year for the first time since the 1990s, and they are expected to fall this year too. Sales tumbled 16.4% in May from the same month a year prior, the China Association of Automobile Manufacturers (CAAM) said. That marked the 11th consecutive month of decline and followed falls of 14.6% in April and 5.2% in March. U.S. car companies' share of total China passenger vehicles sales fell to 9.6% in the first five months of this year from 10.9% in the year-ago period, according to CAAM. Over the same period, German car makers' share has risen to 23.3% from 20.9% and Japanese auto makers' to 21.3% from 17.3%. CAAM is set to announce June sales next week, which industry analysts forecast will be negative.   New models In China, GM has a joint venture with SAIC Motor Corp, in which the Buick, Chevrolet and Cadillac are made. It also has another venture, with SAIC and GuangxiAutomobile Group, in which they make no-frills minivans and have started to make higher-end cars. Sales of GM's affordable brand Baojun dropped 31.8% for the latest quarter. But luxury brand Cadillac's sales jumped 36.6%. GM sold 3.64 million units in China last year, down from 4.04 units in 2017. Ford makes cars in China through its joint venture with Chongqing Changan Automobile Co and Jiangling Motors Corp (JMC).