2014 Cadillac Ats 2.0l Turbo Luxury on 2040-cars

Auto blog

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).

Ecto-1 is the barn find of a lifetime in 'Ghostbusters: Afterlife'

Following the women-led "Ghostbusters" reboot in 2016, a completely new chapter in the franchise will be born in 2020. "Ghostbusters: Afterlife" will feature a fresh cast, a modern story and cutting-edge cinematics. Yet, one thing will remain the same: the famous Ecto-1. The first trailer for the upcoming film shows the classic movie car — a highly modified 1959 Cadillac Miller-Meteor Futura Duplex — still has a little gas in the tank, even after sitting in a barn for more than 30 years. "Afterlife" follows a character played by Finn Wolfhard (Mike from "Stranger Things") as he, his sister and his mom are evicted and move to an inherited farmhouse in Summerville, Oklahoma. The property, previously owned by the kids' grandfather, turns out to be a secret storage facility for all of the old Ghostbusters gear. Grandpa was Dr. Egon Spengler. The research, the uniforms, the ghost traps and the Ecto-1 are all tucked away and out of sight. Trevor, Wolfhard's character, finds the automotive relic and is able to start the old box of bolts. He and his sister Phoebe are then seen careening the Ecto-1 through a field and testing out the car's gunner seat in town.  Paul Rudd enters the picture as Mr. Grooberson, a teacher at the kids' school who shows an interest in Phoebe's ghost trap. As somebody who remembers the Manhattan Crossrip well, Grooberson schools the kids on the past and, with them, explores their connection to it all.  The trailer closes with a Bill Murray quote from the original film: "Call it fate, call it luck, call it karma ... I believe that everything happens for a reason." He, along with Dan Aykroyd and Sigourney Weaver, are expected to have some sort of involvement in the new movie, though it's unclear what that will be. We'll find out more next year when "Ghostbusters: Afterlife" opens summer 2020. P.S. How about that Ford Ranchero GT?